JXCT JXBS-3001-NPK-RS Modbus register map
7-in-1 soil sensor — moisture, temperature, conductivity, pH, nitrogen, phosphorus, potassium (holding registers, integer types).
- Unofficial
- 7 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 7 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/jxct/jxbs-3001-npk-rs.mbmap.json · 2 KB · history
- SHA-256
- 10735c9cc2ba86dab1b2a7ee40e14a9bab8942216b60da6884e8ae9625ffeeef
- Manufacturer
- jxct-iot.com
Sources and notes
Source: Omni Console device library (OmniCoreST), modbus-library/jxct-jxbs-3001-npk-rs.toml; Source: jxct-jxbs-3001-soil-7in1-npk-rs485-modbus.pdf. Not verified against the manufacturer's documentation
- JXCT JXBS-3001-NPK-RS.
- Converted automatically from the Omni Console device library (OmniCoreST).
- Not verified against the manufacturer's documentation.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
- | JXCT JXBS-3001-NPK-RS 7-in-1 Soil Sensor — Modbus register map for Omni Console
- |
- | Source: jxct-jxbs-3001-soil-7in1-npk-rs485-modbus.pdf
- | - 7-in-1 soil sensor: moisture, temperature, conductivity, pH, N, P, K. RS485 Modbus RTU.
- | - Holding registers (FC03).
- | - Protocol addresses are the hex register addresses shown in the register table (0-based).
- | - Factory defaults: slave=1, baud=9600, 8N1.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 6 | uint16 | R | pH | ×0.01 | ||
| HR | 18 | uint16 | R | %RH | ×0.1 | ||
| HR | 19 | int16 | R | °C | ×0.1 | ||
| HR | 21 | uint16 | R | unit: µs/cm | |||
| HR | 30 | uint16 | R | unit: mg/kg | |||
| HR | 31 | uint16 | R | unit: mg/kg | |||
| HR | 32 | uint16 | R | unit: mg/kg |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).