Honeywell Elster A1140 / A1700 Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/honeywell/a1140-a1700.mbmap.json · 6 KB · history
- SHA-256
- b6bd8810c9ef127403317f71a5e8a00d8616c934acd28d36627b04a61d116deb
- Manufacturer
- honeywell.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table elster/a1140-a1700; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/elster-a1140-a1700.htm. Not verified against the manufacturer's documentation
- Elster A1140 / A1700.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 1 | float32 ABCD | R | ||||
| HR | 3 | float32 ABCD | R | ||||
| HR | 5 | float32 ABCD | R | ||||
| HR | 7 | float32 ABCD | R | ||||
| HR | 9 | float32 ABCD | R | ||||
| HR | 11 | float32 ABCD | R | ||||
| HR | 13 | float32 ABCD | R | ||||
| HR | 15 | float32 ABCD | R | ||||
| HR | 17 | float32 ABCD | R | ||||
| HR | 19 | float32 ABCD | R | ||||
| HR | 21 | float32 ABCD | R | ||||
| HR | 23 | float32 ABCD | R | ||||
| HR | 25 | float32 ABCD | R | ||||
| HR | 27 | float32 ABCD | R | ||||
| HR | 29 | float32 ABCD | R | ||||
| HR | 31 | float32 ABCD | R | ||||
| HR | 33 | float32 ABCD | R | ||||
| HR | 35 | float32 ABCD | R | ||||
| HR | 37 | float32 ABCD | R | ||||
| HR | 39 | float32 ABCD | R | ||||
| HR | 41 | float32 ABCD | R | ||||
| HR | 43 | float32 ABCD | R | ||||
| HR | 45 | float32 ABCD | R | ||||
| HR | 47 | float32 ABCD | R | ||||
| HR | 49 | float32 ABCD | R | ||||
| HR | 53 | int32 ABCD | R | ||||
| HR | 55 | int32 ABCD | R | ||||
| HR | 57 | int32 ABCD | R | ||||
| HR | 59 | int32 ABCD | R | ||||
| HR | 63 | int32 ABCD | R | ||||
| HR | 65 | int32 ABCD | R | ||||
| HR | 67 | int32 ABCD | R | ||||
| HR | 69 | int32 ABCD | R | ||||
| HR | 71 | int32 ABCD | R | ||||
| HR | 73 | int32 ABCD | R | ||||
| HR | 75 | int32 ABCD | R | ||||
| HR | 77 | int32 ABCD | R | ||||
| HR | 79 | int32 ABCD | R | ||||
| HR | 81 | int32 ABCD | R | ||||
| HR | 83 | int32 ABCD | R | ||||
| HR | 85 | int32 ABCD | R | ||||
| HR | 95 | uint16 | R | ||||
| HR | 96 | uint16 | R | ||||
| HR | 97 | int32 ABCD | R | ||||
| HR | 99 | int32 ABCD | R | ||||
| HR | 101 | int32 ABCD | R | ||||
| HR | 103 | int32 ABCD | R | ||||
| HR | 105 | int32 ABCD | R | ||||
| HR | 107 | int32 ABCD | R | ||||
| HR | 109 | int32 ABCD | R |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).