Electrex Femto Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/electrex/femto.mbmap.json · 7 KB · history
- SHA-256
- ba3991760e749cc5eb6702ab55b2011328c27eeb4b9a89f912c457d65b5b46d0
- Manufacturer
- electrex.it
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table electrex/femto; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/electrex-femto.htm. Not verified against the manufacturer's documentation
- Electrex Femto.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 200 | float32 ABCD | R | % | |||
| HR | 202 | float32 ABCD | R | % | |||
| HR | 204 | float32 ABCD | R | % | |||
| HR | 206 | float32 ABCD | R | % | |||
| HR | 208 | float32 ABCD | R | % | |||
| HR | 210 | float32 ABCD | R | % | |||
| HR | 212 | float32 ABCD | R | % | |||
| HR | 214 | float32 ABCD | R | % | |||
| HR | 216 | float32 ABCD | R | % | |||
| HR | 218 | float32 ABCD | R | Hz | |||
| HR | 220 | float32 ABCD | R | V | |||
| HR | 222 | float32 ABCD | R | V | |||
| HR | 224 | float32 ABCD | R | V | |||
| HR | 226 | float32 ABCD | R | V | |||
| HR | 228 | float32 ABCD | R | V | |||
| HR | 230 | float32 ABCD | R | V | |||
| HR | 232 | float32 ABCD | R | A | |||
| HR | 234 | float32 ABCD | R | A | |||
| HR | 236 | float32 ABCD | R | A | |||
| HR | 238 | float32 ABCD | R | A | |||
| HR | 240 | float32 ABCD | R | W | |||
| HR | 242 | float32 ABCD | R | W | |||
| HR | 244 | float32 ABCD | R | W | |||
| HR | 246 | float32 ABCD | R | var | |||
| HR | 248 | float32 ABCD | R | var | |||
| HR | 250 | float32 ABCD | R | var | |||
| HR | 252 | float32 ABCD | R | VA | |||
| HR | 254 | float32 ABCD | R | VA | |||
| HR | 256 | float32 ABCD | R | VA | |||
| HR | 258 | float32 ABCD | R | ||||
| HR | 260 | float32 ABCD | R | ||||
| HR | 262 | float32 ABCD | R | ||||
| HR | 264 | float32 ABCD | R | % | |||
| HR | 266 | float32 ABCD | R | % | |||
| HR | 268 | float32 ABCD | R | % | |||
| HR | 270 | float32 ABCD | R | V | |||
| HR | 272 | float32 ABCD | R | V | |||
| HR | 274 | float32 ABCD | R | A | |||
| HR | 276 | float32 ABCD | R | W | |||
| HR | 278 | float32 ABCD | R | var | |||
| HR | 280 | float32 ABCD | R | VA | |||
| HR | 282 | float32 ABCD | R | ||||
| HR | 332 | float32 ABCD | R | A | |||
| HR | 334 | float32 ABCD | R | A | |||
| HR | 336 | float32 ABCD | R | A | |||
| HR | 344 | float32 ABCD | R | W | |||
| HR | 346 | float32 ABCD | R | var | |||
| HR | 348 | float32 ABCD | R | var | |||
| HR | 350 | float32 ABCD | R | VA | |||
| HR | 352 | float32 ABCD | R | W |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).