Heyuan DZS900 Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/heyuan/dzs900.mbmap.json · 7 KB · history
- SHA-256
- a8b6294aa2e1c5e204d2ca8f0764115c60372950bd2f7710beb617d3a6237d40
- Manufacturer
- heyuanintel.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table heyuan/dzs900; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/heyuan-dzs900.htm. Not verified against the manufacturer's documentation
- Heyuan DZS900.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 4096 | uint16 | R | ||||
| HR | 4097 | uint16 | R | ||||
| HR | 4098 | uint16 | R | ||||
| HR | 4099 | uint16 | R | ||||
| HR | 4100 | uint16 | R | ||||
| HR | 4101 | uint16 | R | ||||
| HR | 4102 | uint16 | R | ||||
| HR | 4103 | uint16 | R | ||||
| HR | 4104 | uint16 | R | ||||
| HR | 4105 | int16 | R | ||||
| HR | 4106 | int16 | R | ||||
| HR | 4107 | int16 | R | ||||
| HR | 4108 | int16 | R | ||||
| HR | 4109 | int16 | R | ||||
| HR | 4110 | int16 | R | ||||
| HR | 4111 | int16 | R | ||||
| HR | 4112 | int16 | R | ||||
| HR | 4113 | int16 | R | ||||
| HR | 4114 | int16 | R | ||||
| HR | 4115 | int16 | R | ||||
| HR | 4116 | int16 | R | ||||
| HR | 4117 | int16 | R | ||||
| HR | 4118 | int16 | R | ||||
| HR | 4119 | int16 | R | ||||
| HR | 4120 | int16 | R | ||||
| HR | 4121 | int16 | R | ||||
| HR | 4122 | int16 | R | ||||
| HR | 4123 | int16 | R | ||||
| HR | 4124 | int16 | R | ||||
| HR | 4125 | int16 | R | ||||
| HR | 4126 | int16 | R | ||||
| HR | 4127 | int16 | R | ||||
| HR | 4128 | int16 | R | ||||
| HR | 4129 | int16 | R | ||||
| HR | 4130 | int16 | R | ||||
| HR | 4131 | int16 | R | ||||
| HR | 4132 | int16 | R | ||||
| HR | 4133 | int16 | R | ||||
| HR | 4134 | int16 | R | ||||
| HR | 4135 | int16 | R | ||||
| HR | 4136 | int16 | R | ||||
| HR | 4137 | int16 | R | ||||
| HR | 4138 | int16 | R | ||||
| HR | 4139 | int16 | R | ||||
| HR | 4140 | int16 | R | ||||
| HR | 4141 | int16 | R | ||||
| HR | 4142 | int16 | R | ||||
| HR | 4143 | int16 | R | ||||
| HR | 4144 | int16 | R | ||||
| HR | 4145 | int16 | R |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).