Ginlong Solis PV Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/ginlong/solis-pv.mbmap.json · 7 KB · history
- SHA-256
- fc0470abcde7fc1cc543a22c835fa3cfaa214aec3151cf87e6a8548cdfdda5d9
- Manufacturer
- ginlong.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table ginlong/solis-pv; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/ginlong-solis-pv.htm. Not verified against the manufacturer's documentation
- Ginlong Solis PV.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 3021 | uint16 | R | A | |||
| HR | 3022 | uint16 | R | ||||
| HR | 3023 | uint16 | R | A | |||
| HR | 3024 | uint16 | R | ||||
| HR | 3025 | uint16 | R | ||||
| HR | 3026 | uint16 | R | ||||
| HR | 3028 | uint32 ABCD | R | kW | |||
| HR | 3030 | uint32 ABCD | R | kW | |||
| HR | 3032 | uint32 ABCD | R | kW | |||
| HR | 3034 | uint16 | R | kW | |||
| HR | 3035 | uint16 | R | kW | |||
| HR | 3036 | uint32 ABCD | R | kW | |||
| HR | 3038 | uint32 ABCD | R | kW | |||
| HR | 3048 | uint16 | R | V | |||
| HR | 3049 | uint16 | R | A | |||
| HR | 3050 | uint16 | R | V | |||
| HR | 3051 | uint16 | R | A | |||
| HR | 3052 | uint16 | R | V | |||
| HR | 3053 | uint16 | R | A | |||
| HR | 3054 | uint16 | R | V | |||
| HR | 3055 | uint16 | R | A | |||
| HR | 3056 | uint32 ABCD | R | W | |||
| HR | 3070 | uint16 | R | V | |||
| HR | 3071 | uint16 | R | V | |||
| HR | 3072 | uint16 | R | V | |||
| HR | 3073 | uint16 | R | V | |||
| HR | 3074 | uint16 | R | V | |||
| HR | 3075 | uint16 | R | A | |||
| HR | 3076 | uint16 | R | A | |||
| HR | 3077 | uint16 | R | A | |||
| HR | 3078 | int32 ABCD | R | W | |||
| HR | 3082 | int32 ABCD | R | V | |||
| HR | 3091 | uint16 | R | ||||
| HR | 3092 | uint16 | R | ||||
| HR | 3093 | uint16 | R | Hz | |||
| HR | 3094 | uint16 | R | ||||
| HR | 3103 | uint16 | R | ||||
| HR | 3104 | int16 | R | ||||
| HR | 3114 | uint16 | R | ||||
| HR | 3125 | uint32 ABCD | R | Wh | |||
| HR | 3127 | uint16 | R | ||||
| HR | 3128 | uint16 | R | ||||
| HR | 3129 | int32 ABCD | R | ||||
| HR | 3131 | uint16 | R | ||||
| HR | 3132 | uint16 | R | V | |||
| HR | 3133 | int16 | R | A | |||
| HR | 3134 | uint16 | R | ||||
| HR | 3135 | uint16 | R | V | |||
| HR | 3136 | uint16 | R | V | |||
| HR | 3137 | uint16 | R | A |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).