Integra CI3 / RI3 Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/integra/ci3-ri3.mbmap.json · 6 KB · history
- SHA-256
- 3bb88cb3a636c5ee65ea57654577c43c44bd9105052a5b41bbfce6412a150991
- Manufacturer
- integra-metering.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table integra/ci3-ri3; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/integra-ci3-ri3.htm. Not verified against the manufacturer's documentation
- Integra CI3 / RI3.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 1 | uint16 | R | V | |||
| HR | 2 | uint16 | R | V | |||
| HR | 3 | uint16 | R | V | |||
| HR | 4 | uint16 | R | A | |||
| HR | 5 | uint16 | R | A | |||
| HR | 6 | uint16 | R | A | |||
| HR | 7 | uint16 | R | kW | |||
| HR | 8 | uint16 | R | kW | |||
| HR | 9 | uint16 | R | kW | |||
| HR | 10 | uint16 | R | kVA | |||
| HR | 11 | uint16 | R | kVA | |||
| HR | 12 | uint16 | R | kVA | |||
| HR | 13 | uint16 | R | kvar | |||
| HR | 14 | uint16 | R | kvar | |||
| HR | 15 | uint16 | R | kvar | |||
| HR | 19 | uint16 | R | ° | |||
| HR | 20 | uint16 | R | ° | |||
| HR | 21 | uint16 | R | ° | |||
| HR | 22 | uint16 | R | A | |||
| HR | 23 | uint16 | R | V | |||
| HR | 24 | uint16 | R | V | |||
| HR | 25 | uint16 | R | V | |||
| HR | 26 | uint16 | R | V | |||
| HR | 27 | uint16 | R | A | |||
| HR | 28 | uint16 | R | A | |||
| HR | 29 | uint16 | R | V | |||
| HR | 30 | uint16 | R | kW | |||
| HR | 31 | uint16 | R | kVA | |||
| HR | 32 | uint16 | R | kvar | |||
| HR | 34 | uint16 | R | ° | |||
| HR | 35 | uint16 | R | Hz | |||
| HR | 36 | uint16 | R | kWh | |||
| HR | 37 | uint16 | R | MWh | |||
| HR | 38 | uint16 | R | kWh | |||
| HR | 39 | uint16 | R | MWh | |||
| HR | 40 | uint16 | R | kvarh | |||
| HR | 41 | uint16 | R | MVArh | |||
| HR | 42 | uint16 | R | kvarh | |||
| HR | 43 | uint16 | R | MVArh | |||
| HR | 44 | uint16 | R | kAh | |||
| HR | 45 | uint16 | R | MVAh | |||
| HR | 46 | uint16 | R | Ah | |||
| HR | 47 | uint16 | R | kAh | |||
| HR | 48 | uint16 | R | kW | |||
| HR | 49 | uint16 | R | kW | |||
| HR | 50 | uint16 | R | kVA | |||
| HR | 51 | uint16 | R | kVA | |||
| HR | 52 | uint16 | R | A | |||
| HR | 53 | uint16 | R | A | |||
| HR | 54 | uint16 | R | A |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).