Eaton IQ100 Series IQ130 / IQ140 / IQ150 Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/eaton/iq100-series-iq130-iq140-iq150.mbmap.json · 7 KB · history
- SHA-256
- 6900d916a97e3fc5c64104db32e00f76e679bf13ed5b0de557a39042cfd772e9
- Manufacturer
- eaton.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table eaton/iq100-series-iq130-iq140-iq150; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/eaton-iq100-series-iq130-iq140-iq150.htm. Not verified against the manufacturer's documentation
- Eaton IQ100 Series IQ130 / IQ140 / IQ150.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 16 | uint16 | R | unit: bit-mapped | |||
| HR | 17 | string[2] | R | ||||
| HR | 19 | uint16 | R | unit: 0 to 65535 | |||
| HR | 20 | uint16 | R | unit: bit-mapped | |||
| HR | 21 | uint16 | R | unit: 0-65535 | |||
| HR | 899 | float32 ABCD | R | W | |||
| HR | 901 | float32 ABCD | R | var | |||
| HR | 903 | float32 ABCD | R | VA | |||
| HR | 999 | float32 ABCD | R | voIts | |||
| HR | 1001 | float32 ABCD | R | V | |||
| HR | 1003 | float32 ABCD | R | voIts | |||
| HR | 1005 | float32 ABCD | R | V | |||
| HR | 1007 | float32 ABCD | R | V | |||
| HR | 1009 | float32 ABCD | R | V | |||
| HR | 1011 | float32 ABCD | R | A | |||
| HR | 1013 | float32 ABCD | R | A | |||
| HR | 1015 | float32 ABCD | R | A | |||
| HR | 1017 | float32 ABCD | R | W | |||
| HR | 1019 | float32 ABCD | R | var | |||
| HR | 1021 | float32 ABCD | R | VA | |||
| HR | 1025 | float32 ABCD | R | Hz | |||
| HR | 1027 | float32 ABCD | R | A | |||
| HR | 1099 | int32 ABCD | R | Wh | |||
| HR | 1101 | int32 ABCD | R | Wh | |||
| HR | 1103 | int32 ABCD | R | Wh | |||
| HR | 1105 | int32 ABCD | R | Wh | |||
| HR | 1107 | int32 ABCD | R | varh | |||
| HR | 1109 | int32 ABCD | R | varh | |||
| HR | 1111 | int32 ABCD | R | varh | |||
| HR | 1113 | int32 ABCD | R | varh | |||
| HR | 1115 | int32 ABCD | R | unit: 0 to 99999999 | |||
| HR | 1999 | float32 ABCD | R | A | |||
| HR | 2001 | float32 ABCD | R | A | |||
| HR | 2003 | float32 ABCD | R | A | |||
| HR | 2005 | float32 ABCD | R | W | |||
| HR | 2007 | float32 ABCD | R | var | |||
| HR | 2009 | float32 ABCD | R | W | |||
| HR | 2011 | float32 ABCD | R | var | |||
| HR | 2013 | float32 ABCD | R | unit: -9999 M to +9999 M | |||
| HR | 2015 | float32 ABCD | R | unit: -1.00 to +1.00 | |||
| HR | 2017 | float32 ABCD | R | unit: -1.00 to +1.00 | |||
| HR | 3001 | float32 ABCD | R | V | |||
| HR | 3129 | float32 ABCD | R | unit: -1.00 to +1.00 | |||
| HR | 4099 | int16 | R | unit: -1800 to +1800 | |||
| HR | 4100 | int16 | R | unit: -1800 to +1800 | |||
| HR | 4101 | int16 | R | unit: -1800 to +1800 | |||
| HR | 4102 | int16 | R | unit: -1800 to +1800 | |||
| HR | 4103 | int16 | R | unit: -1800 to +1800 | |||
| HR | 4104 | int16 | R | unit: -1800 to +1800 | |||
| HR | 4999 | uint16 | R | unit: bit-mapped |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).