Solarx Power Hybrid X1 Hybrid X3 / X1AC Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/solarx/power-hybrid-x1-hybrid-x3-x1ac.mbmap.json · 7 KB · history
- SHA-256
- d049759d089fa7c392294981968659f5c5b877774076cd3e6a3f93d2d132a39e
- Manufacturer
- solaxpower.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table solarx/power-hybrid-x1-hybrid-x3-x1ac; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/solarx-power-hybrid-x1-hybrid-x3-x1ac.htm. Not verified against the manufacturer's documentation
- Solarx Power Hybrid X1 Hybrid X3 / X1AC.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 1 | int16 | R | V | |||
| HR | 2 | int16 | R | W | |||
| HR | 3 | uint16 | R | V | |||
| HR | 4 | uint16 | R | V | |||
| HR | 5 | uint16 | R | A | |||
| HR | 6 | uint16 | R | A | |||
| HR | 7 | uint16 | R | Hz | |||
| HR | 8 | int16 | R | ||||
| HR | 9 | uint16 | R | ||||
| HR | 10 | uint16 | R | W | |||
| HR | 11 | uint16 | R | W | |||
| HR | 12 | int16 | R | ||||
| HR | 13 | uint16 | R | V | |||
| HR | 14 | uint16 | R | V | |||
| HR | 15 | uint16 | R | mA | |||
| HR | 16 | uint16 | R | V | |||
| HR | 17 | uint16 | R | Hz | |||
| HR | 18 | uint16 | R | mA | |||
| HR | 19 | uint16 | R | ms | |||
| HR | 20 | int16 | R | V | |||
| HR | 21 | int16 | R | A | |||
| HR | 22 | int16 | R | W | |||
| HR | 23 | uint16 | R | ||||
| HR | 24 | int16 | R | ||||
| HR | 28 | uint16 | R | % | |||
| HR | 29 | uint16 | R | kWh | |||
| HR | 30 | uint16 | R | kWh | |||
| HR | 31 | uint16 | R | ||||
| HR | 32 | uint16 | R | kWh | |||
| HR | 33 | uint16 | R | kWh | |||
| HR | 34 | uint16 | R | kWh | |||
| HR | 35 | uint16 | R | kWh | |||
| HR | 36 | uint16 | R | A | |||
| HR | 37 | uint16 | R | A | |||
| HR | 38 | uint16 | R | ||||
| HR | 64 | uint16 | R | ||||
| HR | 65 | uint16 | R | ||||
| HR | 67 | uint16 | R | ||||
| HR | 70 | int32 ABCD | R | w | |||
| HR | 72 | uint32 ABCD | R | kWh | |||
| HR | 74 | uint32 ABCD | R | kWh | |||
| HR | 76 | uint16 | R | V | |||
| HR | 77 | uint16 | R | A | |||
| HR | 78 | uint16 | R | VA | |||
| HR | 79 | uint16 | R | Hz | |||
| HR | 80 | uint16 | R | kWh | |||
| HR | 82 | uint32 ABCD | R | kWh | |||
| HR | 84 | uint16 | R | ||||
| HR | 102 | uint16 | R | V | |||
| HR | 103 | uint16 | R | V |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).