Carlo Gavazzi WM3 96 Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/carlo-gavazzi/wm3-96.mbmap.json · 6 KB · history
- SHA-256
- 53699644b5493c7dcc9cc2a76bc43091f767a48586d66247a963bb0da953f9f7
- Manufacturer
- gavazziautomation.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table carlo/gavazzi-wm3-96; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/carlo-gavazzi-wm3-96.htm. Not verified against the manufacturer's documentation
- Carlo Gavazzi WM3 96.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 4 | uint32 ABCD | R | A | |||
| HR | 8 | uint32 ABCD | R | ||||
| HR | 12 | uint32 ABCD | R | V | |||
| HR | 16 | uint32 ABCD | R | A | |||
| HR | 20 | uint32 ABCD | R | ||||
| HR | 24 | uint32 ABCD | R | V | |||
| HR | 28 | uint32 ABCD | R | A | |||
| HR | 32 | uint32 ABCD | R | ||||
| HR | 36 | uint32 ABCD | R | V | |||
| HR | 40 | uint32 ABCD | R | V | |||
| HR | 44 | uint32 ABCD | R | V | |||
| HR | 48 | uint32 ABCD | R | ||||
| HR | 52 | uint32 ABCD | R | ||||
| HR | 56 | uint32 ABCD | R | ||||
| HR | 60 | uint32 ABCD | R | ||||
| HR | 64 | uint32 ABCD | R | ||||
| HR | 68 | uint32 ABCD | R | ||||
| HR | 72 | uint32 ABCD | R | ||||
| HR | 76 | uint32 ABCD | R | ||||
| HR | 80 | uint32 ABCD | R | ||||
| HR | 84 | uint32 ABCD | R | V | |||
| HR | 88 | uint32 ABCD | R | A | |||
| HR | 92 | uint32 ABCD | R | ||||
| HR | 96 | uint32 ABCD | R | ||||
| HR | 100 | uint32 ABCD | R | ||||
| HR | 104 | uint32 ABCD | R | ||||
| HR | 108 | uint32 ABCD | R | ||||
| HR | 112 | uint32 ABCD | R | ||||
| HR | 116 | uint32 ABCD | R | ||||
| HR | 120 | uint32 ABCD | R | ||||
| HR | 124 | uint32 ABCD | R | ||||
| HR | 128 | uint32 ABCD | R | ||||
| HR | 132 | uint32 ABCD | R | ||||
| HR | 136 | uint32 ABCD | R | ||||
| HR | 140 | uint32 ABCD | R | ||||
| HR | 144 | uint32 ABCD | R | ||||
| HR | 148 | uint32 ABCD | R | ||||
| HR | 152 | uint32 ABCD | R | ||||
| HR | 156 | uint32 ABCD | R | ||||
| HR | 160 | uint32 ABCD | R | ||||
| HR | 164 | uint32 ABCD | R | ||||
| HR | 168 | uint32 ABCD | R | ||||
| HR | 172 | uint32 ABCD | R | ||||
| HR | 176 | uint32 ABCD | R | ||||
| HR | 180 | uint32 ABCD | R | A | |||
| HR | 184 | uint32 ABCD | R | ||||
| HR | 188 | uint32 ABCD | R | ||||
| HR | 192 | uint32 ABCD | R | ||||
| HR | 196 | uint32 ABCD | R | Hz | |||
| HR | 200 | uint32 ABCD | R |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).