GE EPM 5300 Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/ge/epm-5300.mbmap.json · 6 KB · history
- SHA-256
- 023dc7ff5912637d9d17cfbcafca15c438502176f26977a01326f3e20d3ff69b
- Manufacturer
- gevernova.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table ge/epm-5300; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/ge-epm-5300.htm. Not verified against the manufacturer's documentation
- GE EPM 5300.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 278 | uint16 | R | ||||
| HR | 279 | uint16 | R | ||||
| HR | 280 | uint16 | R | ||||
| HR | 281 | uint16 | R | ||||
| HR | 282 | uint16 | R | ||||
| HR | 283 | uint16 | R | ||||
| HR | 284 | uint16 | R | ||||
| HR | 285 | uint16 | R | ||||
| HR | 286 | uint16 | R | ||||
| HR | 287 | uint16 | R | ||||
| HR | 288 | uint16 | R | ||||
| HR | 289 | uint16 | R | ||||
| HR | 290 | uint16 | R | ||||
| HR | 317 | uint16 | R | ||||
| HR | 318 | uint16 | R | ||||
| HR | 319 | uint16 | R | ||||
| HR | 320 | uint16 | R | ||||
| HR | 321 | uint16 | R | ||||
| HR | 322 | uint16 | R | ||||
| HR | 323 | uint16 | R | ||||
| HR | 324 | uint16 | R | ||||
| HR | 325 | uint16 | R | ||||
| HR | 326 | uint16 | R | ||||
| HR | 327 | uint16 | R | ||||
| HR | 328 | uint16 | R | ||||
| HR | 329 | uint16 | R | ||||
| HR | 356 | uint16 | R | ||||
| HR | 357 | uint16 | R | ||||
| HR | 358 | uint16 | R | ||||
| HR | 359 | uint16 | R | ||||
| HR | 360 | uint16 | R | ||||
| HR | 361 | uint16 | R | ||||
| HR | 362 | uint16 | R | ||||
| HR | 363 | uint16 | R | ||||
| HR | 364 | uint16 | R | ||||
| HR | 365 | uint16 | R | ||||
| HR | 366 | uint16 | R | ||||
| HR | 367 | uint16 | R | ||||
| HR | 395 | uint16 | R | ||||
| HR | 396 | uint16 | R | ||||
| HR | 397 | uint16 | R | ||||
| HR | 398 | uint16 | R | ||||
| HR | 399 | uint16 | R | ||||
| HR | 400 | uint16 | R | ||||
| HR | 401 | uint16 | R | ||||
| HR | 402 | uint16 | R | ||||
| HR | 403 | uint16 | R | ||||
| HR | 404 | uint16 | R | ||||
| HR | 405 | uint16 | R | ||||
| HR | 406 | uint16 | R |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).