Schrack NA96 Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/schrack/na96.mbmap.json · 6 KB · history
- SHA-256
- d724063761c98407e63c0ad7ace4186438262142669f89cbfdb02b52ae8bed28
- Manufacturer
- schrack.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table schrack/na96; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/schrack-na96-.htm. Not verified against the manufacturer's documentation
- Schrack NA96.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 51 | int32 ABCD | R | mV | |||
| HR | 769 | int32 ABCD | R | mV | |||
| HR | 773 | int32 ABCD | R | mV | |||
| HR | 777 | int32 ABCD | R | mV | |||
| HR | 781 | int32 ABCD | R | mA | |||
| HR | 785 | int32 ABCD | R | mA | |||
| HR | 789 | int32 ABCD | R | mA | |||
| HR | 793 | int32 ABCD | R | ||||
| HR | 797 | int32 ABCD | R | ||||
| HR | 801 | int32 ABCD | R | ||||
| HR | 805 | int32 ABCD | R | ||||
| HR | 809 | int32 ABCD | R | mV | |||
| HR | 813 | int32 ABCD | R | mV | |||
| HR | 821 | int32 ABCD | R | ||||
| HR | 825 | uint16 | R | Hz | |||
| HR | 827 | uint16 | R | ||||
| HR | 829 | uint16 | R | ||||
| HR | 833 | uint16 | R | ||||
| HR | 835 | int32 ABCD | R | ||||
| HR | 840 | int32 ABCD | R | ||||
| HR | 848 | int32 ABCD | R | ||||
| HR | 852 | int32 ABCD | R | ||||
| HR | 857 | int32 ABCD | R | ||||
| HR | 861 | int32 ABCD | R | ||||
| HR | 865 | int32 ABCD | R | ||||
| HR | 869 | int32 ABCD | R | ||||
| HR | 876 | int32 ABCD | R | ||||
| HR | 880 | int32 ABCD | R | ||||
| HR | 884 | int32 ABCD | R | ||||
| HR | 891 | int32 ABCD | R | ||||
| HR | 895 | int32 ABCD | R | ||||
| HR | 899 | int32 ABCD | R | ||||
| HR | 903 | uint16 | R | ||||
| HR | 912 | uint16 | R | ||||
| HR | 914 | uint16 | R | ||||
| HR | 916 | uint16 | R | ||||
| HR | 918 | uint16 | R | ||||
| HR | 920 | uint16 | R | ||||
| HR | 922 | uint16 | R | ||||
| HR | 924 | int32 ABCD | R | ||||
| HR | 928 | int32 ABCD | R | ||||
| HR | 932 | int32 ABCD | R | ||||
| HR | 936 | int32 ABCD | R | ||||
| HR | 940 | int32 ABCD | R | ||||
| HR | 944 | int32 ABCD | R | ||||
| HR | 948 | int32 ABCD | R | ||||
| HR | 952 | int32 ABCD | R | mV | |||
| HR | 956 | int32 ABCD | R | mV | |||
| HR | 960 | int32 ABCD | R | mV | |||
| HR | 964 | int32 ABCD | R | mV |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).