MBMap Registry
  1. Devices
  2. Korenix
  3. JetI/O 6510

Korenix JetI/O 6510 Modbus register map

8-CH analog input Ethernet I/O server, Modbus/TCP. Range set globally at holding reg 10 (08=±10V,09=±5V,0A=±1V,0B=±500mV,0C=±150mV,0D=±20mA). Measured values in FC04 input registers addr 0-7 (s16, mV or µA). Holding regs: watchdog (0-2), firmware/name (3-4), calibration (6-12), per-channel low/high alarm thresholds ch0-7 (13-28), channel mask (29), alarm enable (30), SNMP trap config (31-40).

  • Unofficial
  • 41 registers
  • Revision 2

Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.

Download .mbmap.json Raw JSON View on GitHub Suggest a correction Report a problem

Communication

Protocol
Modbus TCP and RTUdefault
Unit ID
1default
TCP port
502default
Serial
9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
Byte / word order
ABCD · bytes big-endian, words high first
Addresses
0-based

Connection values are defaults: the device may be configured differently.

Map

Registers
41 holding registers
Revision
2
Added
()
File
maps/korenix/jeti-o-6510.mbmap.json · 7 KB · history
SHA-256
fa26da6826913a8378be34bd2f879531db001a88e5dd5c8230d95d3b90fc1e0b
Manufacturer
beijerelectronics.com

Sources and notes

Source: Omni Console device library (OmniCoreST), modbus-library/korenix-jetio-6510.toml; Source: JetI/O 6510 User's Manual V0.1 (Jan. 2008). Not verified against the manufacturer's documentation

  • Korenix JetI/O 6510.
  • Converted automatically from the Omni Console device library (OmniCoreST).
  • Not verified against the manufacturer's documentation.
  • Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
  • | Korenix JetI/O 6510 Industrial Intelligent Ethernet I/O Server
  • |
  • | Source: JetI/O 6510 User's Manual V0.1 (Jan. 2008)
  • | Protocol: Modbus/TCP (Ethernet port 502); FC03 read holding, FC04 read input, FC06 write single
  • | Module: 8-channel analog input, 16-bit, configurable range per-module (not per-channel):
  • | 08H=±10V, 09H=±5V, 0AH=±1V, 0BH=±500mV, 0CH=±150mV, 0DH=±20mA
  • |
  • | IMPORTANT: Measured analog values live in the FC04 Input Register space (Modicon 30001-30008),
  • | addresses 0-7. Holding registers (FC03, Modicon 40001-40041) are configuration only.
  • | Input register values are signed 16-bit; units depend on selected range
  • | (e.g. ±10V range: -10000 ~ +10000 = mV; ±20mA range: -20000 ~ +20000 = µA).
AreaAddressNameTypeAccessUnitScaleDescription
HR 0 uint16 R
HR 1 uint16 R
HR 2 uint16 R
HR 3 uint16 R
HR 4 uint16 R
HR 5 uint16 R
HR 6 uint16 R
HR 7 uint16 R
HR 8 uint16 R
HR 9 uint16 R
HR 10 uint16 R
HR 11 uint16 R
HR 12 uint16 R
HR 13 int16 R
HR 14 int16 R
HR 15 int16 R
HR 16 int16 R
HR 17 int16 R
HR 18 int16 R
HR 19 int16 R
HR 20 int16 R
HR 21 int16 R
HR 22 int16 R
HR 23 int16 R
HR 24 int16 R
HR 25 int16 R
HR 26 int16 R
HR 27 int16 R
HR 28 int16 R
HR 29 uint16 R
HR 30 uint16 R
HR 31 uint16 R
HR 32 uint16 R
HR 33 uint16 R
HR 34 uint16 R
HR 35 uint16 R
HR 36 uint16 R
HR 37 uint16 R
HR 38 uint16 R
HR 39 uint16 R
HR 40 uint16 R

Help improve this map

Esc