Tense TPM-04SH Modbus register map
3-phase power-quality analyser (TPM-04 family) — V/I/P/Q/S with min/max/avg/demand, 64-bit energy, per-harmonic THD (3rd–31st), relay control.
- Unofficial
- 280 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 280 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/tense/tpm-04sh.mbmap.json · 37 KB · history
- SHA-256
- 7f0e0db503f2da0da2afc25dd49aff42f3b455925ab485b7323b5dc33ccd2c37
- Manufacturer
- tense.com.tr
Sources and notes
Source: Omni Console device library (OmniCoreST), modbus-library/tense-tpm-04sh.toml; Source: "Modbus Register TPM-04 SH SH-DL.pdf" (Basic Data Modbus Address).. Not verified against the manufacturer's documentation
- Tense TPM-04SH.
- Converted automatically from the Omni Console device library (OmniCoreST).
- Not verified against the manufacturer's documentation.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
- | Tense TPM-04SH Energy Analyser — Modbus register map for Omni Console
- |
- | Source: "Modbus Register TPM-04 SH SH-DL.pdf" (Basic Data Modbus Address).
- | Shared map for the Tense TPM-04 / TPM-04SH / TPM-01ES / TPM-01ESH family.
- | - Holding registers (FC03). Addresses are the raw register addresses in
- | decimal: 4000 = 0x0FA0 … 4419 = 0x1143 (manual's Dec and Hex are equal).
- | `area` defaults to "holding"; `word_order` defaults to "be" (manual lists
- | wide values most-significant word first: H/L and H3/H2/H1/L). Both omitted.
- | - "RESERVED read as 0" rows from the manual are intentionally not mapped.
- | - `scale` bakes in the device's fixed multiplier only.
- |
- | CT/VT CAVEAT applies ONLY to the 16-bit voltage and current registers:
- | voltage(16-bit) = raw × VT × 0.1 current(16-bit) = raw × CT × 0.001
- | This map assumes a DIRECT connection (CT = 1, VT = 1). With external
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 4000 | uint16 | R | V | ×0.1 | ||
| HR | 4001 | uint16 | R | V | ×0.1 | ||
| HR | 4002 | uint16 | R | V | ×0.1 | ||
| HR | 4003 | uint16 | R | V | ×0.1 | ||
| HR | 4004 | uint16 | R | V | ×0.1 | ||
| HR | 4005 | uint16 | R | V | ×0.1 | ||
| HR | 4006 | uint16 | R | V | ×0.1 | ||
| HR | 4007 | uint16 | R | V | ×0.1 | ||
| HR | 4008 | uint16 | R | V | ×0.1 | ||
| HR | 4009 | uint16 | R | V | ×0.1 | ||
| HR | 4010 | uint16 | R | V | ×0.1 | ||
| HR | 4011 | uint16 | R | V | ×0.1 | ||
| HR | 4012 | uint16 | R | V | ×0.1 | ||
| HR | 4013 | uint16 | R | V | ×0.1 | ||
| HR | 4014 | uint16 | R | V | ×0.1 | ||
| HR | 4015 | uint16 | R | V | ×0.1 | ||
| HR | 4016 | uint16 | R | V | ×0.1 | ||
| HR | 4017 | uint16 | R | V | ×0.1 | ||
| HR | 4018 | uint16 | R | V | ×0.1 | ||
| HR | 4019 | uint16 | R | V | ×0.1 | ||
| HR | 4020 | uint16 | R | V | ×0.1 | ||
| HR | 4021 | uint16 | R | V | ×0.1 | ||
| HR | 4022 | uint16 | R | V | ×0.1 | ||
| HR | 4023 | uint16 | R | V | ×0.1 | ||
| HR | 4024 | uint16 | R | A | ×0.001 | ||
| HR | 4025 | uint16 | R | A | ×0.001 | ||
| HR | 4026 | uint16 | R | A | ×0.001 | ||
| HR | 4027 | uint16 | R | A | ×0.001 | ||
| HR | 4028 | uint16 | R | A | ×0.001 | ||
| HR | 4029 | uint16 | R | A | ×0.001 | ||
| HR | 4030 | uint16 | R | A | ×0.001 | ||
| HR | 4031 | uint16 | R | A | ×0.001 | ||
| HR | 4032 | uint16 | R | A | ×0.001 | ||
| HR | 4033 | uint16 | R | A | ×0.001 | ||
| HR | 4034 | uint16 | R | A | ×0.001 | ||
| HR | 4035 | uint16 | R | A | ×0.001 | ||
| HR | 4040 | uint16 | R | Hz | ×0.01 | ||
| HR | 4041 | uint16 | R | Hz | ×0.01 | ||
| HR | 4042 | uint16 | R | Hz | ×0.01 | ||
| HR | 4043 | int16 | R | ×0.001 | |||
| HR | 4044 | int16 | R | ×0.001 | |||
| HR | 4045 | int16 | R | ×0.001 | |||
| HR | 4046 | int16 | R | ×0.001 | |||
| HR | 4047 | int16 | R | ×0.001 | |||
| HR | 4048 | int16 | R | ×0.001 | |||
| HR | 4049 | int16 | R | ×0.001 | |||
| HR | 4050 | uint16 | R | % | ×0.001 | ||
| HR | 4051 | uint16 | R | % | ×0.001 | ||
| HR | 4052 | uint16 | R | ||||
| HR | 4053 | uint16 | R | ×0.1 | |||
| HR | 4054 | uint16 | R | ||||
| HR | 4055 | uint16 | R | ||||
| HR | 4056 | uint16 | R | ||||
| HR | 4057 | uint16 | R | ||||
| HR | 4058 | uint16 | R | ||||
| HR | 4059 | uint16 | R | ||||
| HR | 4060 | uint16 | R | ||||
| HR | 4061 | uint16 | R | ×0.01 | |||
| HR | 4062 | uint16 | R | ×0.001 | |||
| HR | 4063 | uint16 | R | ×0.0001 | |||
| HR | 4064 | uint16 | R | ×0.001 | |||
| HR | 4065 | uint16 | R | ||||
| HR | 4066 | uint16 | R | ||||
| HR | 4067 | uint16 | R | ||||
| HR | 4068 | uint16 | R | ×0.001 | |||
| HR | 4070 | uint16 | R | ||||
| HR | 4071 | uint16 | R | ||||
| HR | 4072 | uint16 | R | ||||
| HR | 4073 | uint16 | R | ×0.1 | |||
| HR | 4074 | uint16 | R | ||||
| HR | 4075 | uint16 | R | ||||
| HR | 4076 | uint16 | R | ||||
| HR | 4077 | uint16 | R | ×0.001 | |||
| HR | 4078 | uint16 | R | ||||
| HR | 4079 | uint16 | R | ||||
| HR | 4080 | uint16 | R | ||||
| HR | 4081 | uint16 | R | ×0.001 | |||
| HR | 4082 | uint16 | R | ||||
| HR | 4083 | uint16 | R | ||||
| HR | 4084 | uint16 | R | ||||
| HR | 4085 | uint16 | R | ×0.01 | |||
| HR | 4086 | uint16 | R | ||||
| HR | 4087 | uint16 | R | ||||
| HR | 4088 | uint16 | R | ||||
| HR | 4089 | uint16 | R | ×0.01 | |||
| HR | 4090 | uint16 | R | ||||
| HR | 4091 | uint16 | R | ||||
| HR | 4092 | uint16 | R | ||||
| HR | 4093 | uint16 | R | ×0.001 | |||
| HR | 4094 | uint16 | R | ||||
| HR | 4095 | uint16 | R | ||||
| HR | 4096 | uint16 | R | ||||
| HR | 4097 | uint16 | R | ×0.01 | |||
| HR | 4098 | uint16 | R | ||||
| HR | 4099 | uint16 | R | ||||
| HR | 4100 | uint16 | R | ||||
| HR | 4101 | uint16 | R | ×0.01 | |||
| HR | 4102 | uint16 | R | ||||
| HR | 4103 | uint16 | R | ||||
| HR | 4104 | uint16 | R |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).