JXCT JXBS-3001-TR Modbus register map
Capacitive soil temperature and humidity sensor — soil moisture (u16 ×0.1%RH), soil temperature (s16 ×0.1°C), holding registers.
- Unofficial
- 2 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 2 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/jxct/jxbs-3001-tr.mbmap.json · 2 KB · history
- SHA-256
- 8ebba259d0f7e9f299b318896e7d9f649899596b2763badab3d66769a526bd2f
- Manufacturer
- jxct-iot.com
Sources and notes
Source: Omni Console device library (OmniCoreST), modbus-library/jxct-jxbs-3001-tr.toml; Source: jxct-soil-temp-humidity-rs485-modbus.pdf. Not verified against the manufacturer's documentation
- JXCT JXBS-3001-TR.
- Converted automatically from the Omni Console device library (OmniCoreST).
- Not verified against the manufacturer's documentation.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
- | JXCT JXBS-3001-TR Soil Temperature & Humidity Sensor — Modbus register map for Omni Console
- |
- | Source: jxct-soil-temp-humidity-rs485-modbus.pdf
- | - Capacitive soil temperature and humidity sensor, RS485 Modbus RTU.
- | - Holding registers (FC03).
- | - Protocol address = PLC address − 40001 (standard Modicon convention).
- | - Temperature is signed (negative soil temperatures supported).
- | - Factory defaults: slave=1, baud=9600, 8N1.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 2 | uint16 | R | %RH | ×0.1 | ||
| HR | 3 | int16 | R | °C | ×0.1 |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).