Arch Meter PA310 Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/arch/meter-pa310.mbmap.json · 6 KB · history
- SHA-256
- 1be966fa927065d0448781e80285245c4e0e9d459691084f1c5047d080c83314
- Manufacturer
- archmeter.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table arch/meter-pa310; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/arch-meter-pa310.htm. Not verified against the manufacturer's documentation
- Arch Meter PA310.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 2 | float32 ABCD | R | ||||
| HR | 4096 | uint16 | R | ||||
| HR | 4097 | uint16 | R | ||||
| HR | 4098 | uint16 | R | ||||
| HR | 4100 | uint16 | R | ||||
| HR | 4114 | int16 | R | ||||
| HR | 4128 | int16 | R | ||||
| HR | 4129 | uint16 | R | ||||
| HR | 4130 | uint16 | R | ||||
| HR | 4131 | uint16 | R | ||||
| HR | 4132 | uint16 | R | ||||
| HR | 4133 | uint16 | R | ||||
| HR | 4134 | uint16 | R | ||||
| HR | 4135 | uint16 | R | ||||
| HR | 4136 | uint16 | R | ||||
| HR | 4137 | uint16 | R | ||||
| HR | 4144 | int16 | R | ||||
| HR | 4145 | int16 | R | ||||
| HR | 4146 | int16 | R | ||||
| HR | 4147 | uint16 | R | ||||
| HR | 4148 | int16 | R | ||||
| HR | 4149 | int16 | R | ||||
| HR | 4150 | int16 | R | ||||
| HR | 4151 | int16 | R | ||||
| HR | 4152 | int16 | R | ||||
| HR | 4153 | int16 | R | ||||
| HR | 4154 | int16 | R | ||||
| HR | 4155 | int16 | R | ||||
| HR | 4156 | int16 | R | ||||
| HR | 4157 | int16 | R | ||||
| HR | 4158 | int16 | R | ||||
| HR | 4159 | int16 | R | ||||
| HR | 4160 | int16 | R | ||||
| HR | 4161 | int16 | R | ||||
| HR | 4162 | int16 | R | ||||
| HR | 4163 | int16 | R | ||||
| HR | 4164 | int16 | R | ||||
| HR | 4165 | int16 | R | ||||
| HR | 4166 | int16 | R | ||||
| HR | 4167 | int16 | R | ||||
| HR | 4168 | int16 | R | ||||
| HR | 4169 | int16 | R | ||||
| HR | 4170 | int16 | R | ||||
| HR | 4171 | int16 | R | ||||
| HR | 4172 | int16 | R | ||||
| HR | 4173 | int16 | R | ||||
| HR | 4864 | float32 ABCD | R | ||||
| HR | 4866 | float32 ABCD | R | ||||
| HR | 4868 | float32 ABCD | R | ||||
| HR | 4870 | float32 ABCD | R |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).