Elmeasure MPS8000 / MPU5110 Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/elmeasure/mps8000-mpu5110.mbmap.json · 6 KB · history
- SHA-256
- 98d436f7dbf7ff42b4c28bc3746ec96b1ff2a3fcb8d0446467a4965c914e67fd
- Manufacturer
- elmeasure.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table elmeasure/mps8000-mpu5110; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/elmeasure-mps8000-mpu5110.htm. Not verified against the manufacturer's documentation
- Elmeasure MPS8000 / MPU5110.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 100 | float32 ABCD | R | ||||
| HR | 102 | float32 ABCD | R | ||||
| HR | 104 | float32 ABCD | R | ||||
| HR | 106 | float32 ABCD | R | ||||
| HR | 108 | float32 ABCD | R | ||||
| HR | 110 | float32 ABCD | R | ||||
| HR | 112 | float32 ABCD | R | ||||
| HR | 114 | float32 ABCD | R | ||||
| HR | 116 | float32 ABCD | R | ||||
| HR | 118 | float32 ABCD | R | ||||
| HR | 120 | float32 ABCD | R | ||||
| HR | 122 | float32 ABCD | R | ||||
| HR | 124 | float32 ABCD | R | ||||
| HR | 126 | float32 ABCD | R | ||||
| HR | 128 | float32 ABCD | R | ||||
| HR | 130 | float32 ABCD | R | ||||
| HR | 132 | float32 ABCD | R | ||||
| HR | 134 | float32 ABCD | R | ||||
| HR | 136 | float32 ABCD | R | ||||
| HR | 138 | float32 ABCD | R | ||||
| HR | 140 | float32 ABCD | R | ||||
| HR | 142 | float32 ABCD | R | ||||
| HR | 144 | float32 ABCD | R | ||||
| HR | 146 | float32 ABCD | R | ||||
| HR | 148 | float32 ABCD | R | ||||
| HR | 150 | float32 ABCD | R | ||||
| HR | 152 | float32 ABCD | R | ||||
| HR | 154 | float32 ABCD | R | ||||
| HR | 156 | float32 ABCD | R | ||||
| HR | 158 | float32 ABCD | R | ||||
| HR | 160 | float32 ABCD | R | ||||
| HR | 162 | float32 ABCD | R | ||||
| HR | 164 | float32 ABCD | R | ||||
| HR | 174 | float32 ABCD | R | ||||
| HR | 176 | float32 ABCD | R | ||||
| HR | 182 | float32 ABCD | R | ||||
| HR | 184 | float32 ABCD | R | ||||
| HR | 186 | float32 ABCD | R | ||||
| HR | 188 | float32 ABCD | R | ||||
| HR | 190 | float32 ABCD | R | ||||
| HR | 192 | float32 ABCD | R | ||||
| HR | 194 | float32 ABCD | R | ||||
| HR | 214 | float32 ABCD | R | ||||
| HR | 216 | uint32 ABCD | R | ||||
| HR | 220 | uint32 ABCD | R | ||||
| HR | 230 | uint32 ABCD | R | ||||
| HR | 232 | float32 ABCD | R | ||||
| HR | 234 | float32 ABCD | R | ||||
| HR | 236 | float32 ABCD | R | ||||
| HR | 238 | float32 ABCD | R |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).