Bytronic BY4100 Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/bytronic/by4100.mbmap.json · 7 KB · history
- SHA-256
- b59a1b53d24003769d88d7134d2e079a6c0297b490b1ddc4ffc0f1c5803e6954
- Manufacturer
- bytronic.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table bytronic/by4100; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/bytronic-by4100.htm. Not verified against the manufacturer's documentation
- Bytronic BY4100.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 512 | uint32 ABCD | R | ||||
| HR | 513 | uint32 ABCD | R | ||||
| HR | 514 | uint32 ABCD | R | ||||
| HR | 515 | uint32 ABCD | R | ||||
| HR | 516 | uint32 ABCD | R | ||||
| HR | 517 | uint32 ABCD | R | ||||
| HR | 518 | uint32 ABCD | R | ||||
| HR | 519 | uint32 ABCD | R | ||||
| HR | 520 | uint32 ABCD | R | ||||
| HR | 521 | uint32 ABCD | R | ||||
| HR | 523 | uint32 ABCD | R | ||||
| HR | 526 | uint32 ABCD | R | V | |||
| HR | 527 | uint32 ABCD | R | V | |||
| HR | 528 | uint32 ABCD | R | V | |||
| HR | 529 | uint32 ABCD | R | V | |||
| HR | 530 | uint32 ABCD | R | V | |||
| HR | 531 | uint32 ABCD | R | V | |||
| HR | 532 | uint32 ABCD | R | V | |||
| HR | 533 | uint32 ABCD | R | V | |||
| HR | 534 | uint32 ABCD | R | A | |||
| HR | 535 | uint32 ABCD | R | A | |||
| HR | 536 | uint32 ABCD | R | A | |||
| HR | 537 | uint32 ABCD | R | A | |||
| HR | 538 | uint32 ABCD | R | A | |||
| HR | 540 | uint32 ABCD | R | Hz | |||
| HR | 541 | uint32 ABCD | R | Cos | |||
| HR | 542 | uint32 ABCD | R | Cos | |||
| HR | 543 | uint32 ABCD | R | Cos | |||
| HR | 544 | uint32 ABCD | R | Cos | |||
| HR | 546 | int32 ABCD | R | W | |||
| HR | 548 | int32 ABCD | R | W | |||
| HR | 550 | int32 ABCD | R | W | |||
| HR | 552 | int32 ABCD | R | W | |||
| HR | 554 | int32 ABCD | R | var | |||
| HR | 556 | int32 ABCD | R | var | |||
| HR | 558 | int32 ABCD | R | var | |||
| HR | 560 | int32 ABCD | R | var | |||
| HR | 562 | uint32 ABCD | R | VA | |||
| HR | 564 | uint32 ABCD | R | VA | |||
| HR | 566 | uint32 ABCD | R | VA | |||
| HR | 568 | uint32 ABCD | R | VA | |||
| HR | 570 | uint32 ABCD | R | kWh | |||
| HR | 572 | uint32 ABCD | R | kWh | |||
| HR | 574 | uint32 ABCD | R | kvarh | |||
| HR | 576 | uint32 ABCD | R | h | |||
| HR | 578 | uint32 ABCD | R | min | |||
| HR | 579 | uint32 ABCD | R | h | |||
| HR | 581 | uint32 ABCD | R | min | |||
| HR | 582 | uint32 ABCD | R | s | |||
| HR | 586 | uint32 ABCD | R |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).