Outback Power MATE3S Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/outback/power-mate3s.mbmap.json · 7 KB · history
- SHA-256
- 1470d5081119dadf83e0d295e7d6bf4e76d581699369cb5c3b77306276c6d2ab
- Manufacturer
- outbackpower.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table outback/power-mate3s; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/outback-power-mate3s.htm. Not verified against the manufacturer's documentation
- Outback Power MATE3S.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 40520 | uint16 | R | A | |||
| HR | 40521 | uint16 | R | A | |||
| HR | 40522 | uint16 | R | A | |||
| HR | 40523 | uint16 | R | A | |||
| HR | 40524 | int16 | R | ||||
| HR | 40525 | uint16 | R | V | |||
| HR | 40526 | uint16 | R | V | |||
| HR | 40527 | uint16 | R | V | |||
| HR | 40528 | uint16 | R | V | |||
| HR | 40529 | uint16 | R | V | |||
| HR | 40530 | uint16 | R | V | |||
| HR | 40531 | int16 | R | ||||
| HR | 40532 | int16 | R | W | |||
| HR | 40533 | int16 | R | ||||
| HR | 40534 | uint16 | R | Hz | |||
| HR | 40535 | int16 | R | ||||
| HR | 40536 | int16 | R | VA | |||
| HR | 40537 | int16 | R | ||||
| HR | 40538 | int16 | R | var | |||
| HR | 40539 | int16 | R | ||||
| HR | 40540 | int16 | R | % | |||
| HR | 40541 | int16 | R | ||||
| HR | 40542 | uint32 ABCD | R | Wh | |||
| HR | 40544 | int16 | R | ||||
| HR | 40545 | uint16 | R | A | |||
| HR | 40546 | int16 | R | ||||
| HR | 40547 | uint16 | R | V | |||
| HR | 40548 | int16 | R | ||||
| HR | 40549 | int16 | R | W | |||
| HR | 40550 | int16 | R | ||||
| HR | 40551 | int16 | R | °C | |||
| HR | 40552 | int16 | R | °C | |||
| HR | 40553 | int16 | R | °C | |||
| HR | 40554 | int16 | R | °C | |||
| HR | 40555 | int16 | R | ||||
| HR | 40556 | uint16 | R | ||||
| HR | 40557 | uint16 | R | ||||
| HR | 40558 | uint32 ABCD | R | ||||
| HR | 40560 | uint32 ABCD | R | ||||
| HR | 40562 | uint32 ABCD | R | ||||
| HR | 40564 | uint32 ABCD | R | ||||
| HR | 40566 | uint32 ABCD | R | ||||
| HR | 40568 | uint32 ABCD | R | ||||
| HR | 40630 | uint16 | R | ||||
| HR | 40631 | uint16 | R | W | |||
| HR | 40632 | int16 | R | ||||
| HR | 40633 | uint16 | R | VA | |||
| HR | 40634 | int16 | R | ||||
| HR | 40635 | int16 | R | var | |||
| HR | 40636 | int16 | R | var |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).