Advantech ADAM-4056S Modbus register map
12-channel sink-type isolated digital output module, RS485 Modbus RTU
- Official
- 18 registers
- Modbus RTU
- Revision 2 · 2026-10-17
- Identity: model
Official: Written from the manufacturer's documentation, but not tested on a device yet. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus RTU
- Unit ID
- 1
- Serial
- 9600 8N1 · 9600 baud, 8 data bits, none parity, 1 stop bit
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 1-based · wire address = address − 1
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 6 holding registers, 12 coils
- Groups
- 3
- Revision
- 2 · 2026-10-17
- Added
- ()
- File
- maps/advantech/adam-4056s.mbmap.json · 3 KB · history
- SHA-256
- f42be560d3bd59236f4bcfda660328d04d9b3e2716471277c28dce5c774e3c66
- Manufacturer
- advantech.com
Device identity
What a tool can read to check that this map fits the connected device (SPEC.md section 4.7). Registers with a role are read like any other register.
| Role | Register | Address | Type | Values |
|---|---|---|---|---|
| Model | Module name 1 | holding 211 | uint16 | 0x4056 = ADAM-4056S |
Sources and notes
- ADAM-4000 Data Acquisition Modules User's Manual · version Edition 10.7 Appendix G, table 8; type codes from chapters 5 and 6
Source: Advantech, "ADAM-4000 Data Acquisition Modules User's Manual", Edition 10.7, Appendix G (I/O Modbus mapping table)
- Addresses are the Modicon numbers of the manual (00001 = coil 1, 40001 = holding register 1).
- The module ships with the ADAM ASCII protocol; Appendix H of the manual switches it to Modbus RTU.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| CO | 17 | bool | RW | ||||
| CO | 18 | bool | RW | ||||
| CO | 19 | bool | RW | ||||
| CO | 20 | bool | RW | ||||
| CO | 21 | bool | RW | ||||
| CO | 22 | bool | RW | ||||
| CO | 23 | bool | RW | ||||
| CO | 24 | bool | RW | ||||
| CO | 25 | bool | RW | ||||
| CO | 26 | bool | RW | ||||
| CO | 27 | bool | RW | ||||
| CO | 28 | bool | RW | ||||
| HR | 211 | uint16 | R | ||||
| HR | 212 | uint16 | R | ||||
| HR | 213 | uint16 | R | ||||
| HR | 214 | uint16 | R | ||||
| HR | 215 | uint16 | R | ||||
| HR | 216 | uint16 | R |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).