{ "$schema": "https://raw.githubusercontent.com/nobrega8/mbmap-library/main/schema/mbmap-2.schema.json", "mbmap": 2, "vendor": "Schneider Electric", "model": "Altivar 600", "models": ["Altivar 600"], "vendor_website": "se.com", "description": "Altivar 600 variable speed drive: every parameter, by its Modbus (logic) address", "revision": 2, "revised": "2026-10-18", "source": "Schneider Electric, Altivar 600 communication parameters (EAV64332 V4.6)", "sources": [ { "title": "Altivar 600 - Communication parameters", "version": "EAV64332 V4.6", "url": "https://www.se.com/ww/en/download/document/EAV64332/", "note": "Parameters and Enumerations sheets" } ], "notes": [ "The address of each parameter is its logic address, which is also its Modbus register address.", "Each name ends with the parameter code used in the drive menus and manuals.", "Parameters marked 'writable only when the motor is stopped' are refused while the drive runs.", "Many enumerations are shared lists in the source file; only the parameter-specific ones are included here." ], "protocol": "tcp+rtu", "unit_id": 1, "baudrate": 19200, "parity": "E", "byte_order": "big", "word_order": "big", "address_base": 0, "x_status": "official", "registers": [ {"name": "Access level (LAC)", "group": "Configuration and settings", "area": "holding", "address": 3006, "type": "uint16", "access": "RW", "enum": {"0": "Basic access", "1": "Standard access", "3": "Expert access", "4": "Services"}, "description": "Factory setting [Standard access] STD"}, {"name": "Dual rating state (DRT)", "group": "Configuration and settings", "area": "holding", "address": 3010, "type": "uint16", "access": "RW", "enum": {"0": "Normal duty", "1": "High duty"}, "description": "Writable only when the motor is stopped; Factory setting [Normal duty] NORMAL"}, {"name": "Drive nominal rating (NCV)", "group": "Identification parameters", "area": "holding", "address": 3011, "type": "uint16", "enum": {"0": "Unknown rating", "1": "0.10kW - 0.2HP", "2": "0.18 kW / 0.25 Hp", "3": "0.25kW - 0.37HP", "4": "0.37 kW / 0.5 Hp", "5": "0.55 kW / 0.75 Hp", "6": "0.75 kW / 1 Hp", "7": "5.5kW - 7.5HP", "8": "1.1 kW / 1.5 Hp", "9": "1.5 kW / 2 Hp", "10": "1.85kW - 3HP", "11": "2.2 kW / 3 Hp", "12": "3 kW / 4HP", "13": "3.7kW - 5HP", "14": "4kW - 5HP", "15": "5.5 kW / 7.5 Hp", "16": "7.5 kW / 10 Hp", "17": "9kW - 11HP", "18": "11 kW / 15 HP", "19": "15 kW / 20 HP", "20": "18.5kW - 25HP", "21": "22kW - 30HP", "22": "30kW - 40HP", "23": "37kW - 50HP", "24": "45kW - 60HP", "25": "55kW - 75HP", "26": "75kW - 100HP", "27": "90kW - 125HP", "28": "110kW - 150HP", "29": "132kW - 200HP", "30": "160kW - 250HP", "31": "200kW - 300HP", "32": "220kW - 350HP", "33": "250kW - 400HP", "34": "280kW - 450HP", "35": "315kW - 500HP", "36": "355kW - 450HP", "37": "400kW - 600HP", "38": "450kW - 750HP", "39": "500kW - 800HP", "40": "560kW - 850HP", "41": "630kW -900HP", "42": "710kW -950HP", "43": "800kW - 1000HP", "44": "900kW - 900HP", "45": "1000kW - 1000HP", "46": "1100kW - 1100HP", "47": "1200kW - 1200HP", "48": "1300kW - 1300HP", "49": "1400kW - 1400HP", "50": "1500kW - 1500HP", "51": "1600kW - 1600HP", "52": "1700kW - 1700HP", "53": "1800kW - 1800HP", "54": "1900kW - 1900HP", "55": "2000kW - 2000HP", "56": "2100kW - 2100HP", "57": "2200kW - 2200HP", "58": "2300kW - 2300HP", "59": "2400kW - 2400HP", "60": "2500 kW / 3333 Hp", "61": "2600 kW / 3467 Hp"}, "description": "Factory setting [Unknown rating] NO"}, {"name": "Drive mains voltage (VCAL)", "group": "Identification parameters", "area": "holding", "address": 3012, "type": "uint16", "enum": {"0": "Unkown voltage", "1": "100-120 V single phase", "2": "100-120 V three phase", "3": "200-240 V single", "4": "200-240 V three phase", "5": "380-500 V single phase", "6": "380-500 V three phase", "7": "500-690 V single phase", "8": "500-690 V three phase", "9": "600 V single phase", "10": "600 V three phase"}, "description": "Factory setting [Unkown voltage] NO"}, {"name": "Motor Standard (BFR)", "group": "Configuration and settings", "area": "holding", "address": 3015, "type": "uint16", "access": "RW", "enum": {"0": "50Hz motor frequency", "1": "60Hz motor frequency"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Nominal Drive current (INV)", "group": "Identification parameters", "area": "holding", "address": 3017, "type": "uint16", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting Refer to programming manual"}, {"name": "Factory setting group (FRY)", "group": "Configuration management", "area": "holding", "address": 3022, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting BIT1"}, {"name": "Switching frequency type (SFT)", "group": "Configuration and settings", "area": "holding", "address": 3101, "type": "uint16", "access": "RW", "enum": {"1": "Switch.frequency type 1", "2": "Switch.frequency type 2"}, "description": "Writable only when the motor is stopped; Factory setting [Switch.frequency type 1] HF1"}, {"name": "Switching frequency (SFR)", "group": "Configuration and settings", "area": "holding", "address": 3102, "type": "uint16", "scale": 0.1, "unit": "kHz", "access": "RW", "description": "Range 1.0 kHz ... 16.0 kHz; Factory setting Refer to programming manual"}, {"name": "Max frequency (TFR)", "group": "Configuration and settings", "area": "holding", "address": 3103, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 10.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "High speed (HSP)", "group": "Configuration and settings", "area": "holding", "address": 3104, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Low speed (LSP)", "group": "Configuration and settings", "area": "holding", "address": 3105, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Reference frequency template selection (BSP)", "group": "Configuration and settings", "area": "holding", "address": 3106, "type": "uint16", "access": "RW", "enum": {"0": "Standard ref template", "1": "Pedestal at LSP", "2": "Deadband at LSP", "4": "Deadband at 0 speed", "5": "Standard ref template with 0% at init", "6": "Pedestal at LSP with 0% at init"}, "description": "Factory setting [Standard ref template with 0% at init] BSD0"}, {"name": "Motor Noise Reduction (NRD)", "group": "Configuration and settings", "area": "holding", "address": 3107, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Reverse direction disable (RIN)", "group": "Configuration and settings", "area": "holding", "address": 3108, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "Yes", "2": "Absolute"}, "description": "Writable only when the motor is stopped; Factory setting [Yes] YES"}, {"name": "Sinus filter activation (OFI)", "group": "Configuration and settings", "area": "holding", "address": 3109, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "Yes", "2": "Optimized"}, "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Catch on fly (FLR)", "group": "Configuration and settings", "area": "holding", "address": 3110, "type": "uint16", "access": "RW", "enum": {"0": "Not configured", "1": "Yes on freewheel", "2": "Yes always"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Catch on fly sensitivity (VCB)", "group": "Configuration and settings", "area": "holding", "address": 3111, "type": "uint16", "scale": 0.01, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.10 V ... 100.00 V; Factory setting 0.20 V"}, {"name": "Output short circuit test (STRT)", "group": "Configuration and settings", "area": "holding", "address": 3112, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Catch on fly mode (COFM)", "group": "Configuration and settings", "area": "holding", "address": 3113, "type": "uint16", "access": "RW", "enum": {"0": "Measured", "1": "Computed"}, "description": "Writable only when the motor is stopped; Factory setting [Measured] HWCOF"}, {"name": "Counter reset (RPR)", "group": "Control parameters", "area": "holding", "address": 3120, "type": "uint16", "access": "RW", "enum": {"0": "No", "2": "Reset run time", "3": "Reset total run time", "4": "Reset power ON time", "7": "Reset fan counter", "8": "Reset total power ON time", "9": "Clear GTHI", "10": "Clear LTHI", "11": "Reset start counter", "12": "Reset total start counter", "13": "Clear AFE fan operation time", "14": "Clear cabinet fan operation time", "20": "Efficiency MAX", "21": "Efficiency MIN", "22": "Flow rate MAX", "23": "Flow rate MIN", "24": "Reset total quantity", "30": "Clear BRTH", "31": "Clear BRTI", "32": "Clear AFE power ON time", "33": "Clear BPTI", "34": "Clear AFE brick number of start", "35": "Clear BNSI", "36": "Clear AFE regen time", "37": "Clear BGTI", "38": "Clear BLMI", "39": "Clear BLGI", "64": "Reset all counters including service"}, "description": "Factory setting [No] NO"}, {"name": "Fan mode (FFM)", "group": "Configuration and settings", "area": "holding", "address": 3130, "type": "uint16", "access": "RW", "enum": {"0": "Standard", "1": "Always", "2": "Never", "3": "Economy"}, "description": "Factory setting [Standard] STD"}, {"name": "Status Register (ETA)", "group": "Status parameters", "area": "holding", "address": 3201, "type": "uint16"}, {"name": "Motor frequency (RFR)", "group": "Actual values parameters", "area": "holding", "address": 3202, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Reference frequency before ramp (FRH)", "group": "Reference parameters", "area": "holding", "address": 3203, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -500.0 Hz ... 500.0 Hz"}, {"name": "Motor current (LCR)", "group": "Actual values parameters", "area": "holding", "address": 3204, "type": "uint16", "description": "Unit: Refer to programming manual; Range 0 ... 65535"}, {"name": "Motor torque (OTR)", "group": "Actual values parameters", "area": "holding", "address": 3205, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Internal State register (ETI)", "group": "Status parameters", "area": "holding", "address": 3206, "type": "uint16"}, {"name": "Mains voltage (ULN)", "group": "Measurement parameters", "area": "holding", "address": 3207, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "Motor voltage (UOP)", "group": "Actual values parameters", "area": "holding", "address": 3208, "type": "uint16", "unit": "V", "description": "Range 0 V ... 65535 V"}, {"name": "Drive thermal state (THD)", "group": "Measurement parameters", "area": "holding", "address": 3209, "type": "uint16", "unit": "%", "description": "Range 0 % ... 200 %"}, {"name": "Motor power in % (OPR)", "group": "Actual values parameters", "area": "holding", "address": 3211, "type": "int16", "unit": "%", "description": "Range -32767 % ... 32767 %"}, {"name": "Active Electrical input power estimation (100% = drive power) (IPR)", "group": "Actual values parameters", "area": "holding", "address": 3218, "type": "int16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "FRH high resolution (FRHT)", "group": "Configuration and settings", "area": "holding", "address": 3222, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "LCR without filter (SLCR)", "group": "Configuration and settings", "area": "holding", "address": 3224, "type": "uint16", "description": "Unit: Refer to programming manual; Range 0 ... 65535"}, {"name": "RFR without filter (SRFR)", "group": "Configuration and settings", "area": "holding", "address": 3225, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Motor torque (% of Cn motor in Q12) without filter (SOTR)", "group": "Configuration and settings", "area": "holding", "address": 3226, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "ULN without filter (SULN)", "group": "Configuration and settings", "area": "holding", "address": 3229, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "Device state (HMIS)", "group": "Status parameters", "area": "holding", "address": 3240, "type": "uint16", "enum": {"0": "Drive automatic tuning", "1": "DC injection", "2": "Ready", "3": "Freewheel stop", "4": "Running", "5": "Accelerating", "6": "Decelerating", "7": "In current limitation", "8": "Fast stop", "11": "No mains voltage", "13": "Control stopping", "14": "Dec ramp adaptation", "15": "Output cut", "17": "Undervoltage warning", "18": "TC mode active", "19": "In autotest", "20": "Autotest error", "21": "Autotest OK", "22": "EEprom test", "23": "Operating state \"Fault\"", "25": "DCP Flashing mode", "30": "STO active", "35": "Energy Saving", "36": "Firmware Update", "37": "AFE Mains undervoltage"}}, {"name": "DC bus voltage (VBUS)", "group": "Measurement parameters", "area": "holding", "address": 3243, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "Motor run time (RTH)", "group": "Measurement parameters", "area": "holding", "address": 3244, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s"}, {"name": "Power-on time (PTH)", "group": "Measurement parameters", "area": "holding", "address": 3246, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s"}, {"name": "Number of motor starts (NSM)", "group": "Configuration and settings", "area": "holding", "address": 3260, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 ... 4294967295"}, {"name": "Fan speed (FSPD)", "group": "Measurement parameters", "area": "holding", "address": 3263, "type": "uint16", "unit": "rpm", "description": "Range 0 rpm ... 65535 rpm"}, {"name": "Fan operation time (FPBT)", "group": "Actual values parameters", "area": "holding", "address": 3264, "type": "uint32", "unit": "h", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 h ... 500000 h"}, {"name": "Motor torque in Nm (OTQN)", "group": "Actual values parameters", "area": "holding", "address": 3268, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Torque filter time (TPFV)", "group": "Configuration and settings", "area": "holding", "address": 3269, "type": "uint16", "unit": "ms", "access": "RW", "description": "Range 0 ms ... 10000 ms; Factory setting 0 ms"}, {"name": "Motor run time (RTHH)", "group": "Configuration and settings", "area": "holding", "address": 3274, "type": "uint32", "scale": 0.1, "unit": "h", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0.0 h ... 119304.6 h"}, {"name": "Power-on time (PTHH)", "group": "Configuration and settings", "area": "holding", "address": 3276, "type": "uint32", "scale": 0.1, "unit": "h", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0.0 h ... 119304.6 h"}, {"name": "OPR without filter (SOPR)", "group": "Configuration and settings", "area": "holding", "address": 3290, "type": "int16", "unit": "%", "description": "Range -32767 % ... 32767 %"}, {"name": "Motor mechanical power estimation (OPRW)", "group": "Actual values parameters", "area": "holding", "address": 3292, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Active Electrical output power in kW (EPRW)", "group": "Actual values parameters", "area": "holding", "address": 3293, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Instantaneous active input power (IPRW)", "group": "Actual values parameters", "area": "holding", "address": 3294, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Active Electrical output power in % (EPR)", "group": "Actual values parameters", "area": "holding", "address": 3297, "type": "int16", "unit": "%", "description": "Range -300 % ... 300 %"}, {"name": "Input reactive power (IQRW)", "group": "Actual values parameters", "area": "holding", "address": 3298, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Device software version (VDP)", "group": "Identification parameters", "area": "holding", "address": 3302, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Device name (char 1 and 2) (PAN0)", "group": "Identification parameters", "area": "holding", "address": 3340, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Device name (char 3 and 4) (PAN1)", "group": "Identification parameters", "area": "holding", "address": 3341, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Device name (char 5 and 6) (PAN2)", "group": "Identification parameters", "area": "holding", "address": 3342, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Device name (char 7 and 8) (PAN3)", "group": "Identification parameters", "area": "holding", "address": 3343, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Device name (char 9 and 10) (PAN4)", "group": "Identification parameters", "area": "holding", "address": 3344, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Device name (char 11 and 12) (PAN5)", "group": "Identification parameters", "area": "holding", "address": 3345, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Device name (char 13 and 14) (PAN6)", "group": "Identification parameters", "area": "holding", "address": 3346, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Device name (char 15 and 16) (PAN7)", "group": "Identification parameters", "area": "holding", "address": 3347, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "DI1 delay (L1D)", "group": "Configuration and settings", "area": "holding", "address": 4001, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI2 delay (L2D)", "group": "Configuration and settings", "area": "holding", "address": 4002, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI3 delay (L3D)", "group": "Configuration and settings", "area": "holding", "address": 4003, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI4 delay (L4D)", "group": "Configuration and settings", "area": "holding", "address": 4004, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI5 delay (L5D)", "group": "Configuration and settings", "area": "holding", "address": 4005, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI6 delay (L6D)", "group": "Configuration and settings", "area": "holding", "address": 4006, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI11 delay (L11D)", "group": "Configuration and settings", "area": "holding", "address": 4011, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI12 delay (L12D)", "group": "Configuration and settings", "area": "holding", "address": 4012, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI13 delay (L13D)", "group": "Configuration and settings", "area": "holding", "address": 4013, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI14 delay (L14D)", "group": "Configuration and settings", "area": "holding", "address": 4014, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI15 delay (L15D)", "group": "Configuration and settings", "area": "holding", "address": 4015, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI16 delay (L16D)", "group": "Configuration and settings", "area": "holding", "address": 4016, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI50 delay (D50D)", "group": "Configuration and settings", "area": "holding", "address": 4040, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI51 delay (D51D)", "group": "Configuration and settings", "area": "holding", "address": 4041, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI52 delay (D52D)", "group": "Configuration and settings", "area": "holding", "address": 4042, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI53 delay (D53D)", "group": "Configuration and settings", "area": "holding", "address": 4043, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI54 delay (D54D)", "group": "Configuration and settings", "area": "holding", "address": 4044, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI55 delay (D55D)", "group": "Configuration and settings", "area": "holding", "address": 4045, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI56 delay (D56D)", "group": "Configuration and settings", "area": "holding", "address": 4046, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI57 delay (D57D)", "group": "Configuration and settings", "area": "holding", "address": 4047, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI58 delay (D58D)", "group": "Configuration and settings", "area": "holding", "address": 4048, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "DI59 delay (D59D)", "group": "Configuration and settings", "area": "holding", "address": 4049, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 200 ms; Factory setting 5 ms"}, {"name": "R1 active level (R1S)", "group": "Configuration and settings", "area": "holding", "address": 4201, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R2 active level (R2S)", "group": "Configuration and settings", "area": "holding", "address": 4202, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R3 active level (R3S)", "group": "Configuration and settings", "area": "holding", "address": 4203, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R4 active level (R4S)", "group": "Configuration and settings", "area": "holding", "address": 4204, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R5 active level (R5S)", "group": "Configuration and settings", "area": "holding", "address": 4205, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R6 active level (R6S)", "group": "Configuration and settings", "area": "holding", "address": 4206, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R1 holding time (R1H)", "group": "Configuration and settings", "area": "holding", "address": 4221, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R2 holding time (R2H)", "group": "Configuration and settings", "area": "holding", "address": 4222, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R3 holding time (R3H)", "group": "Configuration and settings", "area": "holding", "address": 4223, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R4 holding time (R4H)", "group": "Configuration and settings", "area": "holding", "address": 4224, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R5 holding time (R5H)", "group": "Configuration and settings", "area": "holding", "address": 4225, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R6 holding delay time (R6H)", "group": "Configuration and settings", "area": "holding", "address": 4226, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R1 delay time (R1D)", "group": "Configuration and settings", "area": "holding", "address": 4241, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R2 delay time (R2D)", "group": "Configuration and settings", "area": "holding", "address": 4242, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R3 delay time (R3D)", "group": "Configuration and settings", "area": "holding", "address": 4243, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R4 delay time (R4D)", "group": "Configuration and settings", "area": "holding", "address": 4244, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R5 delay time (R5D)", "group": "Configuration and settings", "area": "holding", "address": 4245, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R6 activation delay time (R6D)", "group": "Configuration and settings", "area": "holding", "address": 4246, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "DQ11 status (output active level) (D11S)", "group": "Configuration and settings", "area": "holding", "address": 4263, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "DQ12 status (output active level) (D12S)", "group": "Configuration and settings", "area": "holding", "address": 4264, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "DQ11 holding delay (D11H)", "group": "Configuration and settings", "area": "holding", "address": 4273, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "DQ12 holding delay (D12H)", "group": "Configuration and settings", "area": "holding", "address": 4274, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "DQ11 activation delay (D11D)", "group": "Configuration and settings", "area": "holding", "address": 4283, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "DQ12 activation delay (D12D)", "group": "Configuration and settings", "area": "holding", "address": 4284, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "Enable relay 1 fallback (R1F)", "group": "Configuration and settings", "area": "holding", "address": 4290, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Enable relay 2 fallback (R2F)", "group": "Configuration and settings", "area": "holding", "address": 4291, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Enable AQ1 fallback (AOF1)", "group": "Configuration and settings", "area": "holding", "address": 4293, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "R60 active at (R60S)", "group": "Configuration and settings", "area": "holding", "address": 4300, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R60 delay time (R60D)", "group": "Configuration and settings", "area": "holding", "address": 4301, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R60 holding time (R60H)", "group": "Configuration and settings", "area": "holding", "address": 4302, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 9999 ms; Factory setting 0 ms"}, {"name": "R61 active at (R61S)", "group": "Configuration and settings", "area": "holding", "address": 4303, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R61 delay time (R61D)", "group": "Configuration and settings", "area": "holding", "address": 4304, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R61 holding time (R61H)", "group": "Configuration and settings", "area": "holding", "address": 4305, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 9999 ms; Factory setting 0 ms"}, {"name": "R62 active at (R62S)", "group": "Configuration and settings", "area": "holding", "address": 4306, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R62 delay time (R62D)", "group": "Configuration and settings", "area": "holding", "address": 4307, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R62 holding time (R62H)", "group": "Configuration and settings", "area": "holding", "address": 4308, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 9999 ms; Factory setting 0 ms"}, {"name": "R63 active at (R63S)", "group": "Configuration and settings", "area": "holding", "address": 4309, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R63 delay time (R63D)", "group": "Configuration and settings", "area": "holding", "address": 4310, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R63 holding time (R63H)", "group": "Configuration and settings", "area": "holding", "address": 4311, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 9999 ms; Factory setting 0 ms"}, {"name": "R64 active at (R64S)", "group": "Configuration and settings", "area": "holding", "address": 4312, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R64 delay time (R64D)", "group": "Configuration and settings", "area": "holding", "address": 4313, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R64 holding time (R64H)", "group": "Configuration and settings", "area": "holding", "address": 4314, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 9999 ms; Factory setting 0 ms"}, {"name": "R65 active at (R65S)", "group": "Configuration and settings", "area": "holding", "address": 4315, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R65 delay time (R65D)", "group": "Configuration and settings", "area": "holding", "address": 4316, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R65 holding time (R65H)", "group": "Configuration and settings", "area": "holding", "address": 4317, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 9999 ms; Factory setting 0 ms"}, {"name": "R66 active at (R66S)", "group": "Configuration and settings", "area": "holding", "address": 4318, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [High level] POS"}, {"name": "R66 delay time (R66D)", "group": "Configuration and settings", "area": "holding", "address": 4319, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 60000 ms; Factory setting 0 ms"}, {"name": "R66 holding time (R66H)", "group": "Configuration and settings", "area": "holding", "address": 4320, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 9999 ms; Factory setting 0 ms"}, {"name": "Configuration of AI1 (AI1T)", "group": "Configuration and settings", "area": "holding", "address": 4402, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Voltage] 10U"}, {"name": "Configuration of AI2 (AI2T)", "group": "Configuration and settings", "area": "holding", "address": 4403, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Voltage] 10U"}, {"name": "Configuration of AI3 (AI3T)", "group": "Configuration and settings", "area": "holding", "address": 4404, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Current] 0A"}, {"name": "Configuration of AI4 (AI4T)", "group": "Configuration and settings", "area": "holding", "address": 4405, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Current] 0A"}, {"name": "Configuration of AI5 (AI5T)", "group": "Configuration and settings", "area": "holding", "address": 4406, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Current] 0A"}, {"name": "AI1 voltage scaling parameter of 0% (UIL1)", "group": "Configuration and settings", "area": "holding", "address": 4412, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 0.0 V"}, {"name": "AI2 voltage scaling parameter of 0% (UIL2)", "group": "Configuration and settings", "area": "holding", "address": 4413, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 0.0 V"}, {"name": "AI3 voltage scaling parameter of 0% (UIL3)", "group": "Configuration and settings", "area": "holding", "address": 4414, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 0.0 V"}, {"name": "AI4 voltage scaling parameter of 0% (UIL4)", "group": "Configuration and settings", "area": "holding", "address": 4415, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 0.0 V"}, {"name": "AI5 voltage scaling parameter of 0% (UIL5)", "group": "Configuration and settings", "area": "holding", "address": 4416, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 0.0 V"}, {"name": "AI1 voltage scaling parameter of 100% (UIH1)", "group": "Configuration and settings", "area": "holding", "address": 4422, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 10.0 V"}, {"name": "AI2 voltage scaling parameter of 100% (UIH2)", "group": "Configuration and settings", "area": "holding", "address": 4423, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 10.0 V"}, {"name": "AI3 voltage scaling parameter of 100% (UIH3)", "group": "Configuration and settings", "area": "holding", "address": 4424, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 10.0 V"}, {"name": "AI4 voltage scaling parameter of 100% (UIH4)", "group": "Configuration and settings", "area": "holding", "address": 4425, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 10.0 V"}, {"name": "AI5 voltage scaling parameter of 100% (UIH5)", "group": "Configuration and settings", "area": "holding", "address": 4426, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 10.0 V"}, {"name": "AI1 current scaling parameter of 0% (CRL1)", "group": "Configuration and settings", "area": "holding", "address": 4432, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 0.0 mA"}, {"name": "AI2 current scaling parameter of 0% (CRL2)", "group": "Configuration and settings", "area": "holding", "address": 4433, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 0.0 mA"}, {"name": "AI3 current scaling parameter of 0% (CRL3)", "group": "Configuration and settings", "area": "holding", "address": 4434, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 0.0 mA"}, {"name": "AI4 current scaling parameter of 0% (CRL4)", "group": "Configuration and settings", "area": "holding", "address": 4435, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 0.0 mA"}, {"name": "AI5 current scaling parameter of 0% (CRL5)", "group": "Configuration and settings", "area": "holding", "address": 4436, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 0.0 mA"}, {"name": "AI1 current scaling parameter of 100% (CRH1)", "group": "Configuration and settings", "area": "holding", "address": 4442, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 20.0 mA"}, {"name": "AI2 current scaling parameter of 100% (CRH2)", "group": "Configuration and settings", "area": "holding", "address": 4443, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 20.0 mA"}, {"name": "AI3 current scaling parameter of 100% (CRH3)", "group": "Configuration and settings", "area": "holding", "address": 4444, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 20.0 mA"}, {"name": "AI4 current scaling parameter of 100% (CRH4)", "group": "Configuration and settings", "area": "holding", "address": 4445, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 20.0 mA"}, {"name": "AI5 current scaling parameter of 100% (CRH5)", "group": "Configuration and settings", "area": "holding", "address": 4446, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 20.0 mA"}, {"name": "AI1 filter (AI1F)", "group": "Configuration and settings", "area": "holding", "address": 4452, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.00 s ... 10.00 s; Factory setting 0.00 s"}, {"name": "AI2 filter (AI2F)", "group": "Configuration and settings", "area": "holding", "address": 4453, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.00 s ... 10.00 s; Factory setting 0.00 s"}, {"name": "AI3 filter (AI3F)", "group": "Configuration and settings", "area": "holding", "address": 4454, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.00 s ... 10.00 s; Factory setting 0.00 s"}, {"name": "AI4 filter (AI4F)", "group": "Configuration and settings", "area": "holding", "address": 4455, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.00 s ... 10.00 s; Factory setting 0.00 s"}, {"name": "AI5 filter (AI5F)", "group": "Configuration and settings", "area": "holding", "address": 4456, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.00 s ... 10.00 s; Factory setting 0.00 s"}, {"name": "AI1 intermediate point X (AI1E)", "group": "Configuration and settings", "area": "holding", "address": 4462, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 0 %"}, {"name": "AI2 intermediate point X (AI2E)", "group": "Configuration and settings", "area": "holding", "address": 4463, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 0 %"}, {"name": "AI3 intermediate point X (AI3E)", "group": "Configuration and settings", "area": "holding", "address": 4464, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 0 %"}, {"name": "AI4 intermediate point X (AI4E)", "group": "Configuration and settings", "area": "holding", "address": 4465, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 0 %"}, {"name": "AI5 intermediate point X (AI5E)", "group": "Configuration and settings", "area": "holding", "address": 4466, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 0 %"}, {"name": "AI1 intermediate point Y (AI1S)", "group": "Configuration and settings", "area": "holding", "address": 4472, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 0 %"}, {"name": "AI2 intermediate point Y (AI2S)", "group": "Configuration and settings", "area": "holding", "address": 4473, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 0 %"}, {"name": "AI3 intermediate point Y (AI3S)", "group": "Configuration and settings", "area": "holding", "address": 4474, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 0 %"}, {"name": "AI4 intermediate point Y (AI4S)", "group": "Configuration and settings", "area": "holding", "address": 4475, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 0 %"}, {"name": "AI5 delinearization output level (AI5S)", "group": "Configuration and settings", "area": "holding", "address": 4476, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 0 %"}, {"name": "Analog input 1 range (AI1L)", "group": "Configuration and settings", "area": "holding", "address": 4482, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Positive only] POS"}, {"name": "Analog input 2 range (AI2L)", "group": "Configuration and settings", "area": "holding", "address": 4483, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Positive only] POS"}, {"name": "Analog input 3 range (AI3L)", "group": "Configuration and settings", "area": "holding", "address": 4484, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Positive only] POS"}, {"name": "Analog input 4 range (AI4L)", "group": "Configuration and settings", "area": "holding", "address": 4485, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Positive only] POS"}, {"name": "Analog input 5 range (AI5L)", "group": "Configuration and settings", "area": "holding", "address": 4486, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Positive only] POS"}, {"name": "AI1 lowest process (AI1J)", "group": "Configuration and settings", "area": "holding", "address": 4502, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AI2 lowest process (AI2J)", "group": "Configuration and settings", "area": "holding", "address": 4503, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AI3 lowest process (AI3J)", "group": "Configuration and settings", "area": "holding", "address": 4504, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AI4 lowest process (AI4J)", "group": "Configuration and settings", "area": "holding", "address": 4505, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AI5 lowest process (AI5J)", "group": "Configuration and settings", "area": "holding", "address": 4506, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AI1 highest process (AI1K)", "group": "Configuration and settings", "area": "holding", "address": 4512, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AI2 highest process (AI2K)", "group": "Configuration and settings", "area": "holding", "address": 4513, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AI3 highest process (AI3K)", "group": "Configuration and settings", "area": "holding", "address": 4514, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AI4 highest process (AI4K)", "group": "Configuration and settings", "area": "holding", "address": 4515, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AI5 highest process (AI5K)", "group": "Configuration and settings", "area": "holding", "address": 4516, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AIV1 lowest process (AV1J)", "group": "Configuration and settings", "area": "holding", "address": 4522, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AIV2 lowest process (AV2J)", "group": "Configuration and settings", "area": "holding", "address": 4523, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AIV3 lowest process (AV3J)", "group": "Configuration and settings", "area": "holding", "address": 4524, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AIV1 highest process (AV1K)", "group": "Configuration and settings", "area": "holding", "address": 4532, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AIV2 highest process (AV2K)", "group": "Configuration and settings", "area": "holding", "address": 4533, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AIV3 highest process (AV3K)", "group": "Configuration and settings", "area": "holding", "address": 4534, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "AQ1 Type (AO1T)", "group": "Configuration and settings", "area": "holding", "address": 4601, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Current] 0A"}, {"name": "AQ2 Type (AO2T)", "group": "Configuration and settings", "area": "holding", "address": 4602, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Current] 0A"}, {"name": "AQ1 filter (AO1F)", "group": "Configuration and settings", "area": "holding", "address": 4611, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.00 s ... 10.00 s; Factory setting 0.00 s"}, {"name": "AQ2 filter (AO2F)", "group": "Configuration and settings", "area": "holding", "address": 4612, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.00 s ... 10.00 s; Factory setting 0.00 s"}, {"name": "AQ1 minimum output (UOL1)", "group": "Configuration and settings", "area": "holding", "address": 4621, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 0.0 V"}, {"name": "AQ2 minimum output (UOL2)", "group": "Configuration and settings", "area": "holding", "address": 4622, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 0.0 V"}, {"name": "AQ1 maximum output (UOH1)", "group": "Configuration and settings", "area": "holding", "address": 4631, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 10.0 V"}, {"name": "AQ2 maximum output (UOH2)", "group": "Configuration and settings", "area": "holding", "address": 4632, "type": "uint16", "scale": 0.1, "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 V ... 10.0 V; Factory setting 10.0 V"}, {"name": "AQ1 min output value (AOL1)", "group": "Configuration and settings", "area": "holding", "address": 4641, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 0.0 mA"}, {"name": "AQ2 min output value (AOL2)", "group": "Configuration and settings", "area": "holding", "address": 4642, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 0.0 mA"}, {"name": "AQ1 max output value (AOH1)", "group": "Configuration and settings", "area": "holding", "address": 4651, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 20.0 mA"}, {"name": "AQ2 max output value (AOH2)", "group": "Configuration and settings", "area": "holding", "address": 4652, "type": "uint16", "scale": 0.1, "unit": "mA", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 mA ... 20.0 mA; Factory setting 20.0 mA"}, {"name": "Scaling AQ1 min (ASL1)", "group": "Configuration and settings", "area": "holding", "address": 4661, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Scaling AQ2 min (ASL2)", "group": "Configuration and settings", "area": "holding", "address": 4662, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Scaling AQ1 max (ASH1)", "group": "Configuration and settings", "area": "holding", "address": 4671, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 % ... 100.0 %; Factory setting 100.0 %"}, {"name": "Scaling AQ2 max (ASH2)", "group": "Configuration and settings", "area": "holding", "address": 4672, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 % ... 100.0 %; Factory setting 100.0 %"}, {"name": "Enable AQ2 fallback (AOF2)", "group": "Configuration and settings", "area": "holding", "address": 4691, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "AIV1 assignment (AV1A)", "group": "Configuration and settings", "area": "holding", "address": 4861, "type": "uint16"}, {"name": "AIV2 assignment (AV2A)", "group": "Configuration and settings", "area": "holding", "address": 4862, "type": "uint16"}, {"name": "AIV3 assignment (AV3A)", "group": "Configuration and settings", "area": "holding", "address": 4863, "type": "uint16"}, {"name": "R1 assignment (R1)", "group": "Configuration and settings", "area": "holding", "address": 5001, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Device in operating state \"Fault\"] FLT"}, {"name": "R2 assignment (R2)", "group": "Configuration and settings", "area": "holding", "address": 5002, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "R3 assignment (R3)", "group": "Configuration and settings", "area": "holding", "address": 5003, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "R4 assignment (R4)", "group": "Configuration and settings", "area": "holding", "address": 5004, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "R5 assignment (R5)", "group": "Configuration and settings", "area": "holding", "address": 5005, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "R6 assignment (R6)", "group": "Configuration and settings", "area": "holding", "address": 5006, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "AQ1 assignment (AO1)", "group": "Configuration and settings", "area": "holding", "address": 5021, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Motor frequency] OFR"}, {"name": "AQ2 assignment (AO2)", "group": "Configuration and settings", "area": "holding", "address": 5022, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Motor current] OCR"}, {"name": "DO11 assignment (DO11)", "group": "Configuration and settings", "area": "holding", "address": 5033, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "DO12 assignment (DO12)", "group": "Configuration and settings", "area": "holding", "address": 5034, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "R60 assignment (R60)", "group": "Configuration and settings", "area": "holding", "address": 5040, "type": "uint16", "description": "Factory setting Refer to programming manual"}, {"name": "R61 assignment (R61)", "group": "Configuration and settings", "area": "holding", "address": 5041, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "R62 assignment (R62)", "group": "Configuration and settings", "area": "holding", "address": 5042, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "R63 assignment (R63)", "group": "Configuration and settings", "area": "holding", "address": 5043, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "R64 assignment (R64)", "group": "Configuration and settings", "area": "holding", "address": 5044, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "R65 assignment (R65)", "group": "Configuration and settings", "area": "holding", "address": 5045, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "R66 assignment (R66)", "group": "Configuration and settings", "area": "holding", "address": 5046, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Logic inputs physical image (IL1I)", "group": "I/O parameters", "area": "holding", "address": 5201, "type": "uint16"}, {"name": "Logic inputs states (IL1R)", "group": "I/O parameters", "area": "holding", "address": 5202, "type": "uint16"}, {"name": "Cabinet input physical state (ILCI)", "group": "I/O parameters", "area": "holding", "address": 5203, "type": "uint16"}, {"name": "Cabinet IO : Logic inputs real image (bit0 = DI50 ...) (ILCR)", "group": "I/O parameters", "area": "holding", "address": 5204, "type": "uint16"}, {"name": "Logic outputs states (OL1R)", "group": "I/O parameters", "area": "holding", "address": 5212, "type": "uint16", "access": "RW"}, {"name": "Cabinet Ouput physical state (OLCI)", "group": "I/O parameters", "area": "holding", "address": 5213, "type": "uint16"}, {"name": "Cabinet IO : Logic outputs real image (bit0 = R60 ...) (OLCR)", "group": "I/O parameters", "area": "holding", "address": 5214, "type": "uint16", "access": "RW"}, {"name": "AI1 input physical image (MAX = 8192) (AI1I)", "group": "Measurement parameters", "area": "holding", "address": 5222, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "AI2 input physical image (MAX = 8192) (AI2I)", "group": "Measurement parameters", "area": "holding", "address": 5223, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "AI3 input physical image (MAX = 8192) (AI3I)", "group": "Measurement parameters", "area": "holding", "address": 5224, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "AI4 input physical image (MAX = 8192) (AI4I)", "group": "Measurement parameters", "area": "holding", "address": 5225, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "AI5 input physical image (MAX = 8192) (AI5I)", "group": "Measurement parameters", "area": "holding", "address": 5226, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "Analog input 1 standardized value (AI1R)", "group": "I/O parameters", "area": "holding", "address": 5232, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "Analog input 2 standardized value (AI2R)", "group": "I/O parameters", "area": "holding", "address": 5233, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "Analog input 3 standardized value (AI3R)", "group": "I/O parameters", "area": "holding", "address": 5234, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "Analog input 4 standardized value (AI4R)", "group": "I/O parameters", "area": "holding", "address": 5235, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "Analog input 5 standardized value (AI5R)", "group": "I/O parameters", "area": "holding", "address": 5236, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "Physical value AI1 (AI1C)", "group": "I/O parameters", "area": "holding", "address": 5242, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Physical value AI2 (AI2C)", "group": "I/O parameters", "area": "holding", "address": 5243, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Physical value AI3 (AI3C)", "group": "I/O parameters", "area": "holding", "address": 5244, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Physical value AI4 (AI4C)", "group": "I/O parameters", "area": "holding", "address": 5245, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Physical value AI5 (AI5C)", "group": "I/O parameters", "area": "holding", "address": 5246, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "AO1 output physical image (MAX = 8192) (AO1I)", "group": "I/O parameters", "area": "holding", "address": 5251, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "AO2 output physical image (MAX = 8192) (AO2I)", "group": "I/O parameters", "area": "holding", "address": 5252, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "Analog output 1 standardized value (AO1R)", "group": "I/O parameters", "area": "holding", "address": 5261, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "Analog output 2 standardized value (AO2R)", "group": "I/O parameters", "area": "holding", "address": 5262, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "AQ1 physical value (AO1C)", "group": "I/O parameters", "area": "holding", "address": 5271, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "AQ2 physical value (AO2C)", "group": "I/O parameters", "area": "holding", "address": 5272, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "AIV1 Image input (AIV1)", "group": "Setpoint parameters", "area": "holding", "address": 5281, "type": "int16", "access": "RW", "description": "Range -10000 ... 10000; Factory setting 0"}, {"name": "Channel assignment for virtual Analog input AIV1 (AIC1)", "group": "Configuration and settings", "area": "holding", "address": 5282, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "AIV2 Image input (AIV2)", "group": "Setpoint parameters", "area": "holding", "address": 5283, "type": "int16", "access": "RW", "description": "Range -10000 ... 10000; Factory setting 0"}, {"name": "Channel assignment for virtual Analog input AIV2 (AIC2)", "group": "Configuration and settings", "area": "holding", "address": 5284, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "AIV3 Image input (AIV3)", "group": "Setpoint parameters", "area": "holding", "address": 5285, "type": "int16", "access": "RW", "description": "Range -10000 ... 10000; Factory setting 0"}, {"name": "Channel assignment for virtual Analog input AIV3 (AIC3)", "group": "Configuration and settings", "area": "holding", "address": 5286, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Configuration of virtual analog input AIV1 (AV1T)", "group": "Configuration and settings", "area": "holding", "address": 5287, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [+/- 8192] INEG"}, {"name": "Configuration of virtual analog input AIV2 (AV2T)", "group": "Configuration and settings", "area": "holding", "address": 5288, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [+/- 8192] INEG"}, {"name": "Configuration of virtual analog input AIV3 (AV3T)", "group": "Configuration and settings", "area": "holding", "address": 5290, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [+/- 8192] INEG"}, {"name": "AI1 physical value without filter (SAI1)", "group": "Measurement parameters", "area": "holding", "address": 5291, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "AI2 physical value without filter (SAI2)", "group": "Measurement parameters", "area": "holding", "address": 5292, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "AI3 physical value without filter (SAI3)", "group": "Measurement parameters", "area": "holding", "address": 5293, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "AI4 physical value without filter (SAI4)", "group": "Measurement parameters", "area": "holding", "address": 5294, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "AO1 physical value without filter (SAO1)", "group": "Actual values parameters", "area": "holding", "address": 5295, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "AO2 physical value without filter (SAO2)", "group": "Actual values parameters", "area": "holding", "address": 5296, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "AI5 physical value without filter (SAI5)", "group": "Measurement parameters", "area": "holding", "address": 5298, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Device modbus address (ADD)", "group": "Configuration and settings", "area": "holding", "address": 6001, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 247; Factory setting 0"}, {"name": "Modbus baud rate (TBR)", "group": "Configuration and settings", "area": "holding", "address": 6003, "type": "uint16", "access": "RW", "enum": {"4": "Automatic", "8": "300 bps", "12": "600 bps", "16": "1.2 Kbps", "20": "2.4 Kbps", "24": "4800 bps", "28": "9600 bps", "30": "10 Kbps", "32": "19200 bps", "34": "20 Kbps", "35": "28.8 Kbps", "36": "38.4 Kbps", "37": "45.45 Kbps", "38": "50 Kbps", "40": "57.6 Kbps", "41": "76.8 Kbps", "42": "93.75 Kbps", "44": "100 Kbps", "48": "115.2 Kbps", "52": "125 Kbps", "53": "156 Kbps", "54": "187.5 Kbps", "56": "230.4 Kbps", "60": "250 Kbps", "64": "460.8 Kbps", "68": "500 Kbps", "69": "625 Kbps", "70": "800 Kbps", "72": "921.6 Kbps", "76": "1 Mbps", "80": "1.5 Mbps", "81": "2.5 Mbps", "82": "3 Mbps", "83": "6 Mbps", "84": "10 Mbps", "86": "5 Mbps", "88": "12 Mbps", "92": "100 Mbps"}, "description": "Writable only when the motor is stopped; Factory setting [19200 bps] 19200"}, {"name": "Modbus format (TFO)", "group": "Configuration and settings", "area": "holding", "address": 6004, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [8 bits even parity 1 stop bit] 8E1"}, {"name": "Modbus timeout (TTO)", "group": "Configuration and settings", "area": "holding", "address": 6005, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.1 s ... 30.0 s; Factory setting 10.0 s"}, {"name": "Terminal Modbus: Word order (TWO)", "group": "Configuration and settings", "area": "holding", "address": 6006, "type": "uint16", "access": "RW", "enum": {"0": "ModBus Word Order OFF", "1": "Modbus Word Order ON"}, "description": "Writable only when the motor is stopped; Factory setting [Modbus Word Order ON] HIGH"}, {"name": "Mdb CRC errors (M1EC)", "group": "Status parameters", "area": "holding", "address": 6010, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Mdb frame number (M1CT)", "group": "Status parameters", "area": "holding", "address": 6011, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Modbus 2 baud rate (TBR2)", "group": "Configuration and settings", "area": "holding", "address": 6023, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [19200 bps] 19200"}, {"name": "Modbus 2 format (TFO2)", "group": "Configuration and settings", "area": "holding", "address": 6024, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [8 bits even parity 1 stop bit] 8E1"}, {"name": "Terminal Modbus 2: Word order (TWO2)", "group": "Configuration and settings", "area": "holding", "address": 6026, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Modbus Word Order ON] HIGH"}, {"name": "Mdb NET CRC errors (M2EC)", "group": "Status parameters", "area": "holding", "address": 6030, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Mdb NET frames (M2CT)", "group": "Status parameters", "area": "holding", "address": 6031, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Device CANopen address (ADCO)", "group": "Configuration and settings", "area": "holding", "address": 6051, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 127; Factory setting 0"}, {"name": "CANopen baudrate (BDCO)", "group": "Configuration and settings", "area": "holding", "address": 6053, "type": "uint16", "access": "RW", "enum": {"38": "Baud rate 50kbps", "52": "Baud rate 125kbps", "60": "Baud rate 250kbps", "68": "Baud rate 500kbps", "76": "Baud rate 1Mbps"}, "description": "Writable only when the motor is stopped; Factory setting [Baud rate 250kbps] 250K"}, {"name": "CANopen error (ERCO)", "group": "Configuration and settings", "area": "holding", "address": 6056, "type": "uint16", "description": "Range 0 ... 5"}, {"name": "Canopen NMT state (NMTS)", "group": "Status parameters", "area": "holding", "address": 6057, "type": "uint16", "enum": {"0": "On boot up", "2": "Stopped", "1": "Operational", "4": "Pre operation"}}, {"name": "TX error counter (TEC1)", "group": "Status parameters", "area": "holding", "address": 6058, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "RX error counter (REC1)", "group": "Status parameters", "area": "holding", "address": 6059, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "TPDO1 Event mask (PEV1)", "group": "Communication parameters", "area": "holding", "address": 6070, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting 15"}, {"name": "TPDO2 Event mask (PEV2)", "group": "Communication parameters", "area": "holding", "address": 6071, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting 15"}, {"name": "TPDO3 Event mask (PEV3)", "group": "Communication parameters", "area": "holding", "address": 6072, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting 15"}, {"name": "TPDO4 Event mask (PEV4)", "group": "Communication parameters", "area": "holding", "address": 6073, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting 15"}, {"name": "MultiDrive Link communication timeout (MLTO)", "group": "Configuration and settings", "area": "holding", "address": 6085, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.05 s ... 10.00 s; Factory setting 0.25 s"}, {"name": "Device address (ADRC)", "group": "Configuration and settings", "area": "holding", "address": 6601, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting Refer to programming manual"}, {"name": "Comm. option baudrate (BDR)", "group": "Configuration and settings", "area": "holding", "address": 6603, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Automatic] AUTO"}, {"name": "Frame format (FOR)", "group": "Configuration and settings", "area": "holding", "address": 6604, "type": "uint16", "access": "RW", "enum": {"2": "8bit odd parity 1stop bit", "3": "8 bits even parity 1 stop bit", "4": "8bit no parity 1stop bit", "5": "8bit no parity 2stop bits"}}, {"name": "Fieldbus timeout (TLP)", "group": "Configuration and settings", "area": "holding", "address": 6605, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 1.0 s ... 60.0 s; Factory setting 1.0 s"}, {"name": "BACnet max master module address (MMN)", "group": "Configuration and settings", "area": "holding", "address": 6632, "type": "uint16", "access": "RW", "description": "Range 1 ... 127; Factory setting 1"}, {"name": "BACnet maximum information frames (MIF)", "group": "Configuration and settings", "area": "holding", "address": 6633, "type": "uint16", "access": "RW", "description": "Range 1 ... 100; Factory setting 10"}, {"name": "BACnet instance number (INXP)", "group": "Configuration and settings", "area": "holding", "address": 6634, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 ... 4194303; Factory setting 1"}, {"name": "Mdb add comm. module (AMOC)", "group": "Configuration and settings", "area": "holding", "address": 6651, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 247; Factory setting 0"}, {"name": "Data rate used (BDRU)", "group": "Configuration and settings", "area": "holding", "address": 6660, "type": "uint16", "access": "RW", "description": "Factory setting [Automatic] AUTO"}, {"name": "BACnet received frame counter (TFCR)", "group": "Configuration and settings", "area": "holding", "address": 6661, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535"}, {"name": "BACnet incorrect frame counter (EFC)", "group": "Configuration and settings", "area": "holding", "address": 6662, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535"}, {"name": "BACnet transmitted frame counter (TFCT)", "group": "Configuration and settings", "area": "holding", "address": 6664, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535"}, {"name": "PPO profile used (PRFL)", "group": "Configuration and settings", "area": "holding", "address": 6665, "type": "uint16", "access": "RW", "enum": {"0": "Not configured", "1": "1", "100": "100", "101": "101", "102": "102", "106": "106", "107": "107"}, "description": "Factory setting Refer to programming manual"}, {"name": "DP Master active (DPMA)", "group": "Communication parameters", "area": "holding", "address": 6666, "type": "uint16", "access": "RW", "enum": {"1": "Master 1", "2": "Master 2"}, "description": "Factory setting [Master 1] 1"}, {"name": "Configured assembly (CIOA)", "group": "Configuration and settings", "area": "holding", "address": 6667, "type": "uint16", "access": "RW", "enum": {"0": "20/70", "1": "21/71", "2": "100/101", "3": "Unconfigured"}, "description": "Factory setting [21/71] 21"}, {"name": "Input Phase Loss assignment (IPL)", "group": "Configuration and settings", "area": "holding", "address": 7002, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Response to 4-20mA loss on AI2 (LFL2)", "group": "Configuration and settings", "area": "holding", "address": 7003, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ignore] NO"}, {"name": "Stop type on power loss (STP)", "group": "Configuration and settings", "area": "holding", "address": 7004, "type": "uint16", "access": "RW", "enum": {"0": "Inactive", "1": "Maintain DC Bus", "2": "Ramp Stop", "4": "Locked in freewheel stop without error", "5": "Automatic DC Bus maintain"}, "description": "Writable only when the motor is stopped; Factory setting [Inactive] NO"}, {"name": "Device response to external error (EPL)", "group": "Configuration and settings", "area": "holding", "address": 7006, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Drive overtemp error response (OHL)", "group": "Configuration and settings", "area": "holding", "address": 7008, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Motor overtemp error response (OLL)", "group": "Configuration and settings", "area": "holding", "address": 7009, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to Modbus interruption (SLL)", "group": "Configuration and settings", "area": "holding", "address": 7010, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to CANopen error (COL)", "group": "Configuration and settings", "area": "holding", "address": 7011, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to Autotuning error (TNL)", "group": "Configuration and settings", "area": "holding", "address": 7012, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to 4-20mA loss on AI3 (LFL3)", "group": "Configuration and settings", "area": "holding", "address": 7013, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ignore] NO"}, {"name": "Response to 4-20mA loss on AI4 (LFL4)", "group": "Configuration and settings", "area": "holding", "address": 7014, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ignore] NO"}, {"name": "Response to Fieldbus module communication interruption (CLL)", "group": "Configuration and settings", "area": "holding", "address": 7015, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to 4-20mA loss on AI1 (LFL1)", "group": "Configuration and settings", "area": "holding", "address": 7017, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ignore] NO"}, {"name": "Response to 4-20mA loss on AI5 (LFL5)", "group": "Configuration and settings", "area": "holding", "address": 7019, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ignore] NO"}, {"name": "Ethernet error response (ETHL)", "group": "Configuration and settings", "area": "holding", "address": 7021, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Fieldbus communication loss fallback channel (AFFL)", "group": "Configuration and settings", "area": "holding", "address": 7024, "type": "uint16", "access": "RW", "enum": {"0": "Not active", "1": "Fallback to channel 1", "2": "Fallback to channel 2", "3": "Uninterrupted fallback to channel 1", "4": "Uninterrupted fallback to channel 2"}, "description": "Factory setting [Not active] NO"}, {"name": "AI loss inhibition (INLF)", "group": "Configuration and settings", "area": "holding", "address": 7026, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Speed maintain's behavior (RLS)", "group": "Configuration and settings", "area": "holding", "address": 7027, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range -0.1 Hz ... 0.0 Hz; Factory setting 0.0 Hz"}, {"name": "Ground fault activation (GRFL)", "group": "Configuration and settings", "area": "holding", "address": 7030, "type": "int16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range -0.2 % ... 100.0 %; Factory setting -0.1 %"}, {"name": "Fall back speed (LFF)", "group": "Configuration and settings", "area": "holding", "address": 7080, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Output Phase Loss delay (ODT)", "group": "Configuration and settings", "area": "holding", "address": 7081, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.5 s ... 10.0 s; Factory setting 0.5 s"}, {"name": "Last error occurred (LFT)", "group": "Fault parameters", "area": "holding", "address": 7121, "type": "uint16", "enum": {"0": "No error detected", "2": "Control memory error", "3": "Incorrect configuration", "4": "Invalid configuration", "5": "Modbus communication interruption", "6": "Internal communication interruption with option module", "7": "Fieldbus communication interruption", "8": "External detected error", "9": "Overcurrent", "10": "Precharge capacitor", "13": "AI2 4-20mA loss", "15": "Input Overheating", "16": "Device overheating", "17": "Motor overload", "18": "DC bus overvoltage", "19": "Supply mains overvoltage", "20": "Single output phase loss", "21": "Input phase loss", "22": "Supply mains undervoltage", "23": "Motor short circuit", "24": "Motor overspeed", "25": "Autotuning detected error", "26": "Internal error 1 (Rating)", "27": "Internal error 2 (Soft)", "28": "Internal error 3 (Intern Comm)", "29": "Internal error 4 (Manufacturing)", "30": "Power memory error", "32": "Ground short circuit", "33": "Output phase loss", "34": "CANopen communication interruption", "37": "Internal error 7 (Init)", "38": "External error detected by Fieldbus", "40": "Internal error 8 (Switching Supply)", "42": "PC communication interruption", "45": "HMI communication interruption", "51": "Internal error 9 (Measure)", "52": "Internal error 10 (Mains)", "53": "Internal error 11 (Temperature)", "54": "Device overheating", "55": "IGBT short circuit", "56": "Motor short circuit", "58": "Output contactor closed error", "59": "Output contactor opened error", "60": "Internal error 12 (Internal current supply)", "64": "input contactor", "68": "Internal error 6 (Option)", "69": "Internal error 14 (CPU)", "71": "AI3 4-20mA loss", "72": "AI4 4-20mA loss", "73": "Boards compatibility", "77": "Configuration transfer error", "79": "AI5 4-20 mA loss", "80": "Fan feedback error", "81": "Module overheat error", "82": "ON lock error", "99": "Channel switching detected error", "100": "Process underload", "101": "Process overload", "105": "Angle error", "106": "AI1 4-20 mA loss", "107": "Safety function detected error", "110": "AI2 thermal level error", "111": "Thermal sensor error on AI2", "112": "AI3 thermal level error", "113": "Thermal sensor error on AI3", "114": "Pump cycle start error", "115": "Outlet pressure low", "116": "High flow error", "117": "Inlet pressure detected error", "119": "Pump low flow detected error", "120": "AI4 thermal level error", "121": "Thermal sensor error on AI4", "122": "AI5 thermal level error", "123": "Thermal sensor error on AI5", "124": "Anti Jam detected error", "125": "Outlet pressure high", "126": "Dry run detected error", "127": "PID feedback detected error", "128": "Program loading detected error", "129": "Program running detected error", "130": "Lead pump not available", "131": "Low level error", "132": "High level error", "142": "Internal error 16 (IO module - relay)", "143": "Internal error 17 (IO module - Standard)", "144": "Internal error 0 (IPC)", "146": "Internal error 13 (Diff current)", "148": "Motor stall detected error", "149": "Internal error 21 (RTC)", "150": "Embedded Ethernet communication interruption", "151": "Internal error 15 (Flash)", "152": "Firmware Update error", "153": "Internal error 22 (Embedded Ethernet)", "154": "Internal error 25 (Incompatibility CB & SW)", "155": "Internal error 20 (option interface PCBA)", "157": "Internal error 27 (Diagnostics CPLD)", "158": "Internal error 23 (Module link)", "159": "AFE ShortCircuit error", "160": "AFE Bus unbalancing", "161": "Internal error 28 (AFE)", "162": "Monitoring circuit A error", "163": "Monitoring circuit B error", "164": "Monitoring circuit C error", "165": "Monitoring circuit D error", "166": "Cabinet circuit A error", "167": "Cabinet circuit B error", "168": "Cabinet circuit C error", "169": "Motor winding A error", "170": "Motor winding B error", "171": "Motor bearing A error", "172": "Motor bearing B error", "173": "Cabinet overheat error", "174": "AFE Mains undervoltage", "175": "Internal error 31 (Missing brick)", "176": "Internal error 29 (Inverter)", "177": "Internal error 30 (Rectifier)", "179": "AFE IGBT over-heat error", "180": "AFE contactor feedback error", "181": "Pre-settings transfer error", "182": "Circuit breaker error", "186": "MultiDrive Link error", "190": "Multipump device error", "191": "AFE DC-capacitors error", "192": "AFE current control error", "193": "Mains frequency out of range", "200": "FDR Eth embedded error", "201": "FDR Eth module error", "203": "Cabinet I/O 24V missing error", "206": "DC Bus ripple error", "207": "Vortex control error", "208": "Idle mode exit error", "211": "Security files corrupt", "212": "AFE Line filter error", "213": "Cooling pump error", "220": "Advanced function locked error"}}, {"name": "Automatic fault reset (ATR)", "group": "Configuration and settings", "area": "holding", "address": 7122, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Fault Reset time (TAR)", "group": "Configuration and settings", "area": "holding", "address": 7123, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [5 minutes] 5"}, {"name": "Fault reset input assignment (RSF)", "group": "Configuration and settings", "area": "holding", "address": 7124, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Disable error detection (INH)", "group": "Configuration and settings", "area": "holding", "address": 7125, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Forced Run (INHS)", "group": "Configuration and settings", "area": "holding", "address": 7126, "type": "uint16", "access": "RW", "enum": {"0": "Disabled", "1": "Forced Run in forward direction", "2": "Forced Run in reverse direction"}, "description": "Writable only when the motor is stopped; Factory setting [Disabled] NO"}, {"name": "Forced Run reference frequency (INHR)", "group": "Configuration and settings", "area": "holding", "address": 7127, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 6553.5 Hz; Factory setting Refer to programming manual"}, {"name": "Product restart (RP)", "group": "Configuration and settings", "area": "holding", "address": 7128, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Product restart assignment (RPA)", "group": "Configuration and settings", "area": "holding", "address": 7129, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Incorrect configuration (CIC)", "group": "Fault parameters", "area": "holding", "address": 7130, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "External error assignment (ETF)", "group": "Configuration and settings", "area": "holding", "address": 7131, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Fieldbus module Communication interruption (CNF)", "group": "Fault parameters", "area": "holding", "address": 7132, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535"}, {"name": "Internal communication interruption 1 (ILF1)", "group": "Fault parameters", "area": "holding", "address": 7134, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535"}, {"name": "Ethernet embedded fault (ETHF) (ETHF)", "group": "Fault parameters", "area": "holding", "address": 7136, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535"}, {"name": "Internal error 6 (Module identification error) information (INF6)", "group": "History parameters", "area": "holding", "address": 7137, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "EPF2 (external error detected by fieldbus) info (EPF2)", "group": "Configuration and settings", "area": "holding", "address": 7144, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535"}, {"name": "Extended fault reset activation (HRFC)", "group": "Configuration and settings", "area": "holding", "address": 7150, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Error SubCode (DSC)", "group": "Fault parameters", "area": "holding", "address": 7157, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Incorrect configuration 2 (CIC2)", "group": "Fault parameters", "area": "holding", "address": 7190, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Fault code on last fault (DP0)", "group": "History parameters", "area": "holding", "address": 7200, "type": "uint16"}, {"name": "Fault code on fault n-1 (DP1)", "group": "History parameters", "area": "holding", "address": 7201, "type": "uint16"}, {"name": "Fault code on fault n-2 (DP2)", "group": "History parameters", "area": "holding", "address": 7202, "type": "uint16"}, {"name": "Fault code on fault n-3 (DP3)", "group": "History parameters", "area": "holding", "address": 7203, "type": "uint16"}, {"name": "Fault code on fault n-4 (DP4)", "group": "History parameters", "area": "holding", "address": 7204, "type": "uint16"}, {"name": "Fault code on fault n-5 (DP5)", "group": "History parameters", "area": "holding", "address": 7205, "type": "uint16"}, {"name": "Fault code on fault n-6 (DP6)", "group": "History parameters", "area": "holding", "address": 7206, "type": "uint16"}, {"name": "Fault code on fault n-7 (DP7)", "group": "History parameters", "area": "holding", "address": 7207, "type": "uint16"}, {"name": "Fault code on fault n-8 (DP8)", "group": "History parameters", "area": "holding", "address": 7208, "type": "uint16"}, {"name": "Last error 9 (DP9)", "group": "History parameters", "area": "holding", "address": 7209, "type": "uint16"}, {"name": "State word (EP0)", "group": "History parameters", "area": "holding", "address": 7210, "type": "uint16"}, {"name": "Status of last error 1 (EP1)", "group": "History parameters", "area": "holding", "address": 7211, "type": "uint16"}, {"name": "Status of last error 2 (EP2)", "group": "History parameters", "area": "holding", "address": 7212, "type": "uint16"}, {"name": "Status of last error 3 (EP3)", "group": "History parameters", "area": "holding", "address": 7213, "type": "uint16"}, {"name": "Status of last error 4 (EP4)", "group": "History parameters", "area": "holding", "address": 7214, "type": "uint16"}, {"name": "State word (EP5)", "group": "History parameters", "area": "holding", "address": 7215, "type": "uint16"}, {"name": "State word (EP6)", "group": "History parameters", "area": "holding", "address": 7216, "type": "uint16"}, {"name": "State word (EP7)", "group": "History parameters", "area": "holding", "address": 7217, "type": "uint16"}, {"name": "State word (EP8)", "group": "History parameters", "area": "holding", "address": 7218, "type": "uint16"}, {"name": "State word (EP9)", "group": "History parameters", "area": "holding", "address": 7219, "type": "uint16"}, {"name": "ETI state word (IP0)", "group": "History parameters", "area": "holding", "address": 7220, "type": "uint16"}, {"name": "ETI state word (IP1)", "group": "History parameters", "area": "holding", "address": 7221, "type": "uint16"}, {"name": "ETI state word (IP2)", "group": "History parameters", "area": "holding", "address": 7222, "type": "uint16"}, {"name": "ETI state word (IP3)", "group": "History parameters", "area": "holding", "address": 7223, "type": "uint16"}, {"name": "ETI state word (IP4)", "group": "History parameters", "area": "holding", "address": 7224, "type": "uint16"}, {"name": "ETI state word (IP5)", "group": "History parameters", "area": "holding", "address": 7225, "type": "uint16"}, {"name": "ETI state word (IP6)", "group": "History parameters", "area": "holding", "address": 7226, "type": "uint16"}, {"name": "ETI state word (IP7)", "group": "History parameters", "area": "holding", "address": 7227, "type": "uint16"}, {"name": "ETI state word (IP8)", "group": "History parameters", "area": "holding", "address": 7228, "type": "uint16"}, {"name": "ETI state word (IP9)", "group": "History parameters", "area": "holding", "address": 7229, "type": "uint16"}, {"name": "Cmd word (CMP0)", "group": "History parameters", "area": "holding", "address": 7230, "type": "uint16"}, {"name": "Cmd word (CMP1)", "group": "History parameters", "area": "holding", "address": 7231, "type": "uint16"}, {"name": "Cmd word (CMP2)", "group": "History parameters", "area": "holding", "address": 7232, "type": "uint16"}, {"name": "Cmd word (CMP3)", "group": "History parameters", "area": "holding", "address": 7233, "type": "uint16"}, {"name": "Cmd word (CMP4)", "group": "History parameters", "area": "holding", "address": 7234, "type": "uint16"}, {"name": "Cmd word (CMP5)", "group": "History parameters", "area": "holding", "address": 7235, "type": "uint16"}, {"name": "Cmd word (CMP6)", "group": "History parameters", "area": "holding", "address": 7236, "type": "uint16"}, {"name": "Cmd word (CMP7)", "group": "History parameters", "area": "holding", "address": 7237, "type": "uint16"}, {"name": "Cmd word (CMP8)", "group": "History parameters", "area": "holding", "address": 7238, "type": "uint16"}, {"name": "Cmd word (CMP9)", "group": "History parameters", "area": "holding", "address": 7239, "type": "uint16"}, {"name": "Motor current (LCP0)", "group": "History parameters", "area": "holding", "address": 7240, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCP1)", "group": "History parameters", "area": "holding", "address": 7241, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCP2)", "group": "History parameters", "area": "holding", "address": 7242, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCP3)", "group": "History parameters", "area": "holding", "address": 7243, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCP4)", "group": "History parameters", "area": "holding", "address": 7244, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCP5)", "group": "History parameters", "area": "holding", "address": 7245, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCP6)", "group": "History parameters", "area": "holding", "address": 7246, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCP7)", "group": "History parameters", "area": "holding", "address": 7247, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCP8)", "group": "History parameters", "area": "holding", "address": 7248, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCP9)", "group": "History parameters", "area": "holding", "address": 7249, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Output frequency (RFP0)", "group": "History parameters", "area": "holding", "address": 7250, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Output frequency (RFP1)", "group": "History parameters", "area": "holding", "address": 7251, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Output frequency (RFP2)", "group": "History parameters", "area": "holding", "address": 7252, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Output frequency (RFP3)", "group": "History parameters", "area": "holding", "address": 7253, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Output frequency (RFP4)", "group": "History parameters", "area": "holding", "address": 7254, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Output frequency (RFP5)", "group": "History parameters", "area": "holding", "address": 7255, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Output frequency (RFP6)", "group": "History parameters", "area": "holding", "address": 7256, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Output frequency (RFP7)", "group": "History parameters", "area": "holding", "address": 7257, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Output frequency (RFP8)", "group": "History parameters", "area": "holding", "address": 7258, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Motor frequency (RFP9)", "group": "History parameters", "area": "holding", "address": 7259, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Run Elapsed time (RTP0)", "group": "History parameters", "area": "holding", "address": 7260, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTP1)", "group": "History parameters", "area": "holding", "address": 7261, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTP2)", "group": "History parameters", "area": "holding", "address": 7262, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTP3)", "group": "History parameters", "area": "holding", "address": 7263, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTP4)", "group": "History parameters", "area": "holding", "address": 7264, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTP5)", "group": "History parameters", "area": "holding", "address": 7265, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTP6)", "group": "History parameters", "area": "holding", "address": 7266, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTP7)", "group": "History parameters", "area": "holding", "address": 7267, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTP8)", "group": "History parameters", "area": "holding", "address": 7268, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTP9)", "group": "History parameters", "area": "holding", "address": 7269, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "DC bus voltage (ULP0)", "group": "History parameters", "area": "holding", "address": 7270, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULP1)", "group": "History parameters", "area": "holding", "address": 7271, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULP2)", "group": "History parameters", "area": "holding", "address": 7272, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULP3)", "group": "History parameters", "area": "holding", "address": 7273, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULP4)", "group": "History parameters", "area": "holding", "address": 7274, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULP5)", "group": "History parameters", "area": "holding", "address": 7275, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULP6)", "group": "History parameters", "area": "holding", "address": 7276, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULP7)", "group": "History parameters", "area": "holding", "address": 7277, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULP8)", "group": "History parameters", "area": "holding", "address": 7278, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULP9)", "group": "History parameters", "area": "holding", "address": 7279, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "Motor thermal state (THP0)", "group": "History parameters", "area": "holding", "address": 7280, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THP1)", "group": "History parameters", "area": "holding", "address": 7281, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THP2)", "group": "History parameters", "area": "holding", "address": 7282, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THP3)", "group": "History parameters", "area": "holding", "address": 7283, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THP4)", "group": "History parameters", "area": "holding", "address": 7284, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THP5)", "group": "History parameters", "area": "holding", "address": 7285, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THP6)", "group": "History parameters", "area": "holding", "address": 7286, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THP7)", "group": "History parameters", "area": "holding", "address": 7287, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THP8)", "group": "History parameters", "area": "holding", "address": 7288, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THP9)", "group": "History parameters", "area": "holding", "address": 7289, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Channels active on last fault (CRP0)", "group": "History parameters", "area": "holding", "address": 7290, "type": "uint16"}, {"name": "Active channels on fault n-1 (CRP1)", "group": "History parameters", "area": "holding", "address": 7291, "type": "uint16"}, {"name": "Active channels on fault n-2 (CRP2)", "group": "History parameters", "area": "holding", "address": 7292, "type": "uint16"}, {"name": "Active channels on fault n-3 (CRP3)", "group": "History parameters", "area": "holding", "address": 7293, "type": "uint16"}, {"name": "Active channels on fault n-4 (CRP4)", "group": "History parameters", "area": "holding", "address": 7294, "type": "uint16"}, {"name": "Active channels on fault n-5 (CRP5)", "group": "History parameters", "area": "holding", "address": 7295, "type": "uint16"}, {"name": "Active channels on fault n-6 (CRP6)", "group": "History parameters", "area": "holding", "address": 7296, "type": "uint16"}, {"name": "Active channels on fault n-7 (CRP7)", "group": "History parameters", "area": "holding", "address": 7297, "type": "uint16"}, {"name": "Active channels on fault n-8 (CRP8)", "group": "History parameters", "area": "holding", "address": 7298, "type": "uint16"}, {"name": "Active channels on error n-9 (CRP9)", "group": "History parameters", "area": "holding", "address": 7299, "type": "uint16"}, {"name": "Year, month and day of actual fault (MD0)", "group": "History parameters", "area": "holding", "address": 7300, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MD1)", "group": "History parameters", "area": "holding", "address": 7301, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MD2)", "group": "History parameters", "area": "holding", "address": 7302, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MD3)", "group": "History parameters", "area": "holding", "address": 7303, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MD4)", "group": "History parameters", "area": "holding", "address": 7304, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MD5)", "group": "History parameters", "area": "holding", "address": 7305, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MD6)", "group": "History parameters", "area": "holding", "address": 7306, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MD7)", "group": "History parameters", "area": "holding", "address": 7307, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MD8)", "group": "History parameters", "area": "holding", "address": 7308, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MD9)", "group": "History parameters", "area": "holding", "address": 7309, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of actual fault (DM0)", "group": "History parameters", "area": "holding", "address": 7310, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DM1)", "group": "History parameters", "area": "holding", "address": 7311, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DM2)", "group": "History parameters", "area": "holding", "address": 7312, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DM3)", "group": "History parameters", "area": "holding", "address": 7313, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DM4)", "group": "History parameters", "area": "holding", "address": 7314, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DM5)", "group": "History parameters", "area": "holding", "address": 7315, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DM6)", "group": "History parameters", "area": "holding", "address": 7316, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DM7)", "group": "History parameters", "area": "holding", "address": 7317, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DM8)", "group": "History parameters", "area": "holding", "address": 7318, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DM9)", "group": "History parameters", "area": "holding", "address": 7319, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "HMI status (HS1)", "group": "History parameters", "area": "holding", "address": 7321, "type": "uint16"}, {"name": "HMI status (HS2)", "group": "History parameters", "area": "holding", "address": 7322, "type": "uint16"}, {"name": "HMI status (HS3)", "group": "History parameters", "area": "holding", "address": 7323, "type": "uint16"}, {"name": "HMI status (HS4)", "group": "History parameters", "area": "holding", "address": 7324, "type": "uint16"}, {"name": "HMI status (HS5)", "group": "History parameters", "area": "holding", "address": 7325, "type": "uint16"}, {"name": "HMI status (HS6)", "group": "History parameters", "area": "holding", "address": 7326, "type": "uint16"}, {"name": "HMI status (HS7)", "group": "History parameters", "area": "holding", "address": 7327, "type": "uint16"}, {"name": "HMI status (HS8)", "group": "History parameters", "area": "holding", "address": 7328, "type": "uint16"}, {"name": "Device state (HS9)", "group": "History parameters", "area": "holding", "address": 7329, "type": "uint16"}, {"name": "Motor torque (OTP0)", "group": "History parameters", "area": "holding", "address": 7330, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTP1)", "group": "History parameters", "area": "holding", "address": 7331, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTP2)", "group": "History parameters", "area": "holding", "address": 7332, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTP3)", "group": "History parameters", "area": "holding", "address": 7333, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTP4)", "group": "History parameters", "area": "holding", "address": 7334, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTP5)", "group": "History parameters", "area": "holding", "address": 7335, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTP6)", "group": "History parameters", "area": "holding", "address": 7336, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTP7)", "group": "History parameters", "area": "holding", "address": 7337, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTP8)", "group": "History parameters", "area": "holding", "address": 7338, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTP9)", "group": "History parameters", "area": "holding", "address": 7339, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Drive thermal state (TDP0)", "group": "History parameters", "area": "holding", "address": 7340, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDP1)", "group": "History parameters", "area": "holding", "address": 7341, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDP2)", "group": "History parameters", "area": "holding", "address": 7342, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDP3)", "group": "History parameters", "area": "holding", "address": 7343, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDP4)", "group": "History parameters", "area": "holding", "address": 7344, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDP5)", "group": "History parameters", "area": "holding", "address": 7345, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDP6)", "group": "History parameters", "area": "holding", "address": 7346, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDP7)", "group": "History parameters", "area": "holding", "address": 7347, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDP8)", "group": "History parameters", "area": "holding", "address": 7348, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDP9)", "group": "History parameters", "area": "holding", "address": 7349, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "IGBT junction temp (TJP0)", "group": "History parameters", "area": "holding", "address": 7350, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJP1)", "group": "History parameters", "area": "holding", "address": 7351, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJP2)", "group": "History parameters", "area": "holding", "address": 7352, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJP3)", "group": "History parameters", "area": "holding", "address": 7353, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJP4)", "group": "History parameters", "area": "holding", "address": 7354, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJP5)", "group": "History parameters", "area": "holding", "address": 7355, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJP6)", "group": "History parameters", "area": "holding", "address": 7356, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJP7)", "group": "History parameters", "area": "holding", "address": 7357, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJP8)", "group": "History parameters", "area": "holding", "address": 7358, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJP9)", "group": "History parameters", "area": "holding", "address": 7359, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "Switching frequency (SFP0)", "group": "History parameters", "area": "holding", "address": 7360, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFP1)", "group": "History parameters", "area": "holding", "address": 7361, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFP2)", "group": "History parameters", "area": "holding", "address": 7362, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFP3)", "group": "History parameters", "area": "holding", "address": 7363, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFP4)", "group": "History parameters", "area": "holding", "address": 7364, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFP5)", "group": "History parameters", "area": "holding", "address": 7365, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFP6)", "group": "History parameters", "area": "holding", "address": 7366, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFP7)", "group": "History parameters", "area": "holding", "address": 7367, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFP8)", "group": "History parameters", "area": "holding", "address": 7368, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFP9)", "group": "History parameters", "area": "holding", "address": 7369, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Fault counter (FNB)", "group": "Fault parameters", "area": "holding", "address": 7393, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Last error 10 (DPA)", "group": "History parameters", "area": "holding", "address": 7600, "type": "uint16"}, {"name": "Last error 11 (DPB)", "group": "History parameters", "area": "holding", "address": 7601, "type": "uint16"}, {"name": "Last error 12 (DPC)", "group": "History parameters", "area": "holding", "address": 7602, "type": "uint16"}, {"name": "Last error 13 (DPD)", "group": "History parameters", "area": "holding", "address": 7603, "type": "uint16"}, {"name": "Last error 14 (DPE)", "group": "History parameters", "area": "holding", "address": 7604, "type": "uint16"}, {"name": "Last error 15 (DPF)", "group": "History parameters", "area": "holding", "address": 7605, "type": "uint16"}, {"name": "State word (EPA)", "group": "History parameters", "area": "holding", "address": 7610, "type": "uint16"}, {"name": "State word (EPB)", "group": "History parameters", "area": "holding", "address": 7611, "type": "uint16"}, {"name": "State word (EPC)", "group": "History parameters", "area": "holding", "address": 7612, "type": "uint16"}, {"name": "State word (EPD)", "group": "History parameters", "area": "holding", "address": 7613, "type": "uint16"}, {"name": "State word (EPE)", "group": "History parameters", "area": "holding", "address": 7614, "type": "uint16"}, {"name": "State word (EPF)", "group": "History parameters", "area": "holding", "address": 7615, "type": "uint16"}, {"name": "ETI state word (IPA)", "group": "History parameters", "area": "holding", "address": 7620, "type": "uint16"}, {"name": "ETI state word (IPB)", "group": "History parameters", "area": "holding", "address": 7621, "type": "uint16"}, {"name": "ETI state word (IPC)", "group": "History parameters", "area": "holding", "address": 7622, "type": "uint16"}, {"name": "ETI state word (IPD)", "group": "History parameters", "area": "holding", "address": 7623, "type": "uint16"}, {"name": "ETI state word (IPE)", "group": "History parameters", "area": "holding", "address": 7624, "type": "uint16"}, {"name": "ETI state word (IPF)", "group": "History parameters", "area": "holding", "address": 7625, "type": "uint16"}, {"name": "Cmd word (CMPA)", "group": "History parameters", "area": "holding", "address": 7630, "type": "uint16"}, {"name": "Cmd word (CMPB)", "group": "History parameters", "area": "holding", "address": 7631, "type": "uint16"}, {"name": "CMD command word (CMPC)", "group": "History parameters", "area": "holding", "address": 7632, "type": "uint16"}, {"name": "CMD command word (CMPD)", "group": "History parameters", "area": "holding", "address": 7633, "type": "uint16"}, {"name": "CMD command word (CMPE)", "group": "History parameters", "area": "holding", "address": 7634, "type": "uint16"}, {"name": "CMD command word (CMPF)", "group": "History parameters", "area": "holding", "address": 7635, "type": "uint16"}, {"name": "Motor current (LCPA)", "group": "History parameters", "area": "holding", "address": 7640, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCPB)", "group": "History parameters", "area": "holding", "address": 7641, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCPC)", "group": "History parameters", "area": "holding", "address": 7642, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCPD)", "group": "History parameters", "area": "holding", "address": 7643, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCPE)", "group": "History parameters", "area": "holding", "address": 7644, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor current (LCPF)", "group": "History parameters", "area": "holding", "address": 7645, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Motor frequency (RFPA)", "group": "History parameters", "area": "holding", "address": 7650, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Motor frequency (RFPB)", "group": "History parameters", "area": "holding", "address": 7651, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Motor frequency (RFPC)", "group": "History parameters", "area": "holding", "address": 7652, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Motor frequency (RFPD)", "group": "History parameters", "area": "holding", "address": 7653, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Motor frequency (RFPE)", "group": "History parameters", "area": "holding", "address": 7654, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Motor frequency (RFPF)", "group": "History parameters", "area": "holding", "address": 7655, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Run Elapsed time (RTPA)", "group": "History parameters", "area": "holding", "address": 7660, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTPB)", "group": "History parameters", "area": "holding", "address": 7661, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTPC)", "group": "History parameters", "area": "holding", "address": 7662, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTPD)", "group": "History parameters", "area": "holding", "address": 7663, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTPE)", "group": "History parameters", "area": "holding", "address": 7664, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "Run Elapsed time (RTPF)", "group": "History parameters", "area": "holding", "address": 7665, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "DC bus voltage (ULPA)", "group": "History parameters", "area": "holding", "address": 7670, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULPB)", "group": "History parameters", "area": "holding", "address": 7671, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULPC)", "group": "History parameters", "area": "holding", "address": 7672, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULPD)", "group": "History parameters", "area": "holding", "address": 7673, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULPE)", "group": "History parameters", "area": "holding", "address": 7674, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "DC bus voltage (ULPF)", "group": "History parameters", "area": "holding", "address": 7675, "type": "uint16", "scale": 0.1, "unit": "V", "description": "Range 0.0 V ... 6553.5 V"}, {"name": "Motor thermal state (THPA)", "group": "History parameters", "area": "holding", "address": 7680, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THPB)", "group": "History parameters", "area": "holding", "address": 7681, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THPC)", "group": "History parameters", "area": "holding", "address": 7682, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THPD)", "group": "History parameters", "area": "holding", "address": 7683, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THPE)", "group": "History parameters", "area": "holding", "address": 7684, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Motor thermal state (THPF)", "group": "History parameters", "area": "holding", "address": 7685, "type": "uint16", "unit": "%", "description": "Range 0 % ... 65535 %"}, {"name": "Active channels on error n-10 (CRPA)", "group": "History parameters", "area": "holding", "address": 7690, "type": "uint16"}, {"name": "Active channels on error n-11 (CRPB)", "group": "History parameters", "area": "holding", "address": 7691, "type": "uint16"}, {"name": "Active channels on error n-12 (CRPC)", "group": "History parameters", "area": "holding", "address": 7692, "type": "uint16"}, {"name": "Active channels on error n-13 (CRPD)", "group": "History parameters", "area": "holding", "address": 7693, "type": "uint16"}, {"name": "Active channels on error n-14 (CRPE)", "group": "History parameters", "area": "holding", "address": 7694, "type": "uint16"}, {"name": "Active channels on error n-15 (CRPF)", "group": "History parameters", "area": "holding", "address": 7695, "type": "uint16"}, {"name": "Year, month and day of fault record x (1 is last) (MDA)", "group": "History parameters", "area": "holding", "address": 7700, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MDB)", "group": "History parameters", "area": "holding", "address": 7701, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MDC)", "group": "History parameters", "area": "holding", "address": 7702, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MDD)", "group": "History parameters", "area": "holding", "address": 7703, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MDE)", "group": "History parameters", "area": "holding", "address": 7704, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Year, month and day of fault record x (1 is last) (MDF)", "group": "History parameters", "area": "holding", "address": 7705, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DMA)", "group": "History parameters", "area": "holding", "address": 7710, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DMB)", "group": "History parameters", "area": "holding", "address": 7711, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DMC)", "group": "History parameters", "area": "holding", "address": 7712, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DMD)", "group": "History parameters", "area": "holding", "address": 7713, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DME)", "group": "History parameters", "area": "holding", "address": 7714, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Hour and minute of fault record x (1 is last) (DMF)", "group": "History parameters", "area": "holding", "address": 7715, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Device state (HSA)", "group": "History parameters", "area": "holding", "address": 7720, "type": "uint16"}, {"name": "Device state (HSB)", "group": "History parameters", "area": "holding", "address": 7721, "type": "uint16"}, {"name": "Device state (HSC)", "group": "History parameters", "area": "holding", "address": 7722, "type": "uint16"}, {"name": "Device state (HSD)", "group": "History parameters", "area": "holding", "address": 7723, "type": "uint16"}, {"name": "Device state (HSE)", "group": "History parameters", "area": "holding", "address": 7724, "type": "uint16"}, {"name": "Device state (HSF)", "group": "History parameters", "area": "holding", "address": 7725, "type": "uint16"}, {"name": "Motor torque (OTPA)", "group": "History parameters", "area": "holding", "address": 7730, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTPB)", "group": "History parameters", "area": "holding", "address": 7731, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTPC)", "group": "History parameters", "area": "holding", "address": 7732, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTPD)", "group": "History parameters", "area": "holding", "address": 7733, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTPE)", "group": "History parameters", "area": "holding", "address": 7734, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Motor torque (OTPF)", "group": "History parameters", "area": "holding", "address": 7735, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Drive thermal state (TDPA)", "group": "History parameters", "area": "holding", "address": 7740, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDPB)", "group": "History parameters", "area": "holding", "address": 7741, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDPC)", "group": "History parameters", "area": "holding", "address": 7742, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDPD)", "group": "History parameters", "area": "holding", "address": 7743, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDPE)", "group": "History parameters", "area": "holding", "address": 7744, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "Drive thermal state (TDPF)", "group": "History parameters", "area": "holding", "address": 7745, "type": "uint16", "unit": "%", "description": "Range 0 % ... 255 %"}, {"name": "IGBT junction temp (TJPA)", "group": "History parameters", "area": "holding", "address": 7750, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJPB)", "group": "History parameters", "area": "holding", "address": 7751, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJPC)", "group": "History parameters", "area": "holding", "address": 7752, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJPD)", "group": "History parameters", "area": "holding", "address": 7753, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJPE)", "group": "History parameters", "area": "holding", "address": 7754, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "IGBT junction temp (TJPF)", "group": "History parameters", "area": "holding", "address": 7755, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "Switching frequency (SFPA)", "group": "History parameters", "area": "holding", "address": 7760, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFPB)", "group": "History parameters", "area": "holding", "address": 7761, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFPC)", "group": "History parameters", "area": "holding", "address": 7762, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFPD)", "group": "History parameters", "area": "holding", "address": 7763, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFPE)", "group": "History parameters", "area": "holding", "address": 7764, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Switching frequency (SFPF)", "group": "History parameters", "area": "holding", "address": 7765, "type": "uint16", "unit": "Hz", "description": "Range 0 Hz ... 65535 Hz"}, {"name": "Power Brick error ID (BPI0)", "group": "History parameters", "area": "holding", "address": 7800, "type": "uint16"}, {"name": "Power Brick error ID (BPI1)", "group": "History parameters", "area": "holding", "address": 7801, "type": "uint16"}, {"name": "Power Brick error ID (BPI2)", "group": "History parameters", "area": "holding", "address": 7802, "type": "uint16"}, {"name": "Power Brick error ID (BPI3)", "group": "History parameters", "area": "holding", "address": 7803, "type": "uint16"}, {"name": "Power Brick error ID (BPI4)", "group": "History parameters", "area": "holding", "address": 7804, "type": "uint16"}, {"name": "Power Brick error ID (BPI5)", "group": "History parameters", "area": "holding", "address": 7805, "type": "uint16"}, {"name": "Power Brick error ID (BPI6)", "group": "History parameters", "area": "holding", "address": 7806, "type": "uint16"}, {"name": "Power Brick error ID (BPI7)", "group": "History parameters", "area": "holding", "address": 7807, "type": "uint16"}, {"name": "Power Brick error ID (BPI8)", "group": "History parameters", "area": "holding", "address": 7808, "type": "uint16"}, {"name": "Power Brick error ID (BPI9)", "group": "History parameters", "area": "holding", "address": 7809, "type": "uint16"}, {"name": "Power Brick error ID (BPIA)", "group": "History parameters", "area": "holding", "address": 7810, "type": "uint16"}, {"name": "Power Brick error ID (BPIB)", "group": "History parameters", "area": "holding", "address": 7811, "type": "uint16"}, {"name": "Power Brick error ID (BPIC)", "group": "History parameters", "area": "holding", "address": 7812, "type": "uint16"}, {"name": "Power Brick error ID (BPID)", "group": "History parameters", "area": "holding", "address": 7813, "type": "uint16"}, {"name": "Power Brick error ID (BPIE)", "group": "History parameters", "area": "holding", "address": 7814, "type": "uint16"}, {"name": "Power Brick error ID (BPIF)", "group": "History parameters", "area": "holding", "address": 7815, "type": "uint16"}, {"name": "AFE power brick error ID (BFI0)", "group": "History parameters", "area": "holding", "address": 7820, "type": "uint16"}, {"name": "AFE power brick error ID (BFI1)", "group": "History parameters", "area": "holding", "address": 7821, "type": "uint16"}, {"name": "AFE power brick error ID (BFI2)", "group": "History parameters", "area": "holding", "address": 7822, "type": "uint16"}, {"name": "AFE power brick error ID (BFI3)", "group": "History parameters", "area": "holding", "address": 7823, "type": "uint16"}, {"name": "AFE power brick error ID (BFI4)", "group": "History parameters", "area": "holding", "address": 7824, "type": "uint16"}, {"name": "AFE power brick error ID (BFI5)", "group": "History parameters", "area": "holding", "address": 7825, "type": "uint16"}, {"name": "AFE power brick error ID (BFI6)", "group": "History parameters", "area": "holding", "address": 7826, "type": "uint16"}, {"name": "AFE power brick error ID (BFI7)", "group": "History parameters", "area": "holding", "address": 7827, "type": "uint16"}, {"name": "AFE power brick error ID (BFI8)", "group": "History parameters", "area": "holding", "address": 7828, "type": "uint16"}, {"name": "AFE power brick error ID (BFI9)", "group": "History parameters", "area": "holding", "address": 7829, "type": "uint16"}, {"name": "AFE power brick error ID (BFIA)", "group": "History parameters", "area": "holding", "address": 7830, "type": "uint16"}, {"name": "AFE power brick error ID (BFIB)", "group": "History parameters", "area": "holding", "address": 7831, "type": "uint16"}, {"name": "AFE power brick error ID (BFIC)", "group": "History parameters", "area": "holding", "address": 7832, "type": "uint16"}, {"name": "AFE power brick error ID (BFID)", "group": "History parameters", "area": "holding", "address": 7833, "type": "uint16"}, {"name": "AFE power brick error ID (BFIE)", "group": "History parameters", "area": "holding", "address": 7834, "type": "uint16"}, {"name": "AFE power brick error ID (BFIF)", "group": "History parameters", "area": "holding", "address": 7835, "type": "uint16"}, {"name": "Save configuration (SCS)", "group": "Configuration management", "area": "holding", "address": 8001, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "Save configuration 0", "2": "Save configuration 1", "3": "Save configuration 2", "4": "Config 3"}, "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Restore configuration (FCS)", "group": "Configuration management", "area": "holding", "address": 8002, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "Recall customer parameter set 0", "2": "Recall customer parameter set 1", "3": "Recall customer parameter set 2", "4": "Recall customer parameter set 3", "64": "Recall default parameter set", "71": "Recall OEM default parameter set"}, "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Active configuration (CNFS)", "group": "Status parameters", "area": "holding", "address": 8020, "type": "uint16", "enum": {"0": "In progress", "1": "Configuration 0 active"}}, {"name": "Upload rights (ULR)", "group": "Configuration and settings", "area": "holding", "address": 8041, "type": "uint16", "access": "RW", "enum": {"0": "Upload access allowed", "1": "Upload access not allow"}, "description": "Factory setting [Upload access allowed] ULR0"}, {"name": "Download rights (DLR)", "group": "Configuration and settings", "area": "holding", "address": 8042, "type": "uint16", "access": "RW", "enum": {"0": "Drive Locked", "1": "Drive unlocked", "2": "Download not allowed", "3": "Combined Lock/Unlock"}, "description": "Factory setting [Drive unlocked] DLR1"}, {"name": "Password status (PSST)", "group": "Status parameters", "area": "holding", "address": 8050, "type": "uint16", "enum": {"0": "No password defined", "1": "Password is unlocked", "2": "Password is locked"}}, {"name": "Drive Systems pre-settings status (PSS)", "group": "Configuration management", "area": "holding", "address": 8060, "type": "uint16", "enum": {"0": "Pre-settings not locked", "1": "Pre-settings locked"}}, {"name": "Drive Systems pre-settings unlock (PSRT)", "group": "Configuration and settings", "area": "holding", "address": 8062, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Control mode configuration (CHCF)", "group": "Configuration and settings", "area": "holding", "address": 8401, "type": "uint16", "access": "RW", "enum": {"1": "Combined channel mode", "2": "Separated channel mode", "3": "I/O mode"}, "description": "Writable only when the motor is stopped; Factory setting [Combined channel mode] SIM"}, {"name": "Copy Ch.1-Ch.2 (COP)", "group": "Configuration and settings", "area": "holding", "address": 8402, "type": "uint16", "access": "RW", "enum": {"0": "No copy", "1": "Copy reference frequency", "2": "Copy command", "3": "Copy command & reference frequency"}, "description": "Writable only when the motor is stopped; Factory setting [No copy] NO"}, {"name": "Freq switching assignment (RFC)", "group": "Configuration and settings", "area": "holding", "address": 8411, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Select switching (1 to 1B) (RCB)", "group": "Configuration and settings", "area": "holding", "address": 8412, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Reference frequency channel 1] FR1"}, {"name": "Configuration reference frequency 1 (FR1)", "group": "Configuration and settings", "area": "holding", "address": 8413, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Configuration reference frequency 2 (FR2)", "group": "Configuration and settings", "area": "holding", "address": 8414, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Configuration ref. 1B (FR1B)", "group": "Configuration and settings", "area": "holding", "address": 8415, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Command switching (CCS)", "group": "Configuration and settings", "area": "holding", "address": 8421, "type": "uint16", "access": "RW", "enum": {"0": "Mains or Control Supply ON", "1": "Mains Supply ON", "2": "Drive in running State"}, "description": "Writable only when the motor is stopped; Factory setting [Command channel 1] CD1"}, {"name": "Command channel 1 assign (CD1)", "group": "Configuration and settings", "area": "holding", "address": 8423, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Terminal block] TER"}, {"name": "Command channel 2 assign (CD2)", "group": "Configuration and settings", "area": "holding", "address": 8424, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Modbus communication] MDB"}, {"name": "Dual command channel 1 activation (SCD1)", "group": "Configuration and settings", "area": "holding", "address": 8425, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Inactive] NO"}, {"name": "Dual command channel 2 activation (SCD2)", "group": "Configuration and settings", "area": "holding", "address": 8426, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Inactive] NO"}, {"name": "Forced local assignment (FLO)", "group": "Configuration and settings", "area": "holding", "address": 8431, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Forced Local channel assignment (FLOC)", "group": "Configuration and settings", "area": "holding", "address": 8432, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Time-out forc. local (FLOT)", "group": "Configuration and settings", "area": "holding", "address": 8433, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.1 s ... 30.0 s; Factory setting 10.0 s"}, {"name": "Channel for reference frequency (CRC)", "group": "Status parameters", "area": "holding", "address": 8441, "type": "uint16"}, {"name": "Active command channel (CCC)", "group": "Status parameters", "area": "holding", "address": 8442, "type": "uint16"}, {"name": "Command register (CMD)", "group": "Control parameters", "area": "holding", "address": 8501, "type": "uint16", "access": "RW"}, {"name": "Reference frequency (LFR)", "group": "Setpoint parameters", "area": "holding", "address": 8502, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -5000 ... 5000; Factory setting 0"}, {"name": "PIDSet point (PISP)", "group": "Setpoint parameters", "area": "holding", "address": 8503, "type": "uint16", "access": "RW", "description": "Range 0 ... 1000"}, {"name": "Extended control word (CMI)", "group": "Control parameters", "area": "holding", "address": 8504, "type": "uint16", "access": "RW"}, {"name": "Modbus reference frequency (LFR1)", "group": "Configuration and settings", "area": "holding", "address": 8521, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "CANopen reference frequency (LFR2)", "group": "Configuration and settings", "area": "holding", "address": 8522, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Communication module reference frequency (LFR3)", "group": "Configuration and settings", "area": "holding", "address": 8523, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Embedded ethernet reference frequency (LFR5)", "group": "Configuration and settings", "area": "holding", "address": 8525, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Speed setpoint (LFRD)", "group": "Setpoint parameters", "area": "holding", "address": 8602, "type": "int16", "unit": "rpm", "access": "RW", "description": "Range -32767 rpm ... 32767 rpm; Factory setting 0 rpm"}, {"name": "DRIVECOM : Status word (ETAD)", "group": "Status parameters", "area": "holding", "address": 8603, "type": "uint16"}, {"name": "Output velocity (RFRD)", "group": "Actual values parameters", "area": "holding", "address": 8604, "type": "int16", "unit": "rpm", "description": "Range -32767 rpm ... 32767 rpm"}, {"name": "Speed reference before ramp (FRHD)", "group": "Reference parameters", "area": "holding", "address": 8605, "type": "int16", "unit": "rpm", "description": "Range -32767 rpm ... 32767 rpm"}, {"name": "CiA402 fault code (ERRD)", "group": "Fault parameters", "area": "holding", "address": 8606, "type": "uint16"}, {"name": "Velocity min amount (SMIL)", "group": "CiA 402 settings", "area": "holding", "address": 8607, "type": "uint32", "unit": "rpm", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 rpm ... 65535 rpm"}, {"name": "Velocity max amount (SMAL)", "group": "CiA 402 settings", "area": "holding", "address": 8609, "type": "uint32", "unit": "rpm", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 rpm ... 65535 rpm"}, {"name": "Acceleration delta speed (SPAL)", "group": "CiA 402 settings", "area": "holding", "address": 8611, "type": "uint32", "unit": "rpm", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 1 rpm ... 4294967295 rpm"}, {"name": "Acceleration delta time (SPAT)", "group": "CiA 402 settings", "area": "holding", "address": 8613, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 65535 s"}, {"name": "Deceleration delta speed (SPDL)", "group": "CiA 402 settings", "area": "holding", "address": 8614, "type": "uint32", "unit": "rpm", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 1 rpm ... 4294967295 rpm"}, {"name": "Speed reference after ramp (FROD)", "group": "Reference parameters", "area": "holding", "address": 8641, "type": "int16", "unit": "rpm", "description": "Range -32767 rpm ... 32767 rpm"}, {"name": "Setpoint factor numerator (SPFN)", "group": "CiA 402 settings", "area": "holding", "address": 8642, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32768 ... 32767; Factory setting 1"}, {"name": "Setpoint factor denominator (SPFD)", "group": "CiA 402 settings", "area": "holding", "address": 8643, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32768 ... 32767; Factory setting 1"}, {"name": "Quick stop option code (QSTD)", "group": "CiA 402 settings", "area": "holding", "address": 8651, "type": "uint16", "access": "RW", "enum": {"2": "Fast stop then disable voltage", "6": "Fast stop then stay in quick stop state"}, "description": "Writable only when the motor is stopped; Factory setting [Fast stop then disable voltage] FST2"}, {"name": "Type of switchOn Disable Stop (DOTD)", "group": "CiA 402 settings", "area": "holding", "address": 8652, "type": "uint16", "access": "RW", "enum": {"0": "Drive freewheel stop", "1": "Ramp stop"}, "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "Acceleration ramp time (ACC)", "group": "Configuration and settings", "area": "holding", "address": 9001, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 9999; Factory setting 100"}, {"name": "Deceleration ramp time (DEC)", "group": "Configuration and settings", "area": "holding", "address": 9002, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 9999; Factory setting 100"}, {"name": "Decel ramp adaptation (BRA)", "group": "Configuration and settings", "area": "holding", "address": 9003, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "Yes", "2": "High torque"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Type of ramp (RPT)", "group": "Configuration and settings", "area": "holding", "address": 9004, "type": "uint16", "access": "RW", "enum": {"0": "Linear ramp", "1": "S-Ramp", "2": "U-Ramp", "3": "Ramp customized"}, "description": "Factory setting Refer to programming manual"}, {"name": "Start ACC ramp rounding (TA1)", "group": "Configuration and settings", "area": "holding", "address": 9005, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting Refer to programming manual"}, {"name": "End ACC ramp rounding (TA2)", "group": "Configuration and settings", "area": "holding", "address": 9006, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting Refer to programming manual"}, {"name": "Start DEC ramp rounding (TA3)", "group": "Configuration and settings", "area": "holding", "address": 9007, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting Refer to programming manual"}, {"name": "End DEC ramp rounding (TA4)", "group": "Configuration and settings", "area": "holding", "address": 9008, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting Refer to programming manual"}, {"name": "Ramp switching assignment (RPS)", "group": "Configuration and settings", "area": "holding", "address": 9010, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Ramp 2 frequency threshold (FRT)", "group": "Configuration and settings", "area": "holding", "address": 9011, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Acceleration 2 ramp time (AC2)", "group": "Configuration and settings", "area": "holding", "address": 9012, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 1 ... 9999; Factory setting 50"}, {"name": "Deceleration 2 (DE2)", "group": "Configuration and settings", "area": "holding", "address": 9013, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 1 ... 9999; Factory setting 50"}, {"name": "Ramp increment (INR)", "group": "Configuration and settings", "area": "holding", "address": 9020, "type": "uint16", "access": "RW", "enum": {"0": "hundredths of seconds", "1": "Tenths of seconds", "2": "seconds"}, "description": "Factory setting [Tenths of seconds] 01"}, {"name": "Frequency reference after ramp (FRO)", "group": "Reference parameters", "area": "holding", "address": 9021, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Profidrive profile - RFG Tolerance parameter (PTR)", "group": "Configuration and settings", "area": "holding", "address": 9024, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 10 %"}, {"name": "Profidrive profile - RFG Tmax parameter (PTM)", "group": "Configuration and settings", "area": "holding", "address": 9025, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 9999; Factory setting 100"}, {"name": "Acceleration on Start (ACCS)", "group": "Configuration and settings", "area": "holding", "address": 9040, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 9999; Factory setting 0"}, {"name": "Deceleration while check valve is closing (Smooth) (DECV)", "group": "Configuration and settings", "area": "holding", "address": 9041, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 9999; Factory setting 0"}, {"name": "Speed level from which check-valve ramp is used (CVHS)", "group": "Configuration and settings", "area": "holding", "address": 9042, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 599.0 Hz; Factory setting 0.0 Hz"}, {"name": "Speed level up to which check-valve ramp is used (CVLS)", "group": "Configuration and settings", "area": "holding", "address": 9043, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 599.0 Hz; Factory setting 0.0 Hz"}, {"name": "Deceleration on Stop (DECS)", "group": "Configuration and settings", "area": "holding", "address": 9044, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 9999; Factory setting 0"}, {"name": "Speed proportional gain (SPG)", "group": "Configuration and settings", "area": "holding", "address": 9103, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 1000 %; Factory setting 40 %"}, {"name": "Speed time integral (SIT)", "group": "Configuration and settings", "area": "holding", "address": 9104, "type": "uint16", "unit": "ms", "access": "RW", "description": "Range 1 ms ... 65535 ms; Factory setting Refer to programming manual"}, {"name": "K speed loop filter (SFC)", "group": "Configuration and settings", "area": "holding", "address": 9105, "type": "uint16", "access": "RW", "description": "Range 0 ... 100; Factory setting Refer to programming manual"}, {"name": "Speed loop type (SSL)", "group": "Configuration and settings", "area": "holding", "address": 9106, "type": "uint16", "access": "RW", "enum": {"0": "Standard", "1": "High performance"}, "description": "Writable only when the motor is stopped; Factory setting [Standard] STD"}, {"name": "Estimated application inertia (JEST)", "group": "Configuration and settings", "area": "holding", "address": 9107, "type": "uint16", "description": "Unit: Refer to programming manual; Range 0 ... 65535"}, {"name": "Application Inertia (JAPL)", "group": "Configuration and settings", "area": "holding", "address": 9108, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Inertia Multiplying Coefficient (JMUL)", "group": "Configuration and settings", "area": "holding", "address": 9109, "type": "uint16", "scale": 0.1, "unit": "g.m²", "description": "Range 0.0 g.m² ... 6553.5 g.m²"}, {"name": "Feed forward value (FFP)", "group": "Configuration and settings", "area": "holding", "address": 9110, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 200 %; Factory setting 0 %"}, {"name": "Feed forward bandwidth (FFV)", "group": "Configuration and settings", "area": "holding", "address": 9111, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 20 % ... 500 %; Factory setting 100 %"}, {"name": "Inertia Coefficient of the application (JACO)", "group": "Configuration and settings", "area": "holding", "address": 9112, "type": "uint16", "scale": 0.01, "access": "RW", "description": "Writable only when the motor is stopped; Range 0.10 ... 100.00; Factory setting 1.00"}, {"name": "Filter time of the estimated speed (FFH)", "group": "Configuration and settings", "area": "holding", "address": 9115, "type": "uint16", "scale": 0.1, "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 ms ... 100.0 ms; Factory setting Refer to programming manual"}, {"name": "Filter time of the current (CRTF)", "group": "Configuration and settings", "area": "holding", "address": 9116, "type": "uint16", "scale": 0.1, "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 ms ... 100.0 ms; Factory setting 0.0 ms"}, {"name": "Internal currents filter time (CRFA)", "group": "Configuration and settings", "area": "holding", "address": 9118, "type": "uint16", "scale": 0.1, "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 ms ... 100.0 ms"}, {"name": "External feed forward assignment (TEFF)", "group": "Configuration and settings", "area": "holding", "address": 9130, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Current limitation (CLI)", "group": "Configuration and settings", "area": "holding", "address": 9201, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting Refer to programming manual"}, {"name": "Torque limit. activation (TLA)", "group": "Configuration and settings", "area": "holding", "address": 9210, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Maximum power in motor mode (TPMM)", "group": "Configuration and settings", "area": "holding", "address": 9216, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 10 % ... 300 %; Factory setting 300 %"}, {"name": "Maximum power in generator mode (TPMG)", "group": "Configuration and settings", "area": "holding", "address": 9217, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 10 % ... 300 %; Factory setting 300 %"}, {"name": "Stall monitoring activation (STPC)", "group": "Configuration and settings", "area": "holding", "address": 9270, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Motor stall max time (STP1)", "group": "Configuration and settings", "area": "holding", "address": 9271, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 200.0 s; Factory setting 60.0 s"}, {"name": "Stall monitoring current level (STP2)", "group": "Configuration and settings", "area": "holding", "address": 9272, "type": "int16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 150.0 %; Factory setting 150.0 %"}, {"name": "Stall monitoring frequency level (STP3)", "group": "Configuration and settings", "area": "holding", "address": 9273, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 2.0 Hz"}, {"name": "Nominal motor voltage (UNS)", "group": "Configuration and settings", "area": "holding", "address": 9601, "type": "uint16", "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 100 V ... 690 V; Factory setting Refer to programming manual"}, {"name": "Nominal motor frequency (FRS)", "group": "Configuration and settings", "area": "holding", "address": 9602, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 40.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Nominal motor current (NCR)", "group": "Configuration and settings", "area": "holding", "address": 9603, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting Refer to programming manual"}, {"name": "Nominal motor speed (NSP)", "group": "Configuration and settings", "area": "holding", "address": 9604, "type": "uint16", "unit": "rpm", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 rpm ... 65535 rpm; Factory setting Refer to programming manual"}, {"name": "Motor 1 Cosinus Phi (COS)", "group": "Configuration and settings", "area": "holding", "address": 9606, "type": "uint16", "scale": 0.01, "access": "RW", "description": "Writable only when the motor is stopped; Range 0.50 ... 1.00; Factory setting Refer to programming manual"}, {"name": "Motor control type (CTT)", "group": "Configuration and settings", "area": "holding", "address": 9607, "type": "uint16", "access": "RW", "enum": {"3": "U/F VC Standard motor law", "4": "U/F VC 5 point voltage/frequency", "6": "U/F VC Quadratic", "10": "SYN_U VC law", "11": "U/F VC Energy Sav.", "12": "Reluctance motor"}, "description": "Writable only when the motor is stopped; Factory setting [U/F VC Quadratic] UFQ"}, {"name": "Autotuning (TUN)", "group": "Configuration and settings", "area": "holding", "address": 9608, "type": "uint16", "access": "RW", "description": "Factory setting [No action] NO"}, {"name": "Autotuning status (TUS)", "group": "Configuration and settings", "area": "holding", "address": 9609, "type": "uint16", "description": "Factory setting [Not done] TAB"}, {"name": "Autotuning input assignment (TUL)", "group": "Configuration and settings", "area": "holding", "address": 9610, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Output Phase Loss assignment (OPL)", "group": "Configuration and settings", "area": "holding", "address": 9611, "type": "uint16", "access": "RW", "enum": {"0": "Function inactive", "1": "OPF error Triggered", "2": "No error triggered"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Motor thermal monitoring mode (THT)", "group": "Configuration and settings", "area": "holding", "address": 9612, "type": "uint16", "access": "RW", "enum": {"0": "No thermal monitoring", "1": "Self cooled motor", "2": "Force cooled motor"}, "description": "Writable only when the motor is stopped; Factory setting [Self cooled motor] ACL"}, {"name": "Nominal motor power (NPR)", "group": "Configuration and settings", "area": "holding", "address": 9613, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting Refer to programming manual"}, {"name": "Motor parameter choice (MPC)", "group": "Configuration and settings", "area": "holding", "address": 9614, "type": "uint16", "access": "RW", "enum": {"0": "Nominal motor power", "1": "Nominal motor cosinus Phi"}, "description": "Writable only when the motor is stopped; Factory setting [Nominal motor power] NPR"}, {"name": "Automatic autotune (AUT)", "group": "Configuration and settings", "area": "holding", "address": 9615, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "Yes", "2": "At first run order"}, "description": "Factory setting Refer to programming manual"}, {"name": "Tune selection (STUN)", "group": "Status parameters", "area": "holding", "address": 9617, "type": "uint16", "enum": {"0": "Default", "1": "Measure", "2": "Custom"}, "description": "Factory setting [Default] TAB"}, {"name": "Number of pairs of poles calculated (PPN)", "group": "Configuration and settings", "area": "holding", "address": 9618, "type": "uint16", "description": "Range 1 ... 100; Factory setting Refer to programming manual"}, {"name": "Autotuning usage (TUNU)", "group": "Configuration and settings", "area": "holding", "address": 9619, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "Use the motor thermal evolution"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Frequency loop gain (FLG)", "group": "Configuration and settings", "area": "holding", "address": 9620, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 20 %"}, {"name": "Frequency loop stability (STA)", "group": "Configuration and settings", "area": "holding", "address": 9621, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 20 %"}, {"name": "Motor Thermal current (ITH)", "group": "Configuration and settings", "area": "holding", "address": 9622, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting Refer to programming manual"}, {"name": "IR compensation (UFR)", "group": "Configuration and settings", "area": "holding", "address": 9623, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 200 %; Factory setting 100 %"}, {"name": "U/F Profile (PFL)", "group": "Configuration and settings", "area": "holding", "address": 9624, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 30 %"}, {"name": "Slip Compensation (SLP)", "group": "Configuration and settings", "area": "holding", "address": 9625, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 300 %; Factory setting Refer to programming manual"}, {"name": "Autotuning type (TUNT)", "group": "Configuration and settings", "area": "holding", "address": 9626, "type": "uint16", "access": "RW", "enum": {"2": "Standard", "3": "Rotation"}, "description": "Writable only when the motor is stopped; Factory setting [Standard] STD"}, {"name": "Level of current for autotuning (TCR)", "group": "Configuration and settings", "area": "holding", "address": 9627, "type": "uint16", "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 % ... 300 %; Factory setting 0 %"}, {"name": "Inertia factor (SPGU)", "group": "Configuration and settings", "area": "holding", "address": 9629, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 1000 %; Factory setting 40 %"}, {"name": "Motor thermal state (THR)", "group": "Measurement parameters", "area": "holding", "address": 9630, "type": "uint16", "unit": "%", "description": "Range 0 % ... 200 %"}, {"name": "Slip compensation in generator mode (SLPC)", "group": "Configuration and settings", "area": "holding", "address": 9638, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Yes] YES"}, {"name": "AsyncMotor Stator resistance (RSA)", "group": "Configuration and settings", "area": "holding", "address": 9642, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Status of motor tune in term of saliency (SMOT)", "group": "Status parameters", "area": "holding", "address": 9645, "type": "uint16", "enum": {"0": "No information", "1": "Low saliency", "2": "Medium saliency", "3": "High saliency"}}, {"name": "Nominal Mechanical Power (NMP)", "group": "Configuration and settings", "area": "holding", "address": 9647, "type": "uint16", "description": "Unit: Refer to programming manual; Range 1 ... 65535"}, {"name": "Magnetizing current (IDA)", "group": "Configuration and settings", "area": "holding", "address": 9652, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "AsyncMotor Leakage inductance (LFA)", "group": "Configuration and settings", "area": "holding", "address": 9662, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Rotor time constant (TRA)", "group": "Configuration and settings", "area": "holding", "address": 9667, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Computed nominal motor torque (TQN)", "group": "Actual values parameters", "area": "holding", "address": 9669, "type": "uint16", "description": "Unit: Refer to programming manual; Range 1 ... 65535; Factory setting 499"}, {"name": "Sync motor nominal current (NCRS)", "group": "Configuration and settings", "area": "holding", "address": 9670, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting Refer to programming manual"}, {"name": "Nominal synchronous motor speed (NSPS)", "group": "Configuration and settings", "area": "holding", "address": 9671, "type": "uint16", "unit": "rpm", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 rpm ... 65535 rpm; Factory setting Refer to programming manual"}, {"name": "Pole pairs number (sync) (PPNS)", "group": "Configuration and settings", "area": "holding", "address": 9672, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 1 ... 240; Factory setting Refer to programming manual"}, {"name": "Sync. EMF constant (PHS)", "group": "Configuration and settings", "area": "holding", "address": 9673, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Sync motor d inductance (LDS)", "group": "Configuration and settings", "area": "holding", "address": 9674, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Sync motor q inductance (LQS)", "group": "Configuration and settings", "area": "holding", "address": 9675, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Relative d-axis error in % (RDAE)", "group": "Actual values parameters", "area": "holding", "address": 9676, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Synchronous motor nominal freq (FRSS)", "group": "Configuration and settings", "area": "holding", "address": 9679, "type": "uint16", "scale": 0.1, "unit": "Hz", "description": "Range 10.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Calculated SyncMotor Stator R (RSAS)", "group": "Configuration and settings", "area": "holding", "address": 9682, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Nominal motor torque (TQS)", "group": "Configuration and settings", "area": "holding", "address": 9684, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 1 ... 65535; Factory setting Refer to programming manual"}, {"name": "Nominal motor torque scaling (TQNC)", "group": "Configuration and settings", "area": "holding", "address": 9687, "type": "uint16", "access": "RW", "enum": {"0": "Expert", "1": "Nameplate"}, "description": "Writable only when the motor is stopped; Factory setting [Expert] OPTI"}, {"name": "Expert nominal motor torque (TQNO)", "group": "Status parameters", "area": "holding", "address": 9688, "type": "uint16", "description": "Unit: Refer to programming manual; Range 0 ... 65535"}, {"name": "Nameplate nominal motor torque (TQNP)", "group": "Status parameters", "area": "holding", "address": 9689, "type": "uint16", "description": "Unit: Refer to programming manual; Range 0 ... 65535"}, {"name": "PHS scaling (IPHS)", "group": "Configuration and settings", "area": "holding", "address": 9698, "type": "uint16", "access": "RW", "enum": {"1": "0.1 mV/rpm", "2": "1 mV/rpm"}, "description": "Writable only when the motor is stopped; Factory setting [0.1 mV/rpm] 01"}, {"name": "NCR current scaling (INRC)", "group": "Configuration and settings", "area": "holding", "address": 9801, "type": "uint16"}, {"name": "NPR power scaling (INRP)", "group": "Configuration and settings", "area": "holding", "address": 9802, "type": "uint16"}, {"name": "RSA resistance scaling (INRR)", "group": "Configuration and settings", "area": "holding", "address": 9803, "type": "uint16"}, {"name": "LFA inductance scaling (INRL)", "group": "Configuration and settings", "area": "holding", "address": 9804, "type": "uint16"}, {"name": "Torque scaling (INRT)", "group": "Configuration and settings", "area": "holding", "address": 9805, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "TRA time scaling (INTI)", "group": "Configuration and settings", "area": "holding", "address": 9806, "type": "uint16"}, {"name": "Ld inductance for magnetic saturation curve SynRM Law (Point 1) (LD1)", "group": "Configuration and settings", "area": "holding", "address": 9808, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting 0"}, {"name": "Ld inductance for magnetic saturation curve SynRM Law (Point 2) (LD2)", "group": "Configuration and settings", "area": "holding", "address": 9810, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting 0"}, {"name": "Ld inductance for magnetic saturation curve SynRM Law (Point 3) (LD3)", "group": "Configuration and settings", "area": "holding", "address": 9812, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting 0"}, {"name": "Ld inductance for magnetic saturation curve SynRM Law (Point 4) (LD4)", "group": "Configuration and settings", "area": "holding", "address": 9814, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting 0"}, {"name": "Ld inductance for magnetic saturation curve SynRM Law (Point 5) (LD5)", "group": "Configuration and settings", "area": "holding", "address": 9816, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting 0"}, {"name": "Id Current magnetic saturation curve for SynRM Law (Point 1) (ID1)", "group": "Configuration and settings", "area": "holding", "address": 9818, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Id Current magnetic saturation curve for SynRM Law (Point 2) (ID2)", "group": "Configuration and settings", "area": "holding", "address": 9820, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Id Current magnetic saturation curve for SynRM Law (Point 3) (ID3)", "group": "Configuration and settings", "area": "holding", "address": 9822, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Id Current magnetic saturation curve for SynRM Law (Point 4) (ID4)", "group": "Configuration and settings", "area": "holding", "address": 9824, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Id Current magnetic saturation curve for SynRM Law (Point 5) (ID5)", "group": "Configuration and settings", "area": "holding", "address": 9826, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Start standstill tune (ENPT)", "group": "Status parameters", "area": "holding", "address": 9830, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Yes] YES"}, {"name": "Rotation tune enable (TUNR)", "group": "Configuration and settings", "area": "holding", "address": 9832, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No action] NO"}, {"name": "Rotation tune selection (STUR)", "group": "Status parameters", "area": "holding", "address": 9833, "type": "uint16", "description": "Factory setting [Default] TAB"}, {"name": "Rotation tune status (TURS)", "group": "Configuration and settings", "area": "holding", "address": 9834, "type": "uint16", "description": "Factory setting [Not done] TAB"}, {"name": "First Id min current level in rotation (IDL1)", "group": "Configuration and settings", "area": "holding", "address": 9836, "type": "uint16", "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 % ... 300 %; Factory setting Refer to programming manual"}, {"name": "First Id max current level in rotation (IDH1)", "group": "Configuration and settings", "area": "holding", "address": 9837, "type": "uint16", "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 % ... 300 %; Factory setting 100 %"}, {"name": "Rotation tune reference frequency (TLFR)", "group": "Configuration and settings", "area": "holding", "address": 9850, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Rotation tune status PMSM (TRS2)", "group": "Configuration and settings", "area": "holding", "address": 9897, "type": "uint16"}, {"name": "Rotation tune status SynRm (TRS3)", "group": "Configuration and settings", "area": "holding", "address": 9899, "type": "uint16"}, {"name": "Automatic DC injection (ADC)", "group": "Configuration and settings", "area": "holding", "address": 10401, "type": "uint16", "access": "RW", "enum": {"0": "No DC injection", "1": "DC injection", "2": "Continuous DC injection"}, "description": "Factory setting [No DC injection] NO"}, {"name": "Auto DC injection time 1 (TDC1)", "group": "Configuration and settings", "area": "holding", "address": 10402, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.1 s ... 30.0 s; Factory setting 0.5 s"}, {"name": "Auto DC injection level 1 (SDC1)", "group": "Configuration and settings", "area": "holding", "address": 10403, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting Refer to programming manual"}, {"name": "Auto DC injection time 2 (TDC2)", "group": "Configuration and settings", "area": "holding", "address": 10404, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 30.0 s; Factory setting 0.0 s"}, {"name": "Auto DC injection level 2 (SDC2)", "group": "Configuration and settings", "area": "holding", "address": 10405, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting Refer to programming manual"}, {"name": "DC injection angle (TAFI)", "group": "Configuration and settings", "area": "holding", "address": 10499, "type": "uint16", "unit": "°", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ° ... 360 °; Factory setting 0 °"}, {"name": "Motor energy consumption (Wh) (ME0)", "group": "Actual values parameters", "area": "holding", "address": 10601, "type": "uint16", "unit": "Wh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 Wh ... 999 Wh"}, {"name": "Motor energy consumption (kWh) (ME1)", "group": "Actual values parameters", "area": "holding", "address": 10602, "type": "uint16", "unit": "kWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 kWh ... 999 kWh"}, {"name": "Motor energy consumption (MWh) (ME2)", "group": "Actual values parameters", "area": "holding", "address": 10603, "type": "uint16", "unit": "MWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 MWh ... 999 MWh"}, {"name": "Motor energy consumption (GWh) (ME3)", "group": "Actual values parameters", "area": "holding", "address": 10604, "type": "uint16", "unit": "GWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 GWh ... 999 GWh"}, {"name": "Motor energy consumption (TWh) (ME4)", "group": "Actual values parameters", "area": "holding", "address": 10605, "type": "uint16", "unit": "TWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 TWh ... 999 TWh"}, {"name": "Electrical energy consumed by the motor (Wh) (OC0)", "group": "Actual values parameters", "area": "holding", "address": 10606, "type": "uint16", "unit": "Wh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 Wh ... 999 Wh"}, {"name": "Electrical energy consumed by the motor (KWh) (OC1)", "group": "Actual values parameters", "area": "holding", "address": 10607, "type": "uint16", "unit": "kWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 kWh ... 999 kWh"}, {"name": "Electrical energy consumed by the motor (MWh) (OC2)", "group": "Actual values parameters", "area": "holding", "address": 10608, "type": "uint16", "unit": "MWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 MWh ... 999 MWh"}, {"name": "Electrical energy consumed by the motor (GWh) (OC3)", "group": "Actual values parameters", "area": "holding", "address": 10609, "type": "uint16", "unit": "GWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 GWh ... 999 GWh"}, {"name": "Electrical energy consumed by the motor (TWh) (OC4)", "group": "Actual values parameters", "area": "holding", "address": 10610, "type": "uint16", "unit": "TWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 TWh ... 999 TWh"}, {"name": "Electrical energy produced by the motor (Wh) (OP0)", "group": "Actual values parameters", "area": "holding", "address": 10611, "type": "uint16", "unit": "Wh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 Wh ... 999 Wh"}, {"name": "Electrical energy produced by the motor (KWh) (OP1)", "group": "Actual values parameters", "area": "holding", "address": 10612, "type": "uint16", "unit": "kWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 kWh ... 999 kWh"}, {"name": "Electrical energy produced by the motor (MWh) (OP2)", "group": "Actual values parameters", "area": "holding", "address": 10613, "type": "uint16", "unit": "MWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 MWh ... 999 MWh"}, {"name": "Electrical energy produced by the motor (GWh) (OP3)", "group": "Actual values parameters", "area": "holding", "address": 10614, "type": "uint16", "unit": "GWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 GWh ... 999 GWh"}, {"name": "Electrical energy produced by the motor (TWh) (OP4)", "group": "Actual values parameters", "area": "holding", "address": 10615, "type": "uint16", "unit": "TWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 TWh ... 999 TWh"}, {"name": "Real energy consumption (Wh) (OE0)", "group": "Actual values parameters", "area": "holding", "address": 10616, "type": "int16", "unit": "Wh", "access": "RW", "description": "Writable only when the motor is stopped; Range -999 Wh ... 999 Wh"}, {"name": "Real energy consumption (kWh) (OE1)", "group": "Actual values parameters", "area": "holding", "address": 10617, "type": "int16", "unit": "kWh", "access": "RW", "description": "Writable only when the motor is stopped; Range -999 kWh ... 999 kWh"}, {"name": "Real energy consumption (MWh) (OE2)", "group": "Actual values parameters", "area": "holding", "address": 10618, "type": "int16", "unit": "MWh", "access": "RW", "description": "Writable only when the motor is stopped; Range -999 MWh ... 999 MWh"}, {"name": "Real energy consumption (GWh) (OE3)", "group": "Actual values parameters", "area": "holding", "address": 10619, "type": "int16", "unit": "GWh", "access": "RW", "description": "Writable only when the motor is stopped; Range -999 GWh ... 999 GWh"}, {"name": "Real energy consumption (TWh) (OE4)", "group": "Actual values parameters", "area": "holding", "address": 10620, "type": "int16", "unit": "TWh", "access": "RW", "description": "Writable only when the motor is stopped; Range -999 TWh ... 999 TWh"}, {"name": "Electrical energy consumed TODAY by the motor (KWh) (OCT)", "group": "Actual values parameters", "area": "holding", "address": 10622, "type": "uint32", "unit": "kWh", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 kWh ... 4294967295 kWh"}, {"name": "Electrical energy consumed YESTERDAY by the motor (KWh) (OCY)", "group": "Actual values parameters", "area": "holding", "address": 10624, "type": "uint32", "unit": "kWh", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 kWh ... 4294967295 kWh"}, {"name": "Input Energy (Wh) (IC0)", "group": "Actual values parameters", "area": "holding", "address": 10626, "type": "uint16", "unit": "Wh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 Wh ... 999 Wh"}, {"name": "Input Energy (kWh) (IC1)", "group": "Actual values parameters", "area": "holding", "address": 10627, "type": "uint16", "unit": "kWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 kWh ... 999 kWh"}, {"name": "Input Energy (MWh) (IC2)", "group": "Actual values parameters", "area": "holding", "address": 10628, "type": "uint16", "unit": "MWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 MWh ... 999 MWh"}, {"name": "Input Energy (GWh) (IC3)", "group": "Actual values parameters", "area": "holding", "address": 10629, "type": "uint16", "unit": "GWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 GWh ... 999 GWh"}, {"name": "Input Energy (TWh) (IC4)", "group": "Actual values parameters", "area": "holding", "address": 10630, "type": "uint16", "unit": "TWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 TWh ... 999 TWh"}, {"name": "Real input Energy (Wh) (IE0)", "group": "Actual values parameters", "area": "holding", "address": 10636, "type": "int16", "unit": "Wh", "access": "RW", "description": "Writable only when the motor is stopped; Range -999 Wh ... 999 Wh"}, {"name": "Real input Energy (kWh) (IE1)", "group": "Actual values parameters", "area": "holding", "address": 10637, "type": "int16", "unit": "kWh", "access": "RW", "description": "Writable only when the motor is stopped; Range -999 kWh ... 999 kWh"}, {"name": "Real input Energy (MWh) (IE2)", "group": "Actual values parameters", "area": "holding", "address": 10638, "type": "int16", "unit": "MWh", "access": "RW", "description": "Writable only when the motor is stopped; Range -999 MWh ... 999 MWh"}, {"name": "Real input Energy (GWh) (IE3)", "group": "Actual values parameters", "area": "holding", "address": 10639, "type": "int16", "unit": "GWh", "access": "RW", "description": "Writable only when the motor is stopped; Range -999 GWh ... 999 GWh"}, {"name": "Real input Energy (TWh) (IE4)", "group": "Actual values parameters", "area": "holding", "address": 10640, "type": "int16", "unit": "TWh", "access": "RW", "description": "Writable only when the motor is stopped; Range -999 TWh ... 999 TWh"}, {"name": "Peak electrical output power (MOEP)", "group": "Status parameters", "area": "holding", "address": 10641, "type": "uint16", "description": "Unit: Refer to programming manual; Range 0 ... 65535"}, {"name": "Reference power without drive (PREF)", "group": "Configuration and settings", "area": "holding", "address": 10800, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "kWh Cost (ECST)", "group": "Configuration and settings", "area": "holding", "address": 10801, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "CO2 ratio (ECO2)", "group": "Configuration and settings", "area": "holding", "address": 10802, "type": "uint16", "scale": 0.001, "unit": "kg/kWh", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.000 kg/kWh ... 65.535 kg/kWh; Factory setting 0.000 kg/kWh"}, {"name": "Energy Saved (ESAV)", "group": "Actual values parameters", "area": "holding", "address": 10804, "type": "uint32", "unit": "kWh", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 kWh ... 4294967295 kWh"}, {"name": "Money saved (CASH)", "group": "Actual values parameters", "area": "holding", "address": 10806, "type": "uint32", "description": "32-bit: the source does not state the word order (high word first assumed); Unit: Refer to programming manual; Range 0 ... 4294967295"}, {"name": "Co2 Saved (CO2S)", "group": "Actual values parameters", "area": "holding", "address": 10808, "type": "uint32", "scale": 0.1, "unit": "t", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0.0 t ... 429496729.5 t"}, {"name": "Over-consumption threshold (PCAH)", "group": "Configuration and settings", "area": "holding", "address": 10850, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 % ... 200.0 %; Factory setting 0.0 %"}, {"name": "Under-consumption threshold (PCAL)", "group": "Configuration and settings", "area": "holding", "address": 10851, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Over/Under-consumption time delay (PCAT)", "group": "Configuration and settings", "area": "holding", "address": 10852, "type": "uint16", "unit": "min", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 min ... 60 min; Factory setting 1 min"}, {"name": "High current threshold (CTD)", "group": "Configuration and settings", "area": "holding", "address": 11001, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting Refer to programming manual"}, {"name": "Motor thermal threshold (TTD)", "group": "Configuration and settings", "area": "holding", "address": 11002, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 118 %; Factory setting 100 %"}, {"name": "Motor frequency threshold (FTD)", "group": "Configuration and settings", "area": "holding", "address": 11003, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Frequency threshold 2 (F2D)", "group": "Configuration and settings", "area": "holding", "address": 11004, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Device thermal state warning (THA)", "group": "Configuration and settings", "area": "holding", "address": 11009, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 118 %; Factory setting 100 %"}, {"name": "Low current threshold (CTDL)", "group": "Configuration and settings", "area": "holding", "address": 11010, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting 0"}, {"name": "Low Freq. threshold (FTDL)", "group": "Configuration and settings", "area": "holding", "address": 11011, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "2 frequency threshold (F2DL)", "group": "Configuration and settings", "area": "holding", "address": 11012, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Reference high threshold (RTD)", "group": "Configuration and settings", "area": "holding", "address": 11013, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Reference low threshold (RTDL)", "group": "Configuration and settings", "area": "holding", "address": 11014, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Low torque threshold (TTL)", "group": "Configuration and settings", "area": "holding", "address": 11015, "type": "int16", "unit": "%", "access": "RW", "description": "Range -300 % ... 300 %; Factory setting 50 %"}, {"name": "High torque threshold (TTH)", "group": "Configuration and settings", "area": "holding", "address": 11016, "type": "int16", "unit": "%", "access": "RW", "description": "Range -300 % ... 300 %; Factory setting 100 %"}, {"name": "2/3-wire control (TCC)", "group": "Configuration and settings", "area": "holding", "address": 11101, "type": "uint16", "access": "RW", "enum": {"0": "2-wire control", "1": "3-wire control"}, "description": "Writable only when the motor is stopped; Factory setting [2-wire control] 2C"}, {"name": "Type of 2-wire control (TCT)", "group": "Configuration and settings", "area": "holding", "address": 11102, "type": "uint16", "access": "RW", "enum": {"0": "Level", "1": "Transition", "2": "Level with forward priority"}, "description": "Writable only when the motor is stopped; Factory setting [Transition] TRN"}, {"name": "Reverse assignment (RRS)", "group": "Configuration and settings", "area": "holding", "address": 11105, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Type of stop (STT)", "group": "Configuration and settings", "area": "holding", "address": 11201, "type": "uint16", "access": "RW", "enum": {"0": "On ramp", "1": "Fast stop", "2": "Freewheel stop", "3": "DC injection"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Freewheel stop (NST)", "group": "Configuration and settings", "area": "holding", "address": 11202, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "DC injection assignment (DCI)", "group": "Configuration and settings", "area": "holding", "address": 11203, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Fast stop assignment (FST)", "group": "Configuration and settings", "area": "holding", "address": 11204, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "DC injection level 1 (IDC)", "group": "Configuration and settings", "area": "holding", "address": 11210, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting Refer to programming manual"}, {"name": "DC injection time 2 (TDC)", "group": "Configuration and settings", "area": "holding", "address": 11211, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.1 s ... 30.0 s; Factory setting 0.5 s"}, {"name": "DC injection level 2 (IDC2)", "group": "Configuration and settings", "area": "holding", "address": 11212, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting Refer to programming manual"}, {"name": "DC injection time 1 (TDI)", "group": "Configuration and settings", "area": "holding", "address": 11213, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.1 s ... 30.0 s; Factory setting 0.5 s"}, {"name": "Freewheel stop threshold (FFT)", "group": "Configuration and settings", "area": "holding", "address": 11220, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.2 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Fast Stop ramp Divider (DCF)", "group": "Configuration and settings", "area": "holding", "address": 11230, "type": "uint16", "access": "RW", "description": "Range 0 ... 10; Factory setting 4"}, {"name": "Skip frequency (JPF)", "group": "Configuration and settings", "area": "holding", "address": 11301, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Skip frequency 2 (JF2)", "group": "Configuration and settings", "area": "holding", "address": 11302, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "3rd Skip frequency (JF3)", "group": "Configuration and settings", "area": "holding", "address": 11303, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Skip Freq. hysteresis (JFH)", "group": "Configuration and settings", "area": "holding", "address": 11311, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.1 Hz ... 10.0 Hz; Factory setting 1.0 Hz"}, {"name": "2 Preset Freq assignment (PS2)", "group": "Configuration and settings", "area": "holding", "address": 11401, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "4 Preset Freq assignment (PS4)", "group": "Configuration and settings", "area": "holding", "address": 11402, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "8 Preset Freq assignment (PS8)", "group": "Configuration and settings", "area": "holding", "address": 11403, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "16 Preset Freq assignment (PS16)", "group": "Configuration and settings", "area": "holding", "address": 11404, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Preset speed 2 (SP2)", "group": "Configuration and settings", "area": "holding", "address": 11410, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 10.0 Hz"}, {"name": "Preset speed 3 (SP3)", "group": "Configuration and settings", "area": "holding", "address": 11411, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 15.0 Hz"}, {"name": "Preset speed 4 (SP4)", "group": "Configuration and settings", "area": "holding", "address": 11412, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 20.0 Hz"}, {"name": "Preset speed 5 (SP5)", "group": "Configuration and settings", "area": "holding", "address": 11413, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 25.0 Hz"}, {"name": "Preset speed 6 (SP6)", "group": "Configuration and settings", "area": "holding", "address": 11414, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 30.0 Hz"}, {"name": "Preset speed 7 (SP7)", "group": "Configuration and settings", "area": "holding", "address": 11415, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 35.0 Hz"}, {"name": "Preset speed 8 (SP8)", "group": "Configuration and settings", "area": "holding", "address": 11416, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 40.0 Hz"}, {"name": "Preset speed 9 (SP9)", "group": "Configuration and settings", "area": "holding", "address": 11417, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 45.0 Hz"}, {"name": "Preset speed 10 (SP10)", "group": "Configuration and settings", "area": "holding", "address": 11418, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 50.0 Hz"}, {"name": "Preset speed 11 (SP11)", "group": "Configuration and settings", "area": "holding", "address": 11419, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 55.0 Hz"}, {"name": "Preset speed 12 (SP12)", "group": "Configuration and settings", "area": "holding", "address": 11420, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 60.0 Hz"}, {"name": "Preset speed 13 (SP13)", "group": "Configuration and settings", "area": "holding", "address": 11421, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 70.0 Hz"}, {"name": "Preset speed 14 (SP14)", "group": "Configuration and settings", "area": "holding", "address": 11422, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 80.0 Hz"}, {"name": "Preset speed 15 (SP15)", "group": "Configuration and settings", "area": "holding", "address": 11423, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 90.0 Hz"}, {"name": "Preset speed 16 (SP16)", "group": "Configuration and settings", "area": "holding", "address": 11424, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 100.0 Hz"}, {"name": "+ speed assignment (USP)", "group": "Configuration and settings", "area": "holding", "address": 11501, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "- speed assignment (DSP)", "group": "Configuration and settings", "area": "holding", "address": 11502, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Reference frequency save (STR)", "group": "Configuration and settings", "area": "holding", "address": 11503, "type": "uint16", "access": "RW", "enum": {"0": "No save", "1": "Save to RAM", "2": "Save to EEPROM"}, "description": "Writable only when the motor is stopped; Factory setting [No save] NO"}, {"name": "Low speed timeout (TLS)", "group": "Configuration and settings", "area": "holding", "address": 11701, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 999.9 s; Factory setting 0.0 s"}, {"name": "Sleep offset threshold (SLE)", "group": "Configuration and settings", "area": "holding", "address": 11702, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 1.0 Hz ... 1000.0 Hz; Factory setting 1.0 Hz"}, {"name": "Sleep Detection mode (SLPM)", "group": "Actual values parameters", "area": "holding", "address": 11750, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "Switch", "2": "Flow", "3": "Speed", "4": "Power", "5": "Pressure", "6": "Multiple"}, "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Sleep switch assignment (SLPW)", "group": "Actual values parameters", "area": "holding", "address": 11751, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Sleep flow level (SLNL)", "group": "Actual values parameters", "area": "holding", "address": 11752, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Sleep minimum speed level (SLSL)", "group": "Actual values parameters", "area": "holding", "address": 11753, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 599.0 Hz; Factory setting 0.0 Hz"}, {"name": "Sleep power level (SLPR)", "group": "Actual values parameters", "area": "holding", "address": 11754, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Sleep delay (SLPD)", "group": "Actual values parameters", "area": "holding", "address": 11755, "type": "int16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 20 s"}, {"name": "Sleep boost speed (SLBS)", "group": "Configuration and settings", "area": "holding", "address": 11756, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 599.0 Hz; Factory setting 0.0 Hz"}, {"name": "Sleep boost time (SLBT)", "group": "Configuration and settings", "area": "holding", "address": 11757, "type": "int16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 0 s"}, {"name": "Wake Up mode (WUPM)", "group": "Configuration and settings", "area": "holding", "address": 11758, "type": "uint16", "access": "RW", "enum": {"0": "Feedback", "1": "Error", "2": "Pressure"}, "description": "Writable only when the motor is stopped; Factory setting [Feedback] FBK"}, {"name": "Wake Up process level (WUPF)", "group": "Configuration and settings", "area": "holding", "address": 11759, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Wake UP process error level (WUPE)", "group": "Configuration and settings", "area": "holding", "address": 11760, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Sleep pressure level (SLPL)", "group": "Configuration and settings", "area": "holding", "address": 11762, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Wake Up pressure level (WUPL)", "group": "Configuration and settings", "area": "holding", "address": 11763, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Wake Up delay (WUPD)", "group": "Configuration and settings", "area": "holding", "address": 11764, "type": "int16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 0 s"}, {"name": "Advanced sleep mode (ASLM)", "group": "Configuration and settings", "area": "holding", "address": 11780, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Advanced sleep check speed condition (ASLC)", "group": "Configuration and settings", "area": "holding", "address": 11781, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 599.0 Hz; Factory setting 0.0 Hz"}, {"name": "Advanced sleep check delay (ASLD)", "group": "Configuration and settings", "area": "holding", "address": 11782, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 9999 s; Factory setting 20 s"}, {"name": "Advanced sleep check reference speed (ASLR)", "group": "Configuration and settings", "area": "holding", "address": 11783, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 599.0 Hz; Factory setting 0.0 Hz"}, {"name": "Summing input 2 (SA2)", "group": "Configuration and settings", "area": "holding", "address": 11801, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Summing input 3 (SA3)", "group": "Configuration and settings", "area": "holding", "address": 11802, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Subtract reference frequency 2 (DA2)", "group": "Configuration and settings", "area": "holding", "address": 11811, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Subtract reference frequency 3 (DA3)", "group": "Configuration and settings", "area": "holding", "address": 11812, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Reference frequency 2 multiply (MA2)", "group": "Configuration and settings", "area": "holding", "address": 11821, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Reference frequency 3 multiply (MA3)", "group": "Configuration and settings", "area": "holding", "address": 11822, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Multiplying coefficient (MFR)", "group": "Setpoint parameters", "area": "holding", "address": 11831, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %"}, {"name": "PID controller feedback (PIF)", "group": "Configuration and settings", "area": "holding", "address": 11901, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Minimum PID feedback (PIF1)", "group": "Configuration and settings", "area": "holding", "address": 11904, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 100"}, {"name": "Maximum PID feedback (PIF2)", "group": "Configuration and settings", "area": "holding", "address": 11905, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 1000"}, {"name": "Minimum PID process (PIP1)", "group": "Configuration and settings", "area": "holding", "address": 11906, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 150"}, {"name": "Maximum PID process (PIP2)", "group": "Configuration and settings", "area": "holding", "address": 11907, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 900"}, {"name": "Internal PID reference (PII)", "group": "Configuration and settings", "area": "holding", "address": 11908, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "2 PID Preset assignment (PR2)", "group": "Configuration and settings", "area": "holding", "address": 11909, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "4 PID Preset assignment (PR4)", "group": "Configuration and settings", "area": "holding", "address": 11910, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Type of control (TOCT)", "group": "Configuration and settings", "area": "holding", "address": 11919, "type": "uint16", "access": "RW", "enum": {"0": "Not available", "1": "PRESSURE", "2": "FLOW", "3": "OTHER"}, "description": "Writable only when the motor is stopped; Factory setting [Not available] NA"}, {"name": "Internal PID reference (RPI)", "group": "Configuration and settings", "area": "holding", "address": 11920, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 150"}, {"name": "2nd PID preset reference (RP2)", "group": "Configuration and settings", "area": "holding", "address": 11921, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 300"}, {"name": "3rd PID preset reference (RP3)", "group": "Configuration and settings", "area": "holding", "address": 11922, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 600"}, {"name": "4th PID preset reference (RP4)", "group": "Configuration and settings", "area": "holding", "address": 11923, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 900"}, {"name": "PID feedback monitoring activation (PFMM)", "group": "Configuration and settings", "area": "holding", "address": 11930, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "PID feedback range (PFMR)", "group": "Configuration and settings", "area": "holding", "address": 11931, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 3 %"}, {"name": "PID feedback error delay (PFMD)", "group": "Configuration and settings", "area": "holding", "address": 11932, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 10 s"}, {"name": "PID feedback error response (PFMB)", "group": "Configuration and settings", "area": "holding", "address": 11933, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "PID inversion (PIC)", "group": "Configuration and settings", "area": "holding", "address": 11940, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "PID Proportional gain (RPG)", "group": "Configuration and settings", "area": "holding", "address": 11941, "type": "uint16", "scale": 0.01, "access": "RW", "description": "Range 0.01 ... 100.00; Factory setting 1.00"}, {"name": "PID controller integral gain (RIG)", "group": "Configuration and settings", "area": "holding", "address": 11942, "type": "uint16", "scale": 0.01, "access": "RW", "description": "Range 0.01 ... 100.00; Factory setting 1.00"}, {"name": "PID derivative gain (RDG)", "group": "Configuration and settings", "area": "holding", "address": 11943, "type": "uint16", "scale": 0.01, "access": "RW", "description": "Range 0.00 ... 100.00; Factory setting 0.00"}, {"name": "PID integral disabled (PIS)", "group": "Configuration and settings", "area": "holding", "address": 11944, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Predictive speed reference (FPI)", "group": "Configuration and settings", "area": "holding", "address": 11950, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "PID speed input % ref (PSR)", "group": "Configuration and settings", "area": "holding", "address": 11951, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 1 % ... 100 %; Factory setting 100 %"}, {"name": "PID controller min. output (POL)", "group": "Configuration and settings", "area": "holding", "address": 11952, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range -500.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "PID controller max. output (POH)", "group": "Configuration and settings", "area": "holding", "address": 11953, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 60.0 Hz"}, {"name": "Manual PID reference (PIM)", "group": "Configuration and settings", "area": "holding", "address": 11954, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "PID start ref frequency (SFS)", "group": "Configuration and settings", "area": "holding", "address": 11955, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Minimum feedback level warning (PAL)", "group": "Configuration and settings", "area": "holding", "address": 11961, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting 100"}, {"name": "Maximum feedback level warning (PAH)", "group": "Configuration and settings", "area": "holding", "address": 11962, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting 1000"}, {"name": "PID error warning (PER)", "group": "Configuration and settings", "area": "holding", "address": 11963, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 65535; Factory setting 100"}, {"name": "Auto/Manual select input (PAU)", "group": "Configuration and settings", "area": "holding", "address": 11970, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "PID error (RPE)", "group": "Reference parameters", "area": "holding", "address": 11980, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "PID feedback (RPF)", "group": "Reference parameters", "area": "holding", "address": 11981, "type": "uint16", "description": "Unit: Refer to programming manual; Range 0 ... 65535"}, {"name": "PID reference (RPC)", "group": "Reference parameters", "area": "holding", "address": 11982, "type": "uint16", "description": "Unit: Refer to programming manual; Range 0 ... 65535"}, {"name": "PID output (RPO)", "group": "Reference parameters", "area": "holding", "address": 11983, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "PID ramp (PRP)", "group": "Configuration and settings", "area": "holding", "address": 11984, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 99.9 s; Factory setting 0.0 s"}, {"name": "PID acceleration time (ACCP)", "group": "Configuration and settings", "area": "holding", "address": 11985, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 1 ... 9999; Factory setting 50"}, {"name": "Feed forward disturbance gain (FFG)", "group": "Configuration and settings", "area": "holding", "address": 11986, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 20.0 %"}, {"name": "Feed forward disturbance time (FFTG)", "group": "Configuration and settings", "area": "holding", "address": 11987, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 99.9 s; Factory setting 3.0 s"}, {"name": "Motor speed (SPD)", "group": "Actual values parameters", "area": "holding", "address": 12004, "type": "uint16", "description": "Unit: Refer to programming manual; Range 0 ... 65535"}, {"name": "Motor Mechanical speed (SPDM)", "group": "Actual values parameters", "area": "holding", "address": 12011, "type": "uint16", "description": "Unit: Refer to programming manual; Range 0 ... 65535"}, {"name": "Signed mechanical speed (SPD1)", "group": "Actual values parameters", "area": "holding", "address": 12012, "type": "int32", "description": "32-bit: the source does not state the word order (high word first assumed); Unit: Refer to programming manual; Range -100000 ... 100000"}, {"name": "Application pressure Unit (used as default) (SUPR)", "group": "Status parameters", "area": "holding", "address": 12021, "type": "uint16", "access": "RW", "enum": {"0": "1 Kpa", "1": "1 mbar", "2": "1 Bar", "3": "0.1 Bar", "4": "0.01 Bar", "5": "1 Psi", "6": "0.1 Psi", "7": "1 Psig", "8": "0.1 Psig", "9": "1 inH2O", "10": "1 inWg", "11": "1 inWC", "12": "1 ftWg", "13": "1 ftWc", "14": "1 ft", "15": "1 mWg", "16": "0.1 mWg", "17": "1 mWC", "18": "0.1 mWc", "19": "1 m", "20": "0.1 m", "21": "1 inHg", "22": "0.1 %", "23": "0.1"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Application flow rate Unit (used as default) (SUFR)", "group": "Status parameters", "area": "holding", "address": 12022, "type": "uint16", "access": "RW", "enum": {"0": "1 L/s", "1": "0.1 l/s", "2": "1 L/mn", "3": "1 L/h", "4": "1 dm3/mn", "5": "1 m3/s", "6": "0.1 m3/s", "7": "1 m3/mn", "8": "0.1 m3/mn", "9": "1 m3/h", "10": "0.1 m3/h", "11": "1 gal/s", "12": "1 GPM", "13": "1 gal/h", "14": "1 ft3/s", "15": "1 CFM", "16": "1 SCFM", "17": "1 ft3/h", "18": "1 Kg/s", "19": "1 Kg/mn", "20": "1 Kg/h", "21": "1 Lb/s", "22": "1 Lb/mn", "23": "1 Lb/h", "24": "0.1 %", "25": "0.1"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Application Temperature Unit (used as default) (SUTP)", "group": "Status parameters", "area": "holding", "address": 12024, "type": "uint16", "access": "RW", "enum": {"0": "0.1°C", "1": "0.1°F", "2": "0.1 %", "3": "0.1"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Application Currency Unit (SUCU)", "group": "Status parameters", "area": "holding", "address": 12025, "type": "uint16", "access": "RW", "enum": {"0": "Euro", "1": "$", "2": "£", "3": "Krone", "4": "Renminbi", "5": "Other"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Volt point 1 on 5pt V/F (U1)", "group": "Configuration and settings", "area": "holding", "address": 12403, "type": "uint16", "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 V ... 800 V; Factory setting 0 V"}, {"name": "Freq point 1on 5pt V/F (F1)", "group": "Configuration and settings", "area": "holding", "address": 12404, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Volt point 2 on 5pt V/F (U2)", "group": "Configuration and settings", "area": "holding", "address": 12405, "type": "uint16", "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 V ... 800 V; Factory setting 0 V"}, {"name": "Freq point 2 on 5pt V/F (F2)", "group": "Configuration and settings", "area": "holding", "address": 12406, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Volt point 3 on 5pt V/F (U3)", "group": "Configuration and settings", "area": "holding", "address": 12407, "type": "uint16", "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 V ... 800 V; Factory setting 0 V"}, {"name": "Freq point 3 on 5pt V/F (F3)", "group": "Configuration and settings", "area": "holding", "address": 12408, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Volt point 4 on 5pt V/F (U4)", "group": "Configuration and settings", "area": "holding", "address": 12409, "type": "uint16", "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 V ... 800 V; Factory setting 0 V"}, {"name": "Freq point 4 on 5pt V/F (F4)", "group": "Configuration and settings", "area": "holding", "address": 12410, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Volt point 5 on 5pt V/F (U5)", "group": "Configuration and settings", "area": "holding", "address": 12411, "type": "uint16", "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 V ... 800 V; Factory setting 0 V"}, {"name": "Freq point 5 on 5pt V/F (F5)", "group": "Configuration and settings", "area": "holding", "address": 12412, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Motor surge limitation (SVL)", "group": "Configuration and settings", "area": "holding", "address": 12601, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Attenuation time (SOP)", "group": "Configuration and settings", "area": "holding", "address": 12602, "type": "uint16", "access": "RW", "enum": {"6": "6 µs", "8": "8 µs", "10": "10 µs"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Scan input 1 address (NMA1)", "group": "Configuration and settings", "area": "holding", "address": 12701, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 3201"}, {"name": "Scan input 2 address (NMA2)", "group": "Configuration and settings", "area": "holding", "address": 12702, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 8604"}, {"name": "Scan input 3 address (NMA3)", "group": "Configuration and settings", "area": "holding", "address": 12703, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 4 address (NMA4)", "group": "Configuration and settings", "area": "holding", "address": 12704, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 5 address (NMA5)", "group": "Configuration and settings", "area": "holding", "address": 12705, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 6 address (NMA6)", "group": "Configuration and settings", "area": "holding", "address": 12706, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 7 address (NMA7)", "group": "Configuration and settings", "area": "holding", "address": 12707, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 8 address (NMA8)", "group": "Configuration and settings", "area": "holding", "address": 12708, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 1 address (NCA1)", "group": "Configuration and settings", "area": "holding", "address": 12721, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 8501"}, {"name": "Scan output 2 address (NCA2)", "group": "Configuration and settings", "area": "holding", "address": 12722, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 8602"}, {"name": "Scan output 3 address (NCA3)", "group": "Configuration and settings", "area": "holding", "address": 12723, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 4 address (NCA4)", "group": "Configuration and settings", "area": "holding", "address": 12724, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 5 address (NCA5)", "group": "Configuration and settings", "area": "holding", "address": 12725, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 6 address (NCA6)", "group": "Configuration and settings", "area": "holding", "address": 12726, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 7 address (NCA7)", "group": "Configuration and settings", "area": "holding", "address": 12727, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 8 address (NCA8)", "group": "Configuration and settings", "area": "holding", "address": 12728, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 65535; Factory setting 0"}, {"name": "Com scan input 1 value (NM1)", "group": "Communication parameters", "area": "holding", "address": 12741, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan input 2 value (NM2)", "group": "Communication parameters", "area": "holding", "address": 12742, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan input 3 value (NM3)", "group": "Communication parameters", "area": "holding", "address": 12743, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan input 4 value (NM4)", "group": "Communication parameters", "area": "holding", "address": 12744, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan input 5 value (NM5)", "group": "Communication parameters", "area": "holding", "address": 12745, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan input 6 value (NM6)", "group": "Communication parameters", "area": "holding", "address": 12746, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan input 7 value (NM7)", "group": "Communication parameters", "area": "holding", "address": 12747, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan input 8 value (NM8)", "group": "Communication parameters", "area": "holding", "address": 12748, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan output 1 value (NC1)", "group": "Communication parameters", "area": "holding", "address": 12761, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan output 2 value (NC2)", "group": "Communication parameters", "area": "holding", "address": 12762, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan output 3 value (NC3)", "group": "Communication parameters", "area": "holding", "address": 12763, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan output 4 value (NC4)", "group": "Communication parameters", "area": "holding", "address": 12764, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan output 5 value (NC5)", "group": "Communication parameters", "area": "holding", "address": 12765, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan output 6 value (NC6)", "group": "Communication parameters", "area": "holding", "address": 12766, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan output 7 value (NC7)", "group": "Communication parameters", "area": "holding", "address": 12767, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Com scan output 8 value (NC8)", "group": "Communication parameters", "area": "holding", "address": 12768, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Last warning (LALR)", "group": "Actual values parameters", "area": "holding", "address": 12890, "type": "uint16"}, {"name": "Used parameter set (CFPS)", "group": "Parameter set switching", "area": "holding", "address": 12900, "type": "uint16", "enum": {"0": "Not Assigned", "1": "Parameter set 1", "2": "Parameter set 2", "3": "Parameter set 3"}}, {"name": "Load parameter set command (VAL)", "group": "Parameter set switching", "area": "holding", "address": 12901, "type": "uint16", "access": "RW", "description": "Range 0 ... 1; Factory setting 0"}, {"name": "Parameter set sel 1 (CHA1)", "group": "Parameter set switching", "area": "holding", "address": 12902, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Parameter set sel 2 (CHA2)", "group": "Parameter set switching", "area": "holding", "address": 12903, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Parameter set address 1 (AD01)", "group": "Parameter set switching", "area": "holding", "address": 12911, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 2 (AD02)", "group": "Parameter set switching", "area": "holding", "address": 12912, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 3 (AD03)", "group": "Parameter set switching", "area": "holding", "address": 12913, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 4 (AD04)", "group": "Parameter set switching", "area": "holding", "address": 12914, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 5 (AD05)", "group": "Parameter set switching", "area": "holding", "address": 12915, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 6 (AD06)", "group": "Parameter set switching", "area": "holding", "address": 12916, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 7 (AD07)", "group": "Parameter set switching", "area": "holding", "address": 12917, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 8 (AD08)", "group": "Parameter set switching", "area": "holding", "address": 12918, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 9 (AD09)", "group": "Parameter set switching", "area": "holding", "address": 12919, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 10 (AD10)", "group": "Parameter set switching", "area": "holding", "address": 12920, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 11 (AD11)", "group": "Parameter set switching", "area": "holding", "address": 12921, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 12 (AD12)", "group": "Parameter set switching", "area": "holding", "address": 12922, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 13 (AD13)", "group": "Parameter set switching", "area": "holding", "address": 12923, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 14 (AD14)", "group": "Parameter set switching", "area": "holding", "address": 12924, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set address 15 (AD15)", "group": "Parameter set switching", "area": "holding", "address": 12925, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 1 (S101)", "group": "Parameter set switching", "area": "holding", "address": 12931, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 2 (S102)", "group": "Parameter set switching", "area": "holding", "address": 12932, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 3 (S103)", "group": "Parameter set switching", "area": "holding", "address": 12933, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 4 (S104)", "group": "Parameter set switching", "area": "holding", "address": 12934, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 5 (S105)", "group": "Parameter set switching", "area": "holding", "address": 12935, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 6 (S106)", "group": "Parameter set switching", "area": "holding", "address": 12936, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 7 (S107)", "group": "Parameter set switching", "area": "holding", "address": 12937, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 8 (S108)", "group": "Parameter set switching", "area": "holding", "address": 12938, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 9 (S109)", "group": "Parameter set switching", "area": "holding", "address": 12939, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 10 (S110)", "group": "Parameter set switching", "area": "holding", "address": 12940, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 11 (S111)", "group": "Parameter set switching", "area": "holding", "address": 12941, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 12 (S112)", "group": "Parameter set switching", "area": "holding", "address": 12942, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 13 (S113)", "group": "Parameter set switching", "area": "holding", "address": 12943, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 14 (S114)", "group": "Parameter set switching", "area": "holding", "address": 12944, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 1 value 15 (S115)", "group": "Parameter set switching", "area": "holding", "address": 12945, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 1 (S201)", "group": "Parameter set switching", "area": "holding", "address": 12951, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 2 (S202)", "group": "Parameter set switching", "area": "holding", "address": 12952, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 3 (S203)", "group": "Parameter set switching", "area": "holding", "address": 12953, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 4 (S204)", "group": "Parameter set switching", "area": "holding", "address": 12954, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 5 (S205)", "group": "Parameter set switching", "area": "holding", "address": 12955, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 6 (S206)", "group": "Parameter set switching", "area": "holding", "address": 12956, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 7 (S207)", "group": "Parameter set switching", "area": "holding", "address": 12957, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 8 (S208)", "group": "Parameter set switching", "area": "holding", "address": 12958, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 9 (S209)", "group": "Parameter set switching", "area": "holding", "address": 12959, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 10 (S210)", "group": "Parameter set switching", "area": "holding", "address": 12960, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 11 (S211)", "group": "Parameter set switching", "area": "holding", "address": 12961, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 12 (S212)", "group": "Parameter set switching", "area": "holding", "address": 12962, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 13 (S213)", "group": "Parameter set switching", "area": "holding", "address": 12963, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 14 (S214)", "group": "Parameter set switching", "area": "holding", "address": 12964, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 2 value 15 (S215)", "group": "Parameter set switching", "area": "holding", "address": 12965, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 1 (S301)", "group": "Parameter set switching", "area": "holding", "address": 12971, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 2 (S302)", "group": "Parameter set switching", "area": "holding", "address": 12972, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 3 (S303)", "group": "Parameter set switching", "area": "holding", "address": 12973, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 4 (S304)", "group": "Parameter set switching", "area": "holding", "address": 12974, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 5 (S305)", "group": "Parameter set switching", "area": "holding", "address": 12975, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 6 (S306)", "group": "Parameter set switching", "area": "holding", "address": 12976, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 7 (S307)", "group": "Parameter set switching", "area": "holding", "address": 12977, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 8 (S308)", "group": "Parameter set switching", "area": "holding", "address": 12978, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 9 (S309)", "group": "Parameter set switching", "area": "holding", "address": 12979, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 10 (S310)", "group": "Parameter set switching", "area": "holding", "address": 12980, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 11 (S311)", "group": "Parameter set switching", "area": "holding", "address": 12981, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 12 (S312)", "group": "Parameter set switching", "area": "holding", "address": 12982, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 13 (S313)", "group": "Parameter set switching", "area": "holding", "address": 12983, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 14 (S314)", "group": "Parameter set switching", "area": "holding", "address": 12984, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Parameter set 3 value 15 (S315)", "group": "Parameter set switching", "area": "holding", "address": 12985, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Receive PDO3-1 (RP31)", "group": "Configuration and settings", "area": "holding", "address": 13001, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Receive PDO3-2 (RP32)", "group": "Configuration and settings", "area": "holding", "address": 13002, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Receive PDO3-3 (RP33)", "group": "Configuration and settings", "area": "holding", "address": 13003, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Receive PDO3-4 (RP34)", "group": "Configuration and settings", "area": "holding", "address": 13004, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Transmit PDO3-1 (TP31)", "group": "Configuration and settings", "area": "holding", "address": 13011, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Transmit PDO3-2 (TP32)", "group": "Configuration and settings", "area": "holding", "address": 13012, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Transmit PDO3-3 (TP33)", "group": "Configuration and settings", "area": "holding", "address": 13013, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Transmit PDO3-4 (TP34)", "group": "Configuration and settings", "area": "holding", "address": 13014, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Receive PDO2-1 (RP21)", "group": "Status parameters", "area": "holding", "address": 13021, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Receive PDO2-2 (RP22)", "group": "Status parameters", "area": "holding", "address": 13022, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Receive PDO2-3 (RP23)", "group": "Status parameters", "area": "holding", "address": 13023, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Receive PDO2-4 (RP24)", "group": "Status parameters", "area": "holding", "address": 13024, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Transmit PDO2-1 (TP21)", "group": "Status parameters", "area": "holding", "address": 13031, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Transmit PDO2-2 (TP22)", "group": "Status parameters", "area": "holding", "address": 13032, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Transmit PDO2-3 (TP23)", "group": "Status parameters", "area": "holding", "address": 13033, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Transmit PDO2-4 (TP24)", "group": "Status parameters", "area": "holding", "address": 13034, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Receive PDO1-1 (RP11)", "group": "Status parameters", "area": "holding", "address": 13041, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Receive PDO1-2 (RP12)", "group": "Status parameters", "area": "holding", "address": 13042, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Receive PDO1-3 (RP13)", "group": "Status parameters", "area": "holding", "address": 13043, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Receive PDO1-4 (RP14)", "group": "Status parameters", "area": "holding", "address": 13044, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Transmit PDO1-1 (TP11)", "group": "Status parameters", "area": "holding", "address": 13051, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Transmit PDO1-2 (TP12)", "group": "Status parameters", "area": "holding", "address": 13052, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Transmit PDO1-3 (TP13)", "group": "Status parameters", "area": "holding", "address": 13053, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Transmit PDO1-4 (TP14)", "group": "Status parameters", "area": "holding", "address": 13054, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Number of TX PDO (NBTP)", "group": "Configuration and settings", "area": "holding", "address": 13070, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Number of RX PDO (NBRP)", "group": "Configuration and settings", "area": "holding", "address": 13071, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Delay to close o/p cont. (DBS)", "group": "Configuration and settings", "area": "holding", "address": 13101, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.05 s ... 60.00 s; Factory setting 0.15 s"}, {"name": "Delay to open contactor (DAS)", "group": "Configuration and settings", "area": "holding", "address": 13102, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.00 s ... 5.00 s; Factory setting 0.10 s"}, {"name": "Output contactor fdbk (RCA)", "group": "Configuration and settings", "area": "holding", "address": 13103, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Output contactor control assignment (OCC)", "group": "Configuration and settings", "area": "holding", "address": 13104, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Activation of the thermal monitoring on AI2 (TH2S)", "group": "Configuration and settings", "area": "holding", "address": 13210, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Activation of the thermal monitoring on AI3 (TH3S)", "group": "Configuration and settings", "area": "holding", "address": 13211, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Activation of the thermal monitoring on AI4 (TH4S)", "group": "Configuration and settings", "area": "holding", "address": 13212, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Activation of the thermal monitoring on AI5 (TH5S)", "group": "Configuration and settings", "area": "holding", "address": 13213, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Thermal warning level for AI2 (TH2A)", "group": "Configuration and settings", "area": "holding", "address": 13220, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32768 ... 32767; Factory setting Refer to programming manual"}, {"name": "Thermal warning level for AI3 (TH3A)", "group": "Configuration and settings", "area": "holding", "address": 13221, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32768 ... 32767; Factory setting Refer to programming manual"}, {"name": "Thermal warning level for AI4 (TH4A)", "group": "Configuration and settings", "area": "holding", "address": 13222, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32768 ... 32767; Factory setting Refer to programming manual"}, {"name": "Thermal warning level for AI5 (TH5A)", "group": "Configuration and settings", "area": "holding", "address": 13223, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32768 ... 32767; Factory setting Refer to programming manual"}, {"name": "Thermal error level for AI2 (TH2F)", "group": "Configuration and settings", "area": "holding", "address": 13230, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32768 ... 32767; Factory setting Refer to programming manual"}, {"name": "Thermal error level for AI3 (TH3F)", "group": "Configuration and settings", "area": "holding", "address": 13231, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32768 ... 32767; Factory setting Refer to programming manual"}, {"name": "Thermal error level for AI4 (TH4F)", "group": "Configuration and settings", "area": "holding", "address": 13232, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32768 ... 32767; Factory setting Refer to programming manual"}, {"name": "Thermal error level for AI5 (TH5F)", "group": "Configuration and settings", "area": "holding", "address": 13233, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32768 ... 32767; Factory setting Refer to programming manual"}, {"name": "Response to thermal error for AI2 (TH2B)", "group": "Configuration and settings", "area": "holding", "address": 13240, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "Response to thermal error for AI3 (TH3B)", "group": "Configuration and settings", "area": "holding", "address": 13241, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "Response to thermal error for AI4 (TH4B)", "group": "Configuration and settings", "area": "holding", "address": 13242, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "Response to thermal error for AI5 (TH5B)", "group": "Configuration and settings", "area": "holding", "address": 13243, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "AI2 thermal value (TH2V)", "group": "Measurement parameters", "area": "holding", "address": 13250, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "AI3 thermal value (TH3V)", "group": "Measurement parameters", "area": "holding", "address": 13251, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "AI4 thermal value (TH4V)", "group": "Measurement parameters", "area": "holding", "address": 13252, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "AI5 thermal value (TH5V)", "group": "Measurement parameters", "area": "holding", "address": 13253, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "DI5 pulseInput low frequency (PIL5)", "group": "Configuration and settings", "area": "holding", "address": 13320, "type": "uint32", "scale": 0.01, "unit": "Hz", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0.00 Hz ... 30000.00 Hz; Factory setting 0.00 Hz"}, {"name": "PulseInput DI5 high frequency (PIH5)", "group": "Configuration and settings", "area": "holding", "address": 13322, "type": "uint16", "scale": 0.01, "unit": "kHz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.00 kHz ... 30.00 kHz; Factory setting 30.00 kHz"}, {"name": "DI5 frequency filter (PFI5)", "group": "Configuration and settings", "area": "holding", "address": 13324, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 1000 ms; Factory setting 0 ms"}, {"name": "DI5 frequency measured (PFC5)", "group": "Actual values parameters", "area": "holding", "address": 13330, "type": "uint32", "scale": 0.01, "unit": "Hz", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0.00 Hz ... 42949672.95 Hz"}, {"name": "DI5 Min process (PI5J)", "group": "Configuration and settings", "area": "holding", "address": 13332, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "DI5 Max process (PI5K)", "group": "Configuration and settings", "area": "holding", "address": 13334, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "DI6 pulseInput low frequency (PIL6)", "group": "Configuration and settings", "area": "holding", "address": 13340, "type": "uint32", "scale": 0.01, "unit": "Hz", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0.00 Hz ... 30000.00 Hz; Factory setting 0.00 Hz"}, {"name": "DI6 pulseInput high frequency (PIH6)", "group": "Configuration and settings", "area": "holding", "address": 13342, "type": "uint16", "scale": 0.01, "unit": "kHz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.00 kHz ... 30.00 kHz; Factory setting 30.00 kHz"}, {"name": "DI6 frequency filter (PFI6)", "group": "Configuration and settings", "area": "holding", "address": 13344, "type": "uint16", "unit": "ms", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ms ... 1000 ms; Factory setting 0 ms"}, {"name": "DI6 frequency measured (PFC6)", "group": "Actual values parameters", "area": "holding", "address": 13350, "type": "uint32", "scale": 0.01, "unit": "Hz", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0.00 Hz ... 42949672.95 Hz"}, {"name": "DI6 Min process (PI6J)", "group": "Configuration and settings", "area": "holding", "address": 13352, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "DI6 Max process (PI6K)", "group": "Configuration and settings", "area": "holding", "address": 13354, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "Output phase rotation (PHR)", "group": "Configuration and settings", "area": "holding", "address": 13401, "type": "uint16", "access": "RW", "enum": {"0": "A - B - C phase rotation", "1": "A - C - B phase rotation"}, "description": "Writable only when the motor is stopped; Factory setting [A - B - C phase rotation] ABC"}, {"name": "F1 key assignment (FN1)", "group": "Configuration and settings", "area": "holding", "address": 13501, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "F2 key assignment (FN2)", "group": "Configuration and settings", "area": "holding", "address": 13502, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "F3 key assignment (FN3)", "group": "Configuration and settings", "area": "holding", "address": 13503, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "F4 key assignment (FN4)", "group": "Configuration and settings", "area": "holding", "address": 13504, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "HMI local/remote command (BMP)", "group": "Configuration and settings", "area": "holding", "address": 13529, "type": "uint16", "access": "RW", "enum": {"0": "Stop on switching", "1": "Bumpless", "2": "Disabled"}, "description": "Writable only when the motor is stopped; Factory setting [Disabled] DIS"}, {"name": "Device lock assignment (LES)", "group": "Configuration and settings", "area": "holding", "address": 13601, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Mains contactor control (LLC)", "group": "Configuration and settings", "area": "holding", "address": 13602, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Mains V. time out (LCT)", "group": "Configuration and settings", "area": "holding", "address": 13603, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 1 s ... 999 s; Factory setting 5 s"}, {"name": "Response to circuit breaker error (CBSR)", "group": "Configuration and settings", "area": "holding", "address": 13610, "type": "uint16", "access": "RW", "enum": {"0": "Error", "1": "warning"}, "description": "Writable only when the motor is stopped; Factory setting [Error] FLT"}, {"name": "Circuit breaker status (CBS)", "group": "Status parameters", "area": "holding", "address": 13611, "type": "uint16", "enum": {"0": "Circuit breaker not configured", "1": "Circuit breaker configuration invalid", "2": "Circuit breaker in start pulse", "3": "Circuit breaker not closed", "4": "Circuit breaker open", "5": "Circuit breaker in stop pulse", "6": "Circuit breaker not open", "7": "Circuit breaker closed", "8": "Circuit breaker stop is disable"}, "description": "Factory setting [Circuit breaker not configured] NO"}, {"name": "Circuit breaker start pulse activated (CBEP)", "group": "Configuration and settings", "area": "holding", "address": 13612, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Circuit breaker stop pulse activated (CBDP)", "group": "Configuration and settings", "area": "holding", "address": 13613, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Circuit breaker start pulse time (CBT1)", "group": "Configuration and settings", "area": "holding", "address": 13614, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.1 s ... 60.0 s; Factory setting 0.5 s"}, {"name": "Circuit breaker stop pulse time (CBT2)", "group": "Configuration and settings", "area": "holding", "address": 13615, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.1 s ... 60.0 s; Factory setting 0.5 s"}, {"name": "Circuit breaker switch-on delay (CBT3)", "group": "Configuration and settings", "area": "holding", "address": 13616, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.1 s ... 60.0 s; Factory setting 0.5 s"}, {"name": "Circuit breaker switch-off delay (CBT4)", "group": "Configuration and settings", "area": "holding", "address": 13617, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.1 s ... 60.0 s; Factory setting 0.5 s"}, {"name": "Circuit breaker Disable stop delay (CBT5)", "group": "Configuration and settings", "area": "holding", "address": 13618, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 s ... 360.0 s; Factory setting 60.0 s"}, {"name": "Lifecycle warning configuration (LCAC)", "group": "Configuration and settings", "area": "holding", "address": 13720, "type": "uint16", "access": "RW", "description": "Factory setting [Yes] YES"}, {"name": "Life cycle Date (LCAD)", "group": "Actual values parameters", "area": "holding", "address": 13721, "type": "uint16", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Mains voltage phase 1-2 (UL1)", "group": "Measurement parameters", "area": "holding", "address": 13747, "type": "int16", "scale": 0.1, "unit": "V", "description": "Range -3276.7 V ... 3276.7 V"}, {"name": "Mains voltage phase 2-3 (UL2)", "group": "Measurement parameters", "area": "holding", "address": 13748, "type": "int16", "scale": 0.1, "unit": "V", "description": "Range -3276.7 V ... 3276.7 V"}, {"name": "Mains voltage phase 3-1 (UL3)", "group": "Measurement parameters", "area": "holding", "address": 13749, "type": "int16", "scale": 0.1, "unit": "V", "description": "Range -3276.7 V ... 3276.7 V"}, {"name": "Mains frequency (FAC)", "group": "Measurement parameters", "area": "holding", "address": 13750, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "Thyristor junction temperature (TJD)", "group": "Measurement parameters", "area": "holding", "address": 13752, "type": "uint16", "unit": "°C", "description": "Range 0 °C ... 255 °C"}, {"name": "AFE Run time (BRHH)", "group": "Status parameters", "area": "holding", "address": 13756, "type": "uint32", "scale": 0.1, "unit": "h", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0.0 h ... 429496729.5 h"}, {"name": "AFE power-On time (BPHH)", "group": "Status parameters", "area": "holding", "address": 13758, "type": "uint32", "scale": 0.1, "unit": "h", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0.0 h ... 429496729.5 h"}, {"name": "AFE : Fan speed (FSBA)", "group": "Measurement parameters", "area": "holding", "address": 13770, "type": "uint16", "unit": "rpm", "description": "Range 0 rpm ... 65535 rpm"}, {"name": "AFE fan operation time (FBAT)", "group": "Actual values parameters", "area": "holding", "address": 13771, "type": "uint32", "unit": "h", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 h ... 500000 h"}, {"name": "Cabinet Fan operation time (FCT)", "group": "Actual values parameters", "area": "holding", "address": 13773, "type": "uint32", "unit": "h", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 h ... 500000 h"}, {"name": "AFE Run time (BRTH)", "group": "Actual values parameters", "area": "holding", "address": 13775, "type": "uint32", "unit": "s", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 s ... 4294967295 s"}, {"name": "AFE power-on time (BPTH)", "group": "Actual values parameters", "area": "holding", "address": 13777, "type": "uint32", "unit": "s", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 s ... 4294967295 s"}, {"name": "AFE Number of starts (BNSA)", "group": "Actual values parameters", "area": "holding", "address": 13779, "type": "uint32", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 ... 4294967295"}, {"name": "Mains current (ILN)", "group": "Measurement parameters", "area": "holding", "address": 13783, "type": "uint16", "description": "Unit: Refer to programming manual; Range 0 ... 65535"}, {"name": "AFE generator mode (CLIG)", "group": "Configuration and settings", "area": "holding", "address": 13785, "type": "int16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range -0.2 % ... 120.0 %; Factory setting -0.1 %"}, {"name": "Input power factor (PWF)", "group": "Actual values parameters", "area": "holding", "address": 13786, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range -3276.7 % ... 3276.7 %"}, {"name": "Cabinet overheat response (CHR)", "group": "Configuration and settings", "area": "holding", "address": 13790, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "warning", "2": "Error", "3": "Warning then error with time delay"}, "description": "Factory setting Refer to programming manual"}, {"name": "Evacuation mains voltage (URES)", "group": "Configuration and settings", "area": "holding", "address": 13801, "type": "uint16", "access": "RW", "enum": {"20": "200 Vac", "22": "220 Vac", "23": "230 Vac", "24": "240 Vac", "38": "380 Vac", "40": "400 Vac", "44": "440 Vac", "46": "460 Vac", "48": "480 Vac", "50": "500Vac", "52": "525 Vac", "57": "575 Vac", "60": "600 Vac", "69": "690 Vac"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Undervoltage level (USL)", "group": "Configuration and settings", "area": "holding", "address": 13802, "type": "uint16", "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 100 V ... 435 V; Factory setting Refer to programming manual"}, {"name": "Response to undervoltage (USB)", "group": "Configuration and settings", "area": "holding", "address": 13803, "type": "uint16", "access": "RW", "enum": {"0": "Error triggered", "1": "Error triggered w/o relay", "2": "Warning Triggered"}, "description": "Writable only when the motor is stopped; Factory setting [Error triggered] 0"}, {"name": "Undervoltage timeout (UST)", "group": "Configuration and settings", "area": "holding", "address": 13804, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.2 s ... 999.9 s; Factory setting 0.2 s"}, {"name": "Under V prevention level (UPL)", "group": "Configuration and settings", "area": "holding", "address": 13811, "type": "uint16", "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 141 V ... 495 V; Factory setting Refer to programming manual"}, {"name": "DC bus maintain time (TBS)", "group": "Configuration and settings", "area": "holding", "address": 13812, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 1 s ... 9999 s; Factory setting 9999 s"}, {"name": "Undervolt. restart time (TSM)", "group": "Configuration and settings", "area": "holding", "address": 13813, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 1.0 s ... 999.9 s; Factory setting 1.0 s"}, {"name": "Maximum stop time (STM)", "group": "Configuration and settings", "area": "holding", "address": 13814, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.01 s ... 60.00 s; Factory setting 1.00 s"}, {"name": "Energy Saving input assignment (IDLS)", "group": "Configuration and settings", "area": "holding", "address": 13860, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Delay before Energy Saving (IDLM)", "group": "Configuration and settings", "area": "holding", "address": 13861, "type": "int16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range -1 s ... 32400 s; Factory setting Refer to programming manual"}, {"name": "Idle mode timeout (IDLT)", "group": "Configuration and settings", "area": "holding", "address": 13862, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 1 s ... 999 s; Factory setting Refer to programming manual"}, {"name": "Overmodulation activation (OVMA)", "group": "Configuration and settings", "area": "holding", "address": 13876, "type": "uint16", "access": "RW", "enum": {"0": "Default", "255": "Full"}, "description": "Writable only when the motor is stopped; Factory setting [Default] DEFAULT"}, {"name": "Output voltage limitation (VLIM)", "group": "Configuration and settings", "area": "holding", "address": 13879, "type": "uint16", "unit": "V", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 V ... 9999 V; Factory setting VLIM_DEFAULT"}, {"name": "DC bus ripple amplitude (DCRA)", "group": "Status parameters", "area": "holding", "address": 13881, "type": "int16", "unit": "V", "description": "Range -32767 V ... 32767 V"}, {"name": "DC bus ripple estimated frequency (DCRF)", "group": "Status parameters", "area": "holding", "address": 13882, "type": "int16", "scale": 0.1, "unit": "Hz", "description": "Range -3276.7 Hz ... 3276.7 Hz"}, {"name": "DC bus ripple time counter (DCRD)", "group": "Status parameters", "area": "holding", "address": 13883, "type": "uint16", "unit": "h", "description": "Range 0 h ... 65535 h"}, {"name": "DC bus ripple configuration (DCRC)", "group": "Configuration and settings", "area": "holding", "address": 13884, "type": "uint16", "access": "RW", "enum": {"0": "Ignore monitoring", "1": "Warning triggered", "2": "Error triggered"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Current loop configured gain (CRB)", "group": "Configuration and settings", "area": "holding", "address": 13885, "type": "uint16", "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 Hz ... 65535 Hz; Factory setting 0 Hz"}, {"name": "Current loop default gain (CRBA)", "group": "Status parameters", "area": "holding", "address": 13886, "type": "int16", "unit": "Hz", "description": "Range 8 Hz ... 100 Hz"}, {"name": "Current loop damping coefficient (CRDR)", "group": "Configuration and settings", "area": "holding", "address": 13887, "type": "int16", "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 1 % ... 800 %; Factory setting Refer to programming manual"}, {"name": "Use of an input filer (IFI)", "group": "Configuration and settings", "area": "holding", "address": 13888, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Boost activation (BOA)", "group": "Configuration and settings", "area": "holding", "address": 13910, "type": "uint16", "access": "RW", "enum": {"0": "Inactive", "1": "Dynamic", "2": "Static", "3": "Constant"}, "description": "Writable only when the motor is stopped; Factory setting Refer to programming manual"}, {"name": "Frequency boost (FAB)", "group": "Configuration and settings", "area": "holding", "address": 13911, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Boost (BOO)", "group": "Configuration and settings", "area": "holding", "address": 13912, "type": "int16", "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range -100 % ... 100 %; Factory setting Refer to programming manual"}, {"name": "Auto angle setting type (AST)", "group": "Configuration and settings", "area": "holding", "address": 13925, "type": "uint16", "access": "RW", "enum": {"5": "Pulse Signal injection", "6": "Pulse Signal injection - Optimized", "7": "Rotational current injection", "254": "NO alignment"}, "description": "Writable only when the motor is stopped; Factory setting [Pulse Signal injection - Optimized] PSIO"}, {"name": "Alignment rotational current level (RCL)", "group": "Configuration and settings", "area": "holding", "address": 13928, "type": "int16", "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 10 % ... 300 %; Factory setting 75 %"}, {"name": "Alignment rotational torque current (RTC)", "group": "Configuration and settings", "area": "holding", "address": 13929, "type": "int16", "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 % ... 300 %; Factory setting 0 %"}, {"name": "RCI alignment with transformer (RCIR)", "group": "Configuration and settings", "area": "holding", "address": 13930, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "RCI maximum output frequency (RCSP)", "group": "Configuration and settings", "area": "holding", "address": 13931, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range -0.1 Hz ... 500.0 Hz; Factory setting RCSP_AUTO"}, {"name": "RCI round number (RCRP)", "group": "Configuration and settings", "area": "holding", "address": 13932, "type": "int16", "access": "RW", "description": "Writable only when the motor is stopped; Range -1 ... 32767; Factory setting RCSP_AUTO"}, {"name": "Pairing password (PPI)", "group": "Configuration and settings", "area": "holding", "address": 14001, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 9999; Factory setting 0"}, {"name": "Maximum braking current level (BDCL)", "group": "Configuration and settings", "area": "holding", "address": 14150, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 % ... 500.0 %; Factory setting 0.0 %"}, {"name": "Hysteresis frequency (SRB)", "group": "Configuration and settings", "area": "holding", "address": 14401, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.3 Hz ... 500.0 Hz; Factory setting 0.3 Hz"}, {"name": "Underload detection delay (ULT)", "group": "Configuration and settings", "area": "holding", "address": 14411, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 100 s; Factory setting 0 s"}, {"name": "Response to underload error (UDL)", "group": "Configuration and settings", "area": "holding", "address": 14412, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Unld time Before Restart (FTU)", "group": "Configuration and settings", "area": "holding", "address": 14413, "type": "uint16", "unit": "min", "access": "RW", "description": "Range 0 min ... 6 min; Factory setting 0 min"}, {"name": "Unld. Freq.Thr. Detection (RMUD)", "group": "Configuration and settings", "area": "holding", "address": 14414, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Unld.Thr. at O speed (LUL)", "group": "Configuration and settings", "area": "holding", "address": 14415, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 0 %"}, {"name": "Unld.Thr. at Nom. speed (LUN)", "group": "Configuration and settings", "area": "holding", "address": 14416, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 20 % ... 100 %; Factory setting 60 %"}, {"name": "Overload detection delay (TOL)", "group": "Configuration and settings", "area": "holding", "address": 14421, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 100 s; Factory setting 0 s"}, {"name": "Response to overload error (ODL)", "group": "Configuration and settings", "area": "holding", "address": 14422, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Ovld time Before Restart (FTO)", "group": "Configuration and settings", "area": "holding", "address": 14423, "type": "uint16", "unit": "min", "access": "RW", "description": "Range 0 min ... 6 min; Factory setting 0 min"}, {"name": "Current overload threshold (LOC)", "group": "Configuration and settings", "area": "holding", "address": 14425, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 70 % ... 150 %; Factory setting 110 %"}, {"name": "Flow limit threshold active (CHT)", "group": "Configuration and settings", "area": "holding", "address": 14512, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Flow limit Thd disable (RCHT)", "group": "Configuration and settings", "area": "holding", "address": 14513, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Flow limit deceleration (DFL)", "group": "Configuration and settings", "area": "holding", "address": 14514, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 1 ... 9999; Factory setting 50"}, {"name": "Flow limitation mode (FLM)", "group": "Configuration and settings", "area": "holding", "address": 14515, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Safe torque Off function Status (STOS)", "group": "Safety function", "area": "holding", "address": 15322, "type": "uint16", "enum": {"0": "Not active", "1": "Active", "2": "Error"}}, {"name": "STOx digital input State (STOF)", "group": "Status parameters", "area": "holding", "address": 15323, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Scan input 1 address (OMA1)", "group": "Configuration and settings", "area": "holding", "address": 15401, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 3201"}, {"name": "Scan input 2 address (OMA2)", "group": "Configuration and settings", "area": "holding", "address": 15402, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 8604"}, {"name": "Scan input 3 address (OMA3)", "group": "Configuration and settings", "area": "holding", "address": 15403, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 4 address (OMA4)", "group": "Configuration and settings", "area": "holding", "address": 15404, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 5 address (OMA5)", "group": "Configuration and settings", "area": "holding", "address": 15405, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 6 address (OMA6)", "group": "Configuration and settings", "area": "holding", "address": 15406, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 7 address (OMA7)", "group": "Communication parameters", "area": "holding", "address": 15407, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 8 address (OMA8)", "group": "Communication parameters", "area": "holding", "address": 15408, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 9 address (OMA9)", "group": "Communication parameters", "area": "holding", "address": 15409, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 10 address (OMAA)", "group": "Communication parameters", "area": "holding", "address": 15410, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 11 address (OMAB)", "group": "Communication parameters", "area": "holding", "address": 15411, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 12 address (OMAC)", "group": "Communication parameters", "area": "holding", "address": 15412, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 13 address (OMAD)", "group": "Communication parameters", "area": "holding", "address": 15413, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 14 address (OMAE)", "group": "Communication parameters", "area": "holding", "address": 15414, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 15 address (OMAF)", "group": "Communication parameters", "area": "holding", "address": 15415, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan input 16 address (OMAG)", "group": "Communication parameters", "area": "holding", "address": 15416, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 1 address (OCA1)", "group": "Configuration and settings", "area": "holding", "address": 15421, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 8501"}, {"name": "Scan output 2 address (OCA2)", "group": "Configuration and settings", "area": "holding", "address": 15422, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 8602"}, {"name": "Scan output 3 address (OCA3)", "group": "Configuration and settings", "area": "holding", "address": 15423, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 4 address (OCA4)", "group": "Configuration and settings", "area": "holding", "address": 15424, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 5 address (OCA5)", "group": "Configuration and settings", "area": "holding", "address": 15425, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 6 address (OCA6)", "group": "Configuration and settings", "area": "holding", "address": 15426, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 7 address (OCA7)", "group": "Communication parameters", "area": "holding", "address": 15427, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 8 address (OCA8)", "group": "Communication parameters", "area": "holding", "address": 15428, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 9 address (OCA9)", "group": "Communication parameters", "area": "holding", "address": 15429, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 10 address (OCAA)", "group": "Communication parameters", "area": "holding", "address": 15430, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 11 address (OCAB)", "group": "Communication parameters", "area": "holding", "address": 15431, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 12 address (OCAC)", "group": "Communication parameters", "area": "holding", "address": 15432, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 13 address (OCAD)", "group": "Communication parameters", "area": "holding", "address": 15433, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 14 address (OCAE)", "group": "Communication parameters", "area": "holding", "address": 15434, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 15 address (OCAF)", "group": "Communication parameters", "area": "holding", "address": 15435, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Scan output 16 address (OCAG)", "group": "Communication parameters", "area": "holding", "address": 15436, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "Maximum current of PSI alignment (MCR)", "group": "Configuration and settings", "area": "holding", "address": 15607, "type": "uint16", "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 % ... 300 %; Factory setting 0 %"}, {"name": "Application selection (APPT)", "group": "Configuration and settings", "area": "holding", "address": 15699, "type": "uint16", "access": "RW", "enum": {"0": "Generic pump Control", "1": "Pump level control application", "2": "Pump booster control application", "3": "Generic fan control application"}, "description": "Writable only when the motor is stopped; Factory setting [Generic pump Control] GPMP"}, {"name": "Inlet pressure sensor assignment (PS1A)", "group": "Configuration and settings", "area": "holding", "address": 15701, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Outlet pressure sensor assignment (PS2A)", "group": "Configuration and settings", "area": "holding", "address": 15702, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Installation flow sensor assignment (FS1A)", "group": "Configuration and settings", "area": "holding", "address": 15703, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Pump flow sensor assignment (FS2A)", "group": "Configuration and settings", "area": "holding", "address": 15704, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Inlet pressure value (PS1V)", "group": "Measurement parameters", "area": "holding", "address": 15713, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Outlet pressure (PS2V)", "group": "Measurement parameters", "area": "holding", "address": 15714, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Installation flow value (FS1V)", "group": "Actual values parameters", "area": "holding", "address": 15715, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Pump flow value (FS2V)", "group": "Status parameters", "area": "holding", "address": 15716, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Total Quantity (FS1C)", "group": "Actual values parameters", "area": "holding", "address": 15717, "type": "int32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 2147483647"}, {"name": "Level sensor assignment (LCSA)", "group": "Configuration and settings", "area": "holding", "address": 15720, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not configured] NO"}, {"name": "Level sensor value (LCSV)", "group": "Status parameters", "area": "holding", "address": 15721, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Pump Characteristics Status (PCS)", "group": "Status parameters", "area": "holding", "address": 15750, "type": "uint16", "enum": {"0": "None", "1": "Inactive", "2": "Active", "3": "Failed"}}, {"name": "Pump speed for which curves are entered (PCSP)", "group": "Configuration and settings", "area": "holding", "address": 15751, "type": "int16", "unit": "rpm", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 rpm ... 32767 rpm; Factory setting Refer to programming manual"}, {"name": "Flow rate entered at point x (for HQ and PQ curves) (PCQ1)", "group": "Configuration and settings", "area": "holding", "address": 15752, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Flow rate entered at point x (for HQ and PQ curves) (PCQ2)", "group": "Configuration and settings", "area": "holding", "address": 15753, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Flow rate entered at point x (for HQ and PQ curves) (PCQ3)", "group": "Configuration and settings", "area": "holding", "address": 15754, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Flow rate entered at point x (for HQ and PQ curves) (PCQ4)", "group": "Configuration and settings", "area": "holding", "address": 15755, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Flow rate entered at point x (for HQ and PQ curves) (PCQ5)", "group": "Configuration and settings", "area": "holding", "address": 15756, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Head entered at y (for HQ curve) (PCH1)", "group": "Configuration and settings", "area": "holding", "address": 15757, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Head entered at y (for HQ curve) (PCH2)", "group": "Configuration and settings", "area": "holding", "address": 15758, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Head entered at y (for HQ curve) (PCH3)", "group": "Configuration and settings", "area": "holding", "address": 15759, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Head entered at y (for HQ curve) (PCH4)", "group": "Configuration and settings", "area": "holding", "address": 15760, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Head entered at y (for HQ curve) (PCH5)", "group": "Configuration and settings", "area": "holding", "address": 15761, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Mechanical power entered at point y (PCP1)", "group": "Configuration and settings", "area": "holding", "address": 15762, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Mechanical power entered at point y (PCP2)", "group": "Configuration and settings", "area": "holding", "address": 15763, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Mechanical power entered at point y (PCP3)", "group": "Configuration and settings", "area": "holding", "address": 15764, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Mechanical power entered at point y (PCP4)", "group": "Configuration and settings", "area": "holding", "address": 15765, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Mechanical power entered at point y (PCP5)", "group": "Configuration and settings", "area": "holding", "address": 15766, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "BEP Head (PCBH)", "group": "Configuration and settings", "area": "holding", "address": 15767, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Flow at BEP (PCBQ)", "group": "Configuration and settings", "area": "holding", "address": 15768, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "BEP power (PCBP)", "group": "Configuration and settings", "area": "holding", "address": 15769, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Select which curve data are managed and will be entered on (PCM)", "group": "Configuration and settings", "area": "holding", "address": 15770, "type": "uint16", "access": "RW", "enum": {"0": "Pump characteristics disabled", "1": "Enable Head vs flow curve", "2": "Enable power vs flow curve", "3": "Enable Head vs flow and power vs flow curves", "4": "NPSH, P, H, Q data are activated"}, "description": "Writable only when the motor is stopped; Factory setting [Pump characteristics disabled] NO"}, {"name": "Pump Curve Activation (PCA)", "group": "Configuration and settings", "area": "holding", "address": 15771, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Liquid density used to characterize pump (RHOC)", "group": "Configuration and settings", "area": "holding", "address": 15772, "type": "uint16", "unit": "kg/m³", "access": "RW", "description": "Writable only when the motor is stopped; Range 100 kg/m³ ... 10000 kg/m³; Factory setting 1000 kg/m³"}, {"name": "Pipe Fill Activation mode (PFM)", "group": "Configuration and settings", "area": "holding", "address": 15800, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "Pipe-Fill on PID feedback", "2": "Pipe-Fill on Outlet pressure"}, "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Pipe Fill Activation Source (PFEC)", "group": "Configuration and settings", "area": "holding", "address": 15801, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Yes] YES"}, {"name": "Pipe Fill TiMe (PFHT)", "group": "Configuration and settings", "area": "holding", "address": 15802, "type": "int16", "unit": "s", "access": "RW", "description": "Range 0 s ... 32767 s; Factory setting 10 s"}, {"name": "Pipe Fill SPeed (PFHS)", "group": "Configuration and settings", "area": "holding", "address": 15803, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 599.0 Hz; Factory setting 25.0 Hz"}, {"name": "Pipe Fill pressure level (PFHP)", "group": "Configuration and settings", "area": "holding", "address": 15804, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Pipe Fill on wake up (PFWU)", "group": "Configuration and settings", "area": "holding", "address": 15806, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Yes] YES"}, {"name": "Priming pump assignment (PPOA)", "group": "Configuration and settings", "area": "holding", "address": 15820, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Delay before starting the lead pump (PPSD)", "group": "Configuration and settings", "area": "holding", "address": 15821, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 30 s"}, {"name": "Primed switch assignment (PPWA)", "group": "Configuration and settings", "area": "holding", "address": 15823, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Primed Inlet pressure level (PPIL)", "group": "Configuration and settings", "area": "holding", "address": 15824, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Primed condition delay (PPFD)", "group": "Configuration and settings", "area": "holding", "address": 15825, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 60 s; Factory setting 0 s"}, {"name": "Select the jockey pump (JP)", "group": "Configuration and settings", "area": "holding", "address": 15830, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Pressure threshold to start the jockey pump (JPRP)", "group": "Configuration and settings", "area": "holding", "address": 15831, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Delay to start the jockey pump (JPRD)", "group": "Configuration and settings", "area": "holding", "address": 15832, "type": "int16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 0 s"}, {"name": "Pressure threshold to stop the jockey pump (JPSP)", "group": "Configuration and settings", "area": "holding", "address": 15833, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Pump reference speed when VSP is selected as jockey pump (JPRS)", "group": "Configuration and settings", "area": "holding", "address": 15834, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 599.0 Hz; Factory setting Refer to programming manual"}, {"name": "Delay to wake up the system when pressure feedback stays low (JPWD)", "group": "Configuration and settings", "area": "holding", "address": 15835, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 0 s"}, {"name": "Mode selection (FLCM)", "group": "Configuration and settings", "area": "holding", "address": 15840, "type": "uint16", "access": "RW", "enum": {"0": "Inactive", "1": "Display", "2": "Compensation"}, "description": "Writable only when the motor is stopped; Factory setting [Inactive] NO"}, {"name": "Alpha (FLDA)", "group": "Configuration and settings", "area": "holding", "address": 15841, "type": "int16", "scale": 0.1, "access": "RW", "description": "Range 0.0 ... 2.0; Factory setting 2.0"}, {"name": "Compensation at point 1 (FLH1)", "group": "Configuration and settings", "area": "holding", "address": 15842, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Flow rate Working point (FLQ1)", "group": "Configuration and settings", "area": "holding", "address": 15843, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Static compensation (FLH0)", "group": "Configuration and settings", "area": "holding", "address": 15844, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Friction Loss Delta pressure (FLPD)", "group": "Configuration and settings", "area": "holding", "address": 15845, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Outlet pressure monitoring mode (OPPM)", "group": "Configuration and settings", "area": "holding", "address": 15850, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "Switch", "2": "Sensor", "3": "Both"}, "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Outlet pressure digital input assignment (OPPW)", "group": "Configuration and settings", "area": "holding", "address": 15851, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Outlet pressure minimum level (OPPL)", "group": "Configuration and settings", "area": "holding", "address": 15852, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Outlet pressure maximum level (OPPH)", "group": "Configuration and settings", "area": "holding", "address": 15853, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Outlet pressure error delay (OPPD)", "group": "Configuration and settings", "area": "holding", "address": 15854, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 0 s"}, {"name": "Response to Outlet pressure error (OPPB)", "group": "Configuration and settings", "area": "holding", "address": 15855, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "High flow detection activation (HFPM)", "group": "Configuration and settings", "area": "holding", "address": 15860, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "High flow Max level (HFPL)", "group": "Configuration and settings", "area": "holding", "address": 15861, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "High flow delay (HFPD)", "group": "Configuration and settings", "area": "holding", "address": 15862, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 10 s"}, {"name": "Response to high flow error (HFPB)", "group": "Configuration and settings", "area": "holding", "address": 15863, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "Pump cycle monitoring mode (PCPM)", "group": "Configuration and settings", "area": "holding", "address": 15900, "type": "uint16", "access": "RW", "enum": {"0": "Pump cycle monitoring disabled", "1": "Pump cycle monitoring mode 1", "2": "Pump cycle monitoring mode 2"}, "description": "Writable only when the motor is stopped; Factory setting [Pump cycle monitoring disabled] NO"}, {"name": "Pump cycle maximum allowed starts (PCPN)", "group": "Configuration and settings", "area": "holding", "address": 15901, "type": "uint16", "access": "RW", "description": "Range 1 ... 99; Factory setting 6"}, {"name": "Pump cycle timeframe (PCPT)", "group": "Configuration and settings", "area": "holding", "address": 15902, "type": "uint16", "unit": "min", "access": "RW", "description": "Range 0 min ... 3600 min; Factory setting 60 min"}, {"name": "Response to pump cycle error (PCPB)", "group": "Configuration and settings", "area": "holding", "address": 15903, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "Inlet pressure monitoring mode (IPPM)", "group": "Configuration and settings", "area": "holding", "address": 15910, "type": "uint16", "access": "RW", "enum": {"0": "NO", "1": "warning", "2": "Compensation"}, "description": "Writable only when the motor is stopped; Factory setting [NO] NO"}, {"name": "Inlet pressure high threshold (IPPH)", "group": "Configuration and settings", "area": "holding", "address": 15911, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Inlet pressure low threshold (IPPL)", "group": "Configuration and settings", "area": "holding", "address": 15912, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Inlet pressure maximum compensated pressure (IPPC)", "group": "Configuration and settings", "area": "holding", "address": 15913, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Response to Inlet pressure error (IPPB)", "group": "Configuration and settings", "area": "holding", "address": 15914, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "Inlet pressure digital input assignment (IPPW)", "group": "Configuration and settings", "area": "holding", "address": 15916, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Inlet pressure error delay (IPPD)", "group": "Configuration and settings", "area": "holding", "address": 15917, "type": "int16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 0 s"}, {"name": "External Anti-Jam trigger (JETC)", "group": "Configuration and settings", "area": "holding", "address": 15920, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Automatic Anti-Jam trigger (JATC)", "group": "Configuration and settings", "area": "holding", "address": 15921, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "Start", "2": "Time", "3": "Torque"}, "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Inactive time before triggering Anti-Jam (JTCT)", "group": "Configuration and settings", "area": "holding", "address": 15922, "type": "uint16", "unit": "h", "access": "RW", "description": "Range 0 h ... 9999 h; Factory setting 24 h"}, {"name": "Anti-Jam torque level (JTCL)", "group": "Configuration and settings", "area": "holding", "address": 15923, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 10.0 % ... 150.0 %; Factory setting 110.0 %"}, {"name": "Delay before triggering Anti-Jam in torque mode (JTCD)", "group": "Configuration and settings", "area": "holding", "address": 15924, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 10 s"}, {"name": "Anti-Jam forward deceleration (JDEC)", "group": "Configuration and settings", "area": "holding", "address": 15925, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 3000; Factory setting 30"}, {"name": "Anti-Jam reverse deceleration (JDER)", "group": "Configuration and settings", "area": "holding", "address": 15926, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 3000; Factory setting 30"}, {"name": "Anti-Jam forward acceleration (JACC)", "group": "Configuration and settings", "area": "holding", "address": 15927, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 3000; Factory setting 30"}, {"name": "Anti-Jam reverse acceleration (JACR)", "group": "Configuration and settings", "area": "holding", "address": 15928, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 3000; Factory setting 30"}, {"name": "Anti-Jam forward time (JFDT)", "group": "Configuration and settings", "area": "holding", "address": 15929, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 300 s; Factory setting 1 s"}, {"name": "Anti-Jam reverse time (JRVT)", "group": "Configuration and settings", "area": "holding", "address": 15930, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 300 s; Factory setting 1 s"}, {"name": "Anti-Jam forward speed (JFDS)", "group": "Configuration and settings", "area": "holding", "address": 15931, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 599.0 Hz; Factory setting 0.0 Hz"}, {"name": "Anti-Jam reverse speed (JRVS)", "group": "Configuration and settings", "area": "holding", "address": 15932, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 599.0 Hz; Factory setting 0.0 Hz"}, {"name": "Anti-Jam stop time between forward and reverse (JZST)", "group": "Configuration and settings", "area": "holding", "address": 15933, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 300 s; Factory setting 0 s"}, {"name": "Anti-Jam cycle number (JNBC)", "group": "Configuration and settings", "area": "holding", "address": 15934, "type": "uint16", "access": "RW", "description": "Range 1 ... 100; Factory setting 10"}, {"name": "Maximum allowed consecutive Anti-Jam sequences (JAMN)", "group": "Configuration and settings", "area": "holding", "address": 15936, "type": "uint16", "access": "RW", "description": "Range 1 ... 99; Factory setting 2"}, {"name": "Time interval to define two Anti-Jam sequences as consecutive (JAMT)", "group": "Configuration and settings", "area": "holding", "address": 15937, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 60 s"}, {"name": "Response to Anti-Jam error (JAMB)", "group": "Configuration and settings", "area": "holding", "address": 15938, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Dry Run mode (DRYM)", "group": "Configuration and settings", "area": "holding", "address": 15950, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "Switch", "2": "Power"}, "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Dry Run switch select (DRYW)", "group": "Configuration and settings", "area": "holding", "address": 15951, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Dry Run error time delay (DRYD)", "group": "Configuration and settings", "area": "holding", "address": 15952, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 5 s"}, {"name": "Dry Run restart time delay (DRYR)", "group": "Configuration and settings", "area": "holding", "address": 15953, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 10 s ... 3600 s; Factory setting 60 s"}, {"name": "Dry Run Factor (DRYX)", "group": "Configuration and settings", "area": "holding", "address": 15954, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 100 %; Factory setting 90 %"}, {"name": "No flow low speed (NFLS)", "group": "Configuration and settings", "area": "holding", "address": 15960, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 599.0 Hz; Factory setting 0.0 Hz"}, {"name": "No flow low power (NFLP)", "group": "Configuration and settings", "area": "holding", "address": 15961, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "No flow high speed (NFHS)", "group": "Configuration and settings", "area": "holding", "address": 15962, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 599.0 Hz; Factory setting 0.0 Hz"}, {"name": "No flow high power (NFHP)", "group": "Configuration and settings", "area": "holding", "address": 15963, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Pump low flow monitoring mode (PLFM)", "group": "Configuration and settings", "area": "holding", "address": 15970, "type": "uint16", "access": "RW", "enum": {"0": "No", "1": "SW", "2": "Q", "3": "QN", "5": "NF"}, "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Pump low flow digital input assignment (PLFW)", "group": "Configuration and settings", "area": "holding", "address": 15971, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Pump low flow minimum level (PLFL)", "group": "Configuration and settings", "area": "holding", "address": 15972, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Pump low flow power factor (PLFX)", "group": "Configuration and settings", "area": "holding", "address": 15973, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 100 % ... 500 %; Factory setting 110 %"}, {"name": "Pump low flow activation delay (PLFA)", "group": "Configuration and settings", "area": "holding", "address": 15974, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 10 s"}, {"name": "Pump low flow error delay (PLFD)", "group": "Configuration and settings", "area": "holding", "address": 15975, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 10 s"}, {"name": "Response to pump low flow error (PLFB)", "group": "Configuration and settings", "area": "holding", "address": 15976, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Pump low flow restart delay (PLFR)", "group": "Configuration and settings", "area": "holding", "address": 15977, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 3600 s; Factory setting 0 s"}, {"name": "Application state (APPS)", "group": "Status parameters", "area": "holding", "address": 15980, "type": "uint16", "enum": {"0": "Running", "1": "Stop", "2": "Local mode is active", "3": "Channel 2 active", "4": "Manual mode is active", "5": "PID active", "6": "Anti-Jam is in progress", "7": "Flow limit In progress", "8": "PipeFill is in progress", "9": "Jockey pump is active", "10": "Boost is in progress", "11": "Sleep mode is active", "12": "Priming pump is active", "13": "Inlet pressure Compensation is in progress", "15": "Undefined", "16": "Vortex control learning in progress", "17": "Vortex control active"}}, {"name": "System application state (APSS)", "group": "Status parameters", "area": "holding", "address": 15981, "type": "uint16"}, {"name": "Flow Estimation mode (FEM)", "group": "Configuration and settings", "area": "holding", "address": 16000, "type": "uint16", "access": "RW", "enum": {"0": "Pump characteristics disabled", "1": "Enable Head vs flow curve", "2": "Activate power vs flow curve"}, "description": "Writable only when the motor is stopped; Factory setting [Pump characteristics disabled] NO"}, {"name": "Density (RHO)", "group": "Configuration and settings", "area": "holding", "address": 16002, "type": "uint16", "unit": "kg/m³", "access": "RW", "description": "Range 100 kg/m³ ... 10000 kg/m³; Factory setting 1000 kg/m³"}, {"name": "Head Dynamic Gain (HEG)", "group": "Configuration and settings", "area": "holding", "address": 16003, "type": "int16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range -100.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Head Static offset (HEO)", "group": "Configuration and settings", "area": "holding", "address": 16004, "type": "int16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range -100.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Power Dynamic Gain (PEG)", "group": "Configuration and settings", "area": "holding", "address": 16005, "type": "int16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range -100.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Power Static offset (PEO)", "group": "Configuration and settings", "area": "holding", "address": 16006, "type": "int16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range -100.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Estimated pump flow value (SLFV)", "group": "Actual values parameters", "area": "holding", "address": 16007, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Estimated pump flow min (SLFJ)", "group": "Configuration and settings", "area": "holding", "address": 16008, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Estimated pump flow max (SLFK)", "group": "Configuration and settings", "area": "holding", "address": 16009, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting Refer to programming manual"}, {"name": "Estimated pump head value (SLHV)", "group": "Actual values parameters", "area": "holding", "address": 16012, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Estimated pump delta pressure value (SLDP)", "group": "Status parameters", "area": "holding", "address": 16015, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Estimated pump delta pressure min (SLDJ)", "group": "Configuration and settings", "area": "holding", "address": 16016, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Estimated pump delta pressure max (SLDK)", "group": "Configuration and settings", "area": "holding", "address": 16017, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting Refer to programming manual"}, {"name": "Pump system flow (SLFS)", "group": "Actual values parameters", "area": "holding", "address": 16021, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Pump system electrical power (EPRS)", "group": "Actual values parameters", "area": "holding", "address": 16023, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Pump system efficiency indicator (EFYS)", "group": "Actual values parameters", "area": "holding", "address": 16024, "type": "int16", "scale": 0.1, "unit": "%", "description": "Range 0.0 % ... 100.0 %"}, {"name": "Pump system energy consumption indicator (ECIS)", "group": "Actual values parameters", "area": "holding", "address": 16025, "type": "int16", "description": "Unit: Refer to programming manual; Range 0 ... 32767"}, {"name": "Pump system performance indicator (EPIS)", "group": "Actual values parameters", "area": "holding", "address": 16026, "type": "int16", "description": "Unit: Refer to programming manual; Range 0 ... 32767"}, {"name": "Pump system delta pressure (SLDS)", "group": "Status parameters", "area": "holding", "address": 16027, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Pump System flow min (SSFJ)", "group": "Configuration and settings", "area": "holding", "address": 16030, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Pump System flow max (SSFK)", "group": "Configuration and settings", "area": "holding", "address": 16031, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting Refer to programming manual"}, {"name": "Pump System delta pressure min (SSDJ)", "group": "Configuration and settings", "area": "holding", "address": 16032, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting 0"}, {"name": "Pump System delta pressure max (SSDK)", "group": "Configuration and settings", "area": "holding", "address": 16033, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767; Factory setting Refer to programming manual"}, {"name": "Efficiency (EFY)", "group": "Actual values parameters", "area": "holding", "address": 16050, "type": "uint16", "scale": 0.1, "unit": "%", "description": "Range 0.0 % ... 100.0 %"}, {"name": "Highest Efficiency (EFYK)", "group": "Actual values parameters", "area": "holding", "address": 16051, "type": "uint16", "scale": 0.1, "unit": "%", "description": "Range 0.0 % ... 100.0 %"}, {"name": "Lowest Efficiency (EFYJ)", "group": "Actual values parameters", "area": "holding", "address": 16052, "type": "uint16", "scale": 0.1, "unit": "%", "description": "Range 0.0 % ... 100.0 %"}, {"name": "Energy Consumption Indicator (ECI)", "group": "Actual values parameters", "area": "holding", "address": 16053, "type": "int16", "description": "Unit: Refer to programming manual; Range 0 ... 32767"}, {"name": "Energy Performance Indicator (EPI)", "group": "Actual values parameters", "area": "holding", "address": 16054, "type": "int16", "description": "Unit: Refer to programming manual; Range 0 ... 32767"}, {"name": "Highest flow (FS1K)", "group": "Configuration and settings", "area": "holding", "address": 16055, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "LowestFlow (FS1J)", "group": "Configuration and settings", "area": "holding", "address": 16056, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Pump operating point filter (WPXF)", "group": "Configuration and settings", "area": "holding", "address": 16060, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.00 s ... 60.00 s; Factory setting 1.00 s"}, {"name": "Status registers 0 (ST00)", "group": "Status parameters", "area": "holding", "address": 16100, "type": "uint16"}, {"name": "Status registers 1 (ST01)", "group": "Status parameters", "area": "holding", "address": 16101, "type": "uint16"}, {"name": "Status registers 2 (ST02)", "group": "Status parameters", "area": "holding", "address": 16102, "type": "uint16"}, {"name": "Status registers 3 (ST03)", "group": "Status parameters", "area": "holding", "address": 16103, "type": "uint16"}, {"name": "Status registers 4 (ST04)", "group": "Status parameters", "area": "holding", "address": 16104, "type": "uint16"}, {"name": "Status registers 5 (ST05)", "group": "Status parameters", "area": "holding", "address": 16105, "type": "uint16"}, {"name": "Status registers 6 (ST06)", "group": "Status parameters", "area": "holding", "address": 16106, "type": "uint16"}, {"name": "Status registers 7 (ST07)", "group": "Status parameters", "area": "holding", "address": 16107, "type": "uint16"}, {"name": "Status registers 8 (ST08)", "group": "Status parameters", "area": "holding", "address": 16108, "type": "uint16"}, {"name": "Status registers 9 (ST09)", "group": "Status parameters", "area": "holding", "address": 16109, "type": "uint16"}, {"name": "Status registers 11 (ST11)", "group": "Status parameters", "area": "holding", "address": 16111, "type": "uint16"}, {"name": "Status registers 12 (ST12)", "group": "Status parameters", "area": "holding", "address": 16112, "type": "uint16"}, {"name": "Status registers 13 (ST13)", "group": "Status parameters", "area": "holding", "address": 16113, "type": "uint16"}, {"name": "Status registers 14 (ST14)", "group": "Status parameters", "area": "holding", "address": 16114, "type": "uint16"}, {"name": "Status registers 15 (ST15)", "group": "Status parameters", "area": "holding", "address": 16115, "type": "uint16"}, {"name": "Status registers 16 (ST16)", "group": "Status parameters", "area": "holding", "address": 16116, "type": "uint16"}, {"name": "Status registers 17 (ST17)", "group": "Status parameters", "area": "holding", "address": 16117, "type": "uint16"}, {"name": "Status registers 18 (ST18)", "group": "Status parameters", "area": "holding", "address": 16118, "type": "uint16"}, {"name": "Status registers 19 (ST19)", "group": "Status parameters", "area": "holding", "address": 16119, "type": "uint16"}, {"name": "Status registers 20 (ST20)", "group": "Status parameters", "area": "holding", "address": 16120, "type": "uint16"}, {"name": "Configuration of customer warning 1 (CCA1)", "group": "Configuration and settings", "area": "holding", "address": 16200, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not Configured] NO"}, {"name": "Configuration of customer warning 2 (CCA2)", "group": "Configuration and settings", "area": "holding", "address": 16201, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not Configured] NO"}, {"name": "Configuration of customer warning 3 (CCA3)", "group": "Configuration and settings", "area": "holding", "address": 16202, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not Configured] NO"}, {"name": "Configuration of customer warning 4 (CCA4)", "group": "Configuration and settings", "area": "holding", "address": 16203, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not Configured] NO"}, {"name": "Configuration of customer warning 5 (CCA5)", "group": "Configuration and settings", "area": "holding", "address": 16204, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not Configured] NO"}, {"name": "Configuration counter Source 1 (CCS1)", "group": "Configuration and settings", "area": "holding", "address": 16210, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Drive in running State] 2"}, {"name": "Configuration counter Source 2 (CCS2)", "group": "Configuration and settings", "area": "holding", "address": 16211, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Drive in running State] 2"}, {"name": "Configuration counter Source 3 (CCS3)", "group": "Configuration and settings", "area": "holding", "address": 16212, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Drive in running State] 2"}, {"name": "Configuration counter Source 4 (CCS4)", "group": "Configuration and settings", "area": "holding", "address": 16213, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Drive in running State] 2"}, {"name": "Configuration counter Source 5 (CCS5)", "group": "Configuration and settings", "area": "holding", "address": 16214, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Drive in running State] 2"}, {"name": "Date time warning 1 (CDT1)", "group": "Configuration and settings", "area": "holding", "address": 16220, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 2162688 ... 4288616251; Factory setting 2162688"}, {"name": "Date time warning 2 (CDT2)", "group": "Configuration and settings", "area": "holding", "address": 16222, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 2162688 ... 4288616251; Factory setting 2162688"}, {"name": "Date time warning 3 (CDT3)", "group": "Configuration and settings", "area": "holding", "address": 16224, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 2162688 ... 4288616251; Factory setting 2162688"}, {"name": "Date time warning 4 (CDT4)", "group": "Configuration and settings", "area": "holding", "address": 16226, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 2162688 ... 4288616251; Factory setting 2162688"}, {"name": "Date time warning 5 (CDT5)", "group": "Configuration and settings", "area": "holding", "address": 16228, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 2162688 ... 4288616251; Factory setting 2162688"}, {"name": "Configuration counter limit 1 (CCL1)", "group": "Configuration and settings", "area": "holding", "address": 16240, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s; Factory setting 0 s"}, {"name": "Configuration counter limit 2 (CCL2)", "group": "Configuration and settings", "area": "holding", "address": 16242, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s; Factory setting 0 s"}, {"name": "Configuration counter limit 3 (CCL3)", "group": "Configuration and settings", "area": "holding", "address": 16244, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s; Factory setting 0 s"}, {"name": "Configuration counter limit 4 (CCL4)", "group": "Configuration and settings", "area": "holding", "address": 16246, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s; Factory setting 0 s"}, {"name": "Configuration counter limit 5 (CCL5)", "group": "Configuration and settings", "area": "holding", "address": 16248, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s; Factory setting 0 s"}, {"name": "Time counter 1 (CC1)", "group": "Actual values parameters", "area": "holding", "address": 16260, "type": "uint32", "unit": "s", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 s ... 4294967295 s"}, {"name": "Time counter 2 (CC2)", "group": "Actual values parameters", "area": "holding", "address": 16262, "type": "uint32", "unit": "s", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 s ... 4294967295 s"}, {"name": "Time counter 3 (CC3)", "group": "Actual values parameters", "area": "holding", "address": 16264, "type": "uint32", "unit": "s", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 s ... 4294967295 s"}, {"name": "Time counter 4 (CC4)", "group": "Actual values parameters", "area": "holding", "address": 16266, "type": "uint32", "unit": "s", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 s ... 4294967295 s"}, {"name": "Time counter 5 (CC5)", "group": "Actual values parameters", "area": "holding", "address": 16268, "type": "uint32", "unit": "s", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 s ... 4294967295 s"}, {"name": "Customer warning clearing (CAR)", "group": "Configuration and settings", "area": "holding", "address": 16280, "type": "uint16", "access": "RW", "enum": {"0": "No warning clearing", "1": "Clear Event 1 warning", "2": "Clear Event 2 warning", "3": "Clear Event 3 warning", "4": "Clear Event 4 warning", "5": "Clear Event 5 warning"}, "description": "Factory setting [No warning clearing] NO"}, {"name": "Log Distribution Data 1 (LDD1)", "group": "Configuration and settings", "area": "holding", "address": 16400, "type": "uint16", "access": "RW", "description": "Factory setting [Distribution logging disable] NO"}, {"name": "Distribution data max value 1 (LDM1)", "group": "Configuration and settings", "area": "holding", "address": 16401, "type": "uint16", "access": "RW", "description": "Range 10 ... 65535; Factory setting Refer to programming manual"}, {"name": "Log Distribution Data 2 (LDD2)", "group": "Configuration and settings", "area": "holding", "address": 16402, "type": "uint16", "access": "RW", "description": "Factory setting [Distribution logging disable] NO"}, {"name": "Distribution data max value 2 (LDM2)", "group": "Configuration and settings", "area": "holding", "address": 16403, "type": "uint16", "access": "RW", "description": "Range 10 ... 65535; Factory setting Refer to programming manual"}, {"name": "Log Distribution Data 3 (LDD3)", "group": "Configuration and settings", "area": "holding", "address": 16404, "type": "uint16", "access": "RW", "description": "Factory setting [Distribution logging disable] NO"}, {"name": "Distribution data max value 3 (LDM3)", "group": "Configuration and settings", "area": "holding", "address": 16405, "type": "uint16", "access": "RW", "description": "Range 10 ... 65535; Factory setting Refer to programming manual"}, {"name": "Log Distribution Data 4 (LDD4)", "group": "Configuration and settings", "area": "holding", "address": 16406, "type": "uint16", "access": "RW", "description": "Factory setting [Distribution logging disable] NO"}, {"name": "Distribution data max value 4 (LDM4)", "group": "Configuration and settings", "area": "holding", "address": 16407, "type": "uint16", "access": "RW", "description": "Range 10 ... 65535; Factory setting Refer to programming manual"}, {"name": "Logging Distribution Sample time (LDST)", "group": "Configuration and settings", "area": "holding", "address": 16408, "type": "uint16", "access": "RW", "enum": {"2": "200 ms", "10": "1 second", "20": "2 seconds", "50": "5 seconds"}, "description": "Factory setting [1 second] 1S"}, {"name": "Logging Distribution State (LDEN)", "group": "Configuration and settings", "area": "holding", "address": 16409, "type": "uint16", "access": "RW", "enum": {"0": "Stop", "1": "Start", "2": "Always", "3": "Reset", "4": "Clear", "5": "Error"}, "description": "Factory setting [Stop] STOP"}, {"name": "Pump System architecture selection (MPSA)", "group": "Configuration and settings", "area": "holding", "address": 16500, "type": "uint16", "access": "RW", "enum": {"0": "Mono-Pump", "1": "Single Drive", "2": "Multiple Drives", "3": "Multiple Drives with Master redundancy"}, "description": "Writable only when the motor is stopped; Factory setting [Mono-Pump] NO"}, {"name": "Number of Multipump devices (MPGN)", "group": "Configuration and settings", "area": "holding", "address": 16501, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 6; Factory setting 1"}, {"name": "Multipump device ID selection (MGID)", "group": "Configuration and settings", "area": "holding", "address": 16502, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 6; Factory setting 0"}, {"name": "Number of pumps (MPPN)", "group": "Configuration and settings", "area": "holding", "address": 16503, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 1 ... 32767; Factory setting 1"}, {"name": "Multipump speed mode selection (MPST)", "group": "Configuration and settings", "area": "holding", "address": 16504, "type": "uint16", "access": "RW", "enum": {"0": "Standard multipump speed control mode", "1": "Distributed multipump speed control mode", "2": "Advanced multipump speed control mode", "3": "Synchronized multipump speed control mode"}, "description": "Writable only when the motor is stopped; Factory setting [Standard multipump speed control mode] TMC"}, {"name": "Pump cycling mode (MPPC)", "group": "Configuration and settings", "area": "holding", "address": 16505, "type": "uint16", "access": "RW", "enum": {"0": "First In First Out", "1": "Last In First Out", "2": "Pump runtime", "3": "Runtime&Last In First Out"}, "description": "Writable only when the motor is stopped; Factory setting [Pump runtime] RTIME"}, {"name": "Lead pump alternation (MPLA)", "group": "Configuration and settings", "area": "holding", "address": 16506, "type": "uint16", "access": "RW", "enum": {"0": "Deactivated", "1": "Standard alternation", "2": "Redundancy mode"}, "description": "Writable only when the motor is stopped; Factory setting [Deactivated] NO"}, {"name": "Pump ready delay (MPID)", "group": "Configuration and settings", "area": "holding", "address": 16507, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 3600 s; Factory setting 0 s"}, {"name": "Response to Multipump error (MPFB)", "group": "Configuration and settings", "area": "holding", "address": 16508, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "MultiPump function state (MPS)", "group": "Status parameters", "area": "holding", "address": 16509, "type": "uint16", "enum": {"0": "None", "1": "Ready", "2": "Running", "3": "warning", "4": "Error", "5": "Not available"}}, {"name": "Pump 1 ready to operate assignment (MPI1)", "group": "Configuration and settings", "area": "holding", "address": 16511, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Pump 2 ready to operate assignment (MPI2)", "group": "Configuration and settings", "area": "holding", "address": 16512, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Pump 3 ready to operate assignment (MPI3)", "group": "Configuration and settings", "area": "holding", "address": 16513, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Pump 4 ready to operate assignment (MPI4)", "group": "Configuration and settings", "area": "holding", "address": 16514, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Pump 5 ready to operate assignment (MPI5)", "group": "Configuration and settings", "area": "holding", "address": 16515, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Pump 6 ready to operate assignment (MPI6)", "group": "Configuration and settings", "area": "holding", "address": 16516, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Multi-pump master enable assignment (MPME)", "group": "Configuration and settings", "area": "holding", "address": 16520, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Command assignment for pump 1 (MPO1)", "group": "Configuration and settings", "area": "holding", "address": 16521, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Command assignment for pump 2 (MPO2)", "group": "Configuration and settings", "area": "holding", "address": 16522, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Command assignment for pump 3 (MPO3)", "group": "Configuration and settings", "area": "holding", "address": 16523, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Command assignment for pump 4 (MPO4)", "group": "Configuration and settings", "area": "holding", "address": 16524, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Command assignment for pump 5 (MPO5)", "group": "Configuration and settings", "area": "holding", "address": 16525, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Command assignment for pump 6 (MPO6)", "group": "Configuration and settings", "area": "holding", "address": 16526, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Multi-pump master activated assignment (MPMA)", "group": "Configuration and settings", "area": "holding", "address": 16530, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped"}, {"name": "Multi-pump master activation delay (MPMD)", "group": "Configuration and settings", "area": "holding", "address": 16540, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 99.9 s; Factory setting 0.0 s"}, {"name": "Pump 1 Type (P1T)", "group": "Status parameters", "area": "holding", "address": 16541, "type": "uint16"}, {"name": "Pump 2 Type (P2T)", "group": "Status parameters", "area": "holding", "address": 16542, "type": "uint16"}, {"name": "Pump 3 Type (P3T)", "group": "Status parameters", "area": "holding", "address": 16543, "type": "uint16"}, {"name": "Pump 4 Type (P4T)", "group": "Status parameters", "area": "holding", "address": 16544, "type": "uint16"}, {"name": "Pump 5 Type (P5T)", "group": "Status parameters", "area": "holding", "address": 16545, "type": "uint16"}, {"name": "Pump 6 Type (P6T)", "group": "Status parameters", "area": "holding", "address": 16546, "type": "uint16"}, {"name": "MultiDrive Link pairing code (MDPC)", "group": "Configuration and settings", "area": "holding", "address": 16549, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 255; Factory setting 0"}, {"name": "Multi-pump power-on master delay (MPPD)", "group": "Configuration and settings", "area": "holding", "address": 16550, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 120 s; Factory setting 30 s"}, {"name": "Pump 1 State (P1S)", "group": "Status parameters", "area": "holding", "address": 16551, "type": "uint16"}, {"name": "Pump 2 State (P2S)", "group": "Status parameters", "area": "holding", "address": 16552, "type": "uint16"}, {"name": "Pump 3 State (P3S)", "group": "Status parameters", "area": "holding", "address": 16553, "type": "uint16"}, {"name": "Pump 4 State (P4S)", "group": "Status parameters", "area": "holding", "address": 16554, "type": "uint16"}, {"name": "Pump 5 State (P5S)", "group": "Status parameters", "area": "holding", "address": 16555, "type": "uint16"}, {"name": "Pump 6 State (P6S)", "group": "Status parameters", "area": "holding", "address": 16556, "type": "uint16"}, {"name": "Active master ID (MMID)", "group": "Status parameters", "area": "holding", "address": 16559, "type": "uint16"}, {"name": "Pump 1 number of starts (P1NS)", "group": "Configuration and settings", "area": "holding", "address": 16560, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 ... 4294967295"}, {"name": "Pump 2 number of starts (P2NS)", "group": "Configuration and settings", "area": "holding", "address": 16562, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 ... 4294967295"}, {"name": "Pump 3 number of starts (P3NS)", "group": "Configuration and settings", "area": "holding", "address": 16564, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 ... 4294967295"}, {"name": "Pump 4 number of starts (P4NS)", "group": "Configuration and settings", "area": "holding", "address": 16566, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 ... 4294967295"}, {"name": "Pump 5 number of starts (P5NS)", "group": "Configuration and settings", "area": "holding", "address": 16568, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 ... 4294967295"}, {"name": "Pump 6 number of starts (P6NS)", "group": "Configuration and settings", "area": "holding", "address": 16570, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 ... 4294967295"}, {"name": "Pump 1 running time (P1OT)", "group": "Configuration and settings", "area": "holding", "address": 16572, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s"}, {"name": "Pump 2 running time (P2OT)", "group": "Configuration and settings", "area": "holding", "address": 16574, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s"}, {"name": "Pump 3 running time (P3OT)", "group": "Configuration and settings", "area": "holding", "address": 16576, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s"}, {"name": "Pump 4 running time (P4OT)", "group": "Configuration and settings", "area": "holding", "address": 16578, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s"}, {"name": "Pump 5 running time (P5OT)", "group": "Configuration and settings", "area": "holding", "address": 16580, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s"}, {"name": "Pump 6 running time (P6OT)", "group": "Configuration and settings", "area": "holding", "address": 16582, "type": "uint32", "unit": "s", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Writable only when the motor is stopped; Range 0 s ... 4294967295 s"}, {"name": "Response to Multi-Drive Link communication error (MDLB)", "group": "Configuration and settings", "area": "holding", "address": 16588, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "Response to multipump device error (MPDB)", "group": "Configuration and settings", "area": "holding", "address": 16589, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "Number of available pumps (MPAN)", "group": "Status parameters", "area": "holding", "address": 16590, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Number of staged pumps (MPSN)", "group": "Status parameters", "area": "holding", "address": 16591, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Next Staged pump (PNTS)", "group": "Status parameters", "area": "holding", "address": 16594, "type": "uint16"}, {"name": "Next Destaged pump (PNTD)", "group": "Status parameters", "area": "holding", "address": 16595, "type": "uint16"}, {"name": "Lead pump (PLID)", "group": "Status parameters", "area": "holding", "address": 16596, "type": "uint16"}, {"name": "Multipump master or slave selection (MPDT)", "group": "Configuration and settings", "area": "holding", "address": 16597, "type": "uint16", "access": "RW", "enum": {"0": "Slave", "1": "Master", "2": "Master only", "3": "Master or slave"}, "description": "Writable only when the motor is stopped; Factory setting [Slave] SLAVE"}, {"name": "Pump fixed frequency in distributed mode (MPFS)", "group": "Configuration and settings", "area": "holding", "address": 16598, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Pump auto cycling (MPCP)", "group": "Configuration and settings", "area": "holding", "address": 16599, "type": "uint16", "scale": 0.1, "unit": "h", "access": "RW", "description": "Range 0.0 h ... 24.0 h; Factory setting 0.0 h"}, {"name": "Booster Control (BCM)", "group": "Configuration and settings", "area": "holding", "address": 16600, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Booster stage/destage time interval (BSDT)", "group": "Configuration and settings", "area": "holding", "address": 16601, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 999.9 s; Factory setting 15.0 s"}, {"name": "Booster Status (BCS)", "group": "Status parameters", "area": "holding", "address": 16602, "type": "uint16", "enum": {"0": "Not configured", "1": "Inactive", "2": "Running", "3": "Stage Pending", "4": "Destage pending", "5": "Staging", "6": "Destage in progress"}}, {"name": "Booster number of pumps (BCPN)", "group": "Configuration and settings", "area": "holding", "address": 16603, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 6; Factory setting 0"}, {"name": "Booster stage/destage condition (BSDC)", "group": "Configuration and settings", "area": "holding", "address": 16610, "type": "uint16", "access": "RW", "enum": {"0": "Speed", "1": "Feedback", "2": "Speed+Flow", "3": "Feedback+Flow", "5": "Energy Optimized"}, "description": "Writable only when the motor is stopped; Factory setting [Feedback] FBK"}, {"name": "Booster stage speed (BSS)", "group": "Configuration and settings", "area": "holding", "address": 16611, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Booster destage speed (BDS)", "group": "Configuration and settings", "area": "holding", "address": 16612, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Booster stage delay (BSD)", "group": "Configuration and settings", "area": "holding", "address": 16613, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 999.9 s; Factory setting 10.0 s"}, {"name": "Booster destage delay (BDD)", "group": "Configuration and settings", "area": "holding", "address": 16614, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 999.9 s; Factory setting 10.0 s"}, {"name": "Booster working range (BCWA)", "group": "Configuration and settings", "area": "holding", "address": 16615, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 1.0 % ... 100.0 %; Factory setting 2.0 %"}, {"name": "Booster override range (BCOA)", "group": "Configuration and settings", "area": "holding", "address": 16616, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Booster destage flow (BDF)", "group": "Configuration and settings", "area": "holding", "address": 16617, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Booster stage/destage control (BSDM)", "group": "Configuration and settings", "area": "holding", "address": 16620, "type": "uint16", "access": "RW", "enum": {"0": "Speed", "1": "Feedback", "2": "Advanced"}, "description": "Writable only when the motor is stopped; Factory setting [Feedback] BFBK"}, {"name": "Booster stage bypass speed (BSBS)", "group": "Configuration and settings", "area": "holding", "address": 16621, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Booster stage bypass time (BSBT)", "group": "Configuration and settings", "area": "holding", "address": 16622, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 999.9 s; Factory setting 3.0 s"}, {"name": "Booster stage ramp delay (BSRD)", "group": "Configuration and settings", "area": "holding", "address": 16623, "type": "int16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 999.9 s; Factory setting 1.0 s"}, {"name": "Booster destage bypass speed (BDBS)", "group": "Configuration and settings", "area": "holding", "address": 16624, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Booster destage bypass time (BDBT)", "group": "Configuration and settings", "area": "holding", "address": 16625, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 999.9 s; Factory setting 1.0 s"}, {"name": "Booster destage ramp delay (BDRD)", "group": "Configuration and settings", "area": "holding", "address": 16626, "type": "int16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 999.9 s; Factory setting 0.0 s"}, {"name": "Feed forward stage delay (FFSD)", "group": "Configuration and settings", "area": "holding", "address": 16627, "type": "int16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 999.9 s; Factory setting 1.0 s"}, {"name": "Feed forward destage delay (FFDD)", "group": "Configuration and settings", "area": "holding", "address": 16628, "type": "int16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 999.9 s; Factory setting 0.0 s"}, {"name": "Booster stage/destage flow hysteresis (BSDH)", "group": "Configuration and settings", "area": "holding", "address": 16629, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 3.0 %"}, {"name": "Level control mode (LCM)", "group": "Configuration and settings", "area": "holding", "address": 16630, "type": "uint16", "access": "RW", "enum": {"0": "Deactivated", "1": "Filling mode", "2": "Emptying mode"}, "description": "Writable only when the motor is stopped; Factory setting [Deactivated] NO"}, {"name": "Level control sensor type (LCNT)", "group": "Configuration and settings", "area": "holding", "address": 16631, "type": "uint16", "access": "RW", "enum": {"0": "Level switches", "1": "Level sensor", "2": "Pressure sensor"}, "description": "Writable only when the motor is stopped; Factory setting [Level switches] SW"}, {"name": "Level control strategy (LCST)", "group": "Configuration and settings", "area": "holding", "address": 16632, "type": "uint16", "access": "RW", "enum": {"0": "Switches", "1": "Standard", "2": "Energy Optimized"}, "description": "Writable only when the motor is stopped; Factory setting [Switches] TRAD"}, {"name": "Level control random factor (LCRX)", "group": "Configuration and settings", "area": "holding", "address": 16633, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Tank volume to be filled or emptied (LCTV)", "group": "Configuration and settings", "area": "holding", "address": 16634, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Level control low speed (LCLS)", "group": "Configuration and settings", "area": "holding", "address": 16635, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Range 0.0 Hz ... 500.0 Hz; Factory setting 35.0 Hz"}, {"name": "Level control stop mode (LCPM)", "group": "Configuration and settings", "area": "holding", "address": 16636, "type": "uint16", "access": "RW", "enum": {"0": "All pumps stopped simultaneously", "1": "Each pump stopped individually"}, "description": "Writable only when the motor is stopped; Factory setting [Each pump stopped individually] INDIV"}, {"name": "Level control error response (LCFB)", "group": "Configuration and settings", "area": "holding", "address": 16637, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "Minimum level switch assignment (LCWL)", "group": "Configuration and settings", "area": "holding", "address": 16638, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Maximum level switch assignment (LCWH)", "group": "Configuration and settings", "area": "holding", "address": 16639, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Level Control Status (LCS)", "group": "Status parameters", "area": "holding", "address": 16640, "type": "uint16", "enum": {"0": "Not configured", "1": "Inactive", "2": "Filling in progress", "3": "Emptying in progress", "4": "Low level", "5": "High level"}}, {"name": "Empty Tank level sensor value (LCTJ)", "group": "Configuration and settings", "area": "holding", "address": 16641, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "Full Tank level sensor value (LCTK)", "group": "Configuration and settings", "area": "holding", "address": 16642, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "Tank level (LCTL)", "group": "Status parameters", "area": "holding", "address": 16643, "type": "uint16", "scale": 0.1, "unit": "%", "description": "Range 0.0 % ... 100.0 %"}, {"name": "Number of pumps used in level control (LCPN)", "group": "Configuration and settings", "area": "holding", "address": 16650, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 ... 6; Factory setting 0"}, {"name": "Level switch 1 assignment (LCW1)", "group": "Configuration and settings", "area": "holding", "address": 16651, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Level switch 2 assignment (LCW2)", "group": "Configuration and settings", "area": "holding", "address": 16652, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Level switch 3 assignment (LCW3)", "group": "Configuration and settings", "area": "holding", "address": 16653, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Level switch 4 assignment (LCW4)", "group": "Configuration and settings", "area": "holding", "address": 16654, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Level switch 5 assignment (LCW5)", "group": "Configuration and settings", "area": "holding", "address": 16655, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Level switch 6 assignment (LCW6)", "group": "Configuration and settings", "area": "holding", "address": 16656, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Level to start first pump (LRL1)", "group": "Configuration and settings", "area": "holding", "address": 16661, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to start second pump (LRL2)", "group": "Configuration and settings", "area": "holding", "address": 16662, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to start third pump (LRL3)", "group": "Configuration and settings", "area": "holding", "address": 16663, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to start fourth pump (LRL4)", "group": "Configuration and settings", "area": "holding", "address": 16664, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to start fifth pump (LRL5)", "group": "Configuration and settings", "area": "holding", "address": 16665, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to start sixth pump (LRL6)", "group": "Configuration and settings", "area": "holding", "address": 16666, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level control disturbed level sample size (LCNB)", "group": "Configuration and settings", "area": "holding", "address": 16667, "type": "uint16", "access": "RW", "description": "Range 2 ... 20; Factory setting 10"}, {"name": "Level control system friction loss rate (LCLF)", "group": "Configuration and settings", "area": "holding", "address": 16668, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level control real tank level (LCFV)", "group": "Status parameters", "area": "holding", "address": 16669, "type": "int16", "description": "Unit: Refer to programming manual; Range -32767 ... 32767"}, {"name": "Level control disturbed flow filter time (LCQF)", "group": "Configuration and settings", "area": "holding", "address": 16670, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.00 s ... 99.99 s; Factory setting 10.00 s"}, {"name": "Level to stop first pump (LPL1)", "group": "Configuration and settings", "area": "holding", "address": 16671, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to stop second pump (LPL2)", "group": "Configuration and settings", "area": "holding", "address": 16672, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to stop third pump (LPL3)", "group": "Configuration and settings", "area": "holding", "address": 16673, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to stop fourth pump (LPL4)", "group": "Configuration and settings", "area": "holding", "address": 16674, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to stop fifth pump (LPL5)", "group": "Configuration and settings", "area": "holding", "address": 16675, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to stop sixth pump (LPL6)", "group": "Configuration and settings", "area": "holding", "address": 16676, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level control flow stabilization threshold (LCDF)", "group": "Configuration and settings", "area": "holding", "address": 16677, "type": "int16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 1.0 %"}, {"name": "Level to reach first pump high speed (LHL1)", "group": "Configuration and settings", "area": "holding", "address": 16681, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to reach second pump high speed (LHL2)", "group": "Configuration and settings", "area": "holding", "address": 16682, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to reach third pump high speed (LHL3)", "group": "Configuration and settings", "area": "holding", "address": 16683, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to reach fourth pump high speed (LHL4)", "group": "Configuration and settings", "area": "holding", "address": 16684, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to reach fifth pump high speed (LHL5)", "group": "Configuration and settings", "area": "holding", "address": 16685, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Level to reach sixth pump high speed (LHL6)", "group": "Configuration and settings", "area": "holding", "address": 16686, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 100.0 %; Factory setting 0.0 %"}, {"name": "Minimum delivery height (LCDJ)", "group": "Configuration and settings", "area": "holding", "address": 16687, "type": "uint16", "scale": 0.01, "unit": "m", "access": "RW", "description": "Range 0.00 m ... 327.67 m; Factory setting 0.00 m"}, {"name": "Maximum delivery height (LCDK)", "group": "Configuration and settings", "area": "holding", "address": 16688, "type": "uint16", "scale": 0.01, "unit": "m", "access": "RW", "description": "Range 0.00 m ... 327.67 m; Factory setting 0.00 m"}, {"name": "Disturbance flow compensation (LCQG)", "group": "Configuration and settings", "area": "holding", "address": 16691, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 200.0 %; Factory setting 100.0 %"}, {"name": "Disturbance flow response time (LCQT)", "group": "Configuration and settings", "area": "holding", "address": 16692, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.00 s ... 99.99 s; Factory setting 5.00 s"}, {"name": "Level control level filter time (LCVF)", "group": "Configuration and settings", "area": "holding", "address": 16693, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.00 s ... 99.99 s; Factory setting 10.00 s"}, {"name": "Level Control stage/destage interval (LCDT)", "group": "Configuration and settings", "area": "holding", "address": 16696, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 999.9 s; Factory setting 15.0 s"}, {"name": "Level control PI integral time (LCTI)", "group": "Configuration and settings", "area": "holding", "address": 16697, "type": "uint16", "scale": 0.01, "unit": "s", "access": "RW", "description": "Range 0.00 s ... 99.99 s; Factory setting 5.00 s"}, {"name": "Level control PI proportional gain (LCKP)", "group": "Configuration and settings", "area": "holding", "address": 16698, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Range 0.0 % ... 200.0 %; Factory setting 70.0 %"}, {"name": "Monitoring circuit A assignment (IFAA)", "group": "Configuration and settings", "area": "holding", "address": 16700, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Monitoring circuit B assignment (IFAB)", "group": "Configuration and settings", "area": "holding", "address": 16701, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Monitoring circuit C assignment (IFAC)", "group": "Configuration and settings", "area": "holding", "address": 16702, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Monitoring circuit D assignment (IFAD)", "group": "Configuration and settings", "area": "holding", "address": 16703, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Cabinet circuit A assignment (CFAA)", "group": "Configuration and settings", "area": "holding", "address": 16704, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Cabinet circuit B assignment (CFAB)", "group": "Configuration and settings", "area": "holding", "address": 16705, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Cabinet circuit C assignment (CFAC)", "group": "Configuration and settings", "area": "holding", "address": 16706, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Motor winding A assignment (TFAA)", "group": "Configuration and settings", "area": "holding", "address": 16707, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Motor winding B assignment (TFAB)", "group": "Configuration and settings", "area": "holding", "address": 16708, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Motor bearing A assignment (TFAC)", "group": "Configuration and settings", "area": "holding", "address": 16709, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Motor bearing B assignment (TFAD)", "group": "Configuration and settings", "area": "holding", "address": 16710, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Cabinet I/O 24V missing error timeout (P24D)", "group": "Configuration and settings", "area": "holding", "address": 16714, "type": "int16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range -1 s ... 3000 s; Factory setting Refer to programming manual"}, {"name": "Monitoring circuit A error monitoring type (IFMA)", "group": "Configuration and settings", "area": "holding", "address": 16720, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Always active] ALL"}, {"name": "Monitoring circuit B error monitoring type (IFMB)", "group": "Configuration and settings", "area": "holding", "address": 16721, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Always active] ALL"}, {"name": "Monitoring circuit C error monitoring type (IFMC)", "group": "Configuration and settings", "area": "holding", "address": 16722, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Always active] ALL"}, {"name": "Monitoring circuit D error monitoring type (IFMD)", "group": "Configuration and settings", "area": "holding", "address": 16723, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Always active] ALL"}, {"name": "Cabinet circuit A monitoring type (CFMA)", "group": "Configuration and settings", "area": "holding", "address": 16724, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Always active] ALL"}, {"name": "Cabinet circuit B monitoring type (CFMB)", "group": "Configuration and settings", "area": "holding", "address": 16725, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Always active] ALL"}, {"name": "Cabinet circuit C monitoring type (CFMC)", "group": "Configuration and settings", "area": "holding", "address": 16726, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Always active] ALL"}, {"name": "Motor winding A monitoring (TFMA)", "group": "Configuration and settings", "area": "holding", "address": 16727, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Always active] ALL"}, {"name": "Motor winding B monitoring (TFMB)", "group": "Configuration and settings", "area": "holding", "address": 16728, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Always active] ALL"}, {"name": "Motor bearing A monitoring (TFMC)", "group": "Configuration and settings", "area": "holding", "address": 16729, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Always active] ALL"}, {"name": "Motor bearing B monitoring (TFMD)", "group": "Configuration and settings", "area": "holding", "address": 16730, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Always active] ALL"}, {"name": "Monitoring circuit A delay after Run (IFDA)", "group": "Configuration and settings", "area": "holding", "address": 16740, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 300 s; Factory setting 0 s"}, {"name": "Monitoring circuit B delay after Run (IFDB)", "group": "Configuration and settings", "area": "holding", "address": 16741, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 300 s; Factory setting 0 s"}, {"name": "Monitoring circuit C delay after Run (IFDC)", "group": "Configuration and settings", "area": "holding", "address": 16742, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 300 s; Factory setting 0 s"}, {"name": "Monitoring circuit D delay after Run (IFDD)", "group": "Configuration and settings", "area": "holding", "address": 16743, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 300 s; Factory setting 0 s"}, {"name": "Cabinet circuit A delay after Run (CFDA)", "group": "Configuration and settings", "area": "holding", "address": 16744, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 300 s; Factory setting 0 s"}, {"name": "Cabinet circuit B delay after Run (CFDB)", "group": "Configuration and settings", "area": "holding", "address": 16745, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 300 s; Factory setting 0 s"}, {"name": "Cabinet circuit C delay after Run (CFDC)", "group": "Configuration and settings", "area": "holding", "address": 16746, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 300 s; Factory setting 0 s"}, {"name": "Motor winding A delay after Run (TFDA)", "group": "Configuration and settings", "area": "holding", "address": 16747, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 300 s; Factory setting 0 s"}, {"name": "Motor winding B delay after Run (TFDB)", "group": "Configuration and settings", "area": "holding", "address": 16748, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 300 s; Factory setting 0 s"}, {"name": "Motor bearing A delay after Run (TFDC)", "group": "Configuration and settings", "area": "holding", "address": 16749, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 300 s; Factory setting 0 s"}, {"name": "Motor bearing B delay after Run (TFDD)", "group": "Configuration and settings", "area": "holding", "address": 16750, "type": "uint16", "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0 s ... 300 s; Factory setting 0 s"}, {"name": "Response to monitoring circuit A error (IFRA)", "group": "Configuration and settings", "area": "holding", "address": 16760, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to monitoring circuit B error (IFRB)", "group": "Configuration and settings", "area": "holding", "address": 16761, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to monitoring circuit C error (IFRC)", "group": "Configuration and settings", "area": "holding", "address": 16762, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to monitoring circuit D error (IFRD)", "group": "Configuration and settings", "area": "holding", "address": 16763, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to cabinet circuit A error (CFRA)", "group": "Configuration and settings", "area": "holding", "address": 16764, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to cabinet circuit B error (CFRB)", "group": "Configuration and settings", "area": "holding", "address": 16765, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to cabinet circuit C error (CFRC)", "group": "Configuration and settings", "area": "holding", "address": 16766, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to motor winding A error (TFRA)", "group": "Configuration and settings", "area": "holding", "address": 16767, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to motor winding B error (TFRB)", "group": "Configuration and settings", "area": "holding", "address": 16768, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to motor bearing A error (TFRC)", "group": "Configuration and settings", "area": "holding", "address": 16769, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Response to motor bearing B error (TFRD)", "group": "Configuration and settings", "area": "holding", "address": 16770, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Freewheel stop] YES"}, {"name": "Vortex control activation (VCM)", "group": "Configuration and settings", "area": "holding", "address": 17300, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Vortex control status (VCCS)", "group": "Status parameters", "area": "holding", "address": 17301, "type": "uint16", "enum": {"0": "Not configured", "1": "Inactive", "2": "Pending", "3": "Running", "4": "Runs with warning", "5": "Error"}}, {"name": "Curve learning mode (VCLM)", "group": "Configuration and settings", "area": "holding", "address": 17302, "type": "uint16", "access": "RW", "enum": {"0": "Preset curve mode", "1": "Learnt curve mode"}, "description": "Writable only when the motor is stopped; Factory setting [Preset curve mode] PSET"}, {"name": "Curve learning status (VCLS)", "group": "Status parameters", "area": "holding", "address": 17303, "type": "uint16", "enum": {"0": "Not configured", "1": "Preset value mode", "2": "Inactive", "3": "Pending", "4": "Running", "5": "Error", "6": "Succeeded"}}, {"name": "Learning activation assignment (VCLA)", "group": "Configuration and settings", "area": "holding", "address": 17304, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Yes] YES"}, {"name": "Low learning speed (VCSJ)", "group": "Configuration and settings", "area": "holding", "address": 17305, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "High learning speed (VCSK)", "group": "Configuration and settings", "area": "holding", "address": 17306, "type": "uint16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting Refer to programming manual"}, {"name": "Learning stabilization time (VCST)", "group": "Configuration and settings", "area": "holding", "address": 17307, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 1.0 s ... 100.0 s; Factory setting 3.0 s"}, {"name": "Learnt speed #1 (VCS1)", "group": "Configuration and settings", "area": "holding", "address": 17310, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Learnt speed #2 (VCS2)", "group": "Configuration and settings", "area": "holding", "address": 17311, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Learnt speed #3 (VCS3)", "group": "Configuration and settings", "area": "holding", "address": 17312, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Learnt speed #4 (VCS4)", "group": "Configuration and settings", "area": "holding", "address": 17313, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Learnt speed #5 (VCS5)", "group": "Configuration and settings", "area": "holding", "address": 17314, "type": "int16", "scale": 0.1, "unit": "Hz", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 Hz ... 500.0 Hz; Factory setting 0.0 Hz"}, {"name": "Learnt power #1 (VCP1)", "group": "Configuration and settings", "area": "holding", "address": 17320, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Learnt power #2 (VCP2)", "group": "Configuration and settings", "area": "holding", "address": 17321, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Learnt power #3 (VCP3)", "group": "Configuration and settings", "area": "holding", "address": 17322, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Learnt power #4 (VCP4)", "group": "Configuration and settings", "area": "holding", "address": 17323, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Learnt power #5 (VCP5)", "group": "Configuration and settings", "area": "holding", "address": 17324, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range 0 ... 32767; Factory setting 0"}, {"name": "Vortex control disable DI assignment (VCDA)", "group": "Configuration and settings", "area": "holding", "address": 17330, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "Power vs Speed curve sensitivity gain (VCAX)", "group": "Configuration and settings", "area": "holding", "address": 17331, "type": "uint16", "unit": "%", "access": "RW", "description": "Range 0 % ... 200 %; Factory setting 95 %"}, {"name": "Power vs Speed curve sensitivity offset (VCAY)", "group": "Configuration and settings", "area": "holding", "address": 17332, "type": "uint16", "access": "RW", "description": "Unit: Refer to programming manual; Range 0 ... 32767; Factory setting 0"}, {"name": "Vortex control proportional gain (VCKP)", "group": "Configuration and settings", "area": "holding", "address": 17333, "type": "uint16", "scale": 0.01, "access": "RW", "description": "Range 0.01 ... 2.00; Factory setting 1.00"}, {"name": "Vortex control integral constant time (VCTI)", "group": "Configuration and settings", "area": "holding", "address": 17334, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 100.0 s; Factory setting 0.5 s"}, {"name": "Vortex control error behavior (VCFB)", "group": "Configuration and settings", "area": "holding", "address": 17335, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Ramp stop] RMP"}, {"name": "Vortex control error delay (VCFD)", "group": "Configuration and settings", "area": "holding", "address": 17336, "type": "uint16", "unit": "s", "access": "RW", "description": "Range 0 s ... 60 s; Factory setting 10 s"}, {"name": "Enable relay 3 fallback (R3F)", "group": "Configuration and settings", "area": "holding", "address": 17600, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Enable relay 4 fallback (R4F)", "group": "Configuration and settings", "area": "holding", "address": 17601, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Enable relay 5 fallback (R5F)", "group": "Configuration and settings", "area": "holding", "address": 17602, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Enable relay 6 fallback (R6F)", "group": "Configuration and settings", "area": "holding", "address": 17603, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Enable DQ11 fallback (D11F)", "group": "Configuration and settings", "area": "holding", "address": 17605, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Enable DQ12 fallback (D12F)", "group": "Configuration and settings", "area": "holding", "address": 17606, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Runtime status (DSTA)", "group": "Status parameters", "area": "holding", "address": 17805, "type": "uint16", "enum": {"0": "Stopped", "1": "Cold starting", "2": "Warm starting", "3": "Parsing", "4": "Cleaning", "5": "Ready", "6": "Running", "7": "Preparing for online change", "8": "Parsing online change data", "9": "Online change swap", "10": "Cleaning after online change", "11": "Rolling back online change", "12": "Error stopped", "13": "Clean stopped", "14": "Removing and restoring persistent data", "15": "Unknown"}}, {"name": "dPAC Exchange 0 (DEP0)", "group": "Actual values parameters", "area": "holding", "address": 17810, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 1 (DEP1)", "group": "Actual values parameters", "area": "holding", "address": 17811, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 2 (DEP2)", "group": "Actual values parameters", "area": "holding", "address": 17812, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 3 (DEP3)", "group": "Actual values parameters", "area": "holding", "address": 17813, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 4 (DEP4)", "group": "Actual values parameters", "area": "holding", "address": 17814, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 5 (DEP5)", "group": "Actual values parameters", "area": "holding", "address": 17815, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 6 (DEP6)", "group": "Actual values parameters", "area": "holding", "address": 17816, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 7 (DEP7)", "group": "Actual values parameters", "area": "holding", "address": 17817, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 8 (DEP8)", "group": "Actual values parameters", "area": "holding", "address": 17818, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 9 (DEP9)", "group": "Actual values parameters", "area": "holding", "address": 17819, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 10 (DEPA)", "group": "Actual values parameters", "area": "holding", "address": 17820, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 11 (DEPB)", "group": "Actual values parameters", "area": "holding", "address": 17821, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 12 (DEPC)", "group": "Actual values parameters", "area": "holding", "address": 17822, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 13 (DEPD)", "group": "Actual values parameters", "area": "holding", "address": 17823, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 14 (DEPE)", "group": "Actual values parameters", "area": "holding", "address": 17824, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 15 (DEPF)", "group": "Actual values parameters", "area": "holding", "address": 17825, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 16 (DEPG)", "group": "Actual values parameters", "area": "holding", "address": 17826, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 17 (DEPH)", "group": "Actual values parameters", "area": "holding", "address": 17827, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 18 (DEPI)", "group": "Actual values parameters", "area": "holding", "address": 17828, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Exchange 19 (DEPJ)", "group": "Actual values parameters", "area": "holding", "address": 17829, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 0 (DSP0)", "group": "Actual values parameters", "area": "holding", "address": 17830, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 1 (DSP1)", "group": "Actual values parameters", "area": "holding", "address": 17831, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 2 (DSP2)", "group": "Actual values parameters", "area": "holding", "address": 17832, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 3 (DSP3)", "group": "Actual values parameters", "area": "holding", "address": 17833, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 4 (DSP4)", "group": "Actual values parameters", "area": "holding", "address": 17834, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 5 (DSP5)", "group": "Actual values parameters", "area": "holding", "address": 17835, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 6 (DSP6)", "group": "Actual values parameters", "area": "holding", "address": 17836, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 7 (DSP7)", "group": "Actual values parameters", "area": "holding", "address": 17837, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 8 (DSP8)", "group": "Actual values parameters", "area": "holding", "address": 17838, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 9 (DSP9)", "group": "Actual values parameters", "area": "holding", "address": 17839, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 10 (DSPA)", "group": "Actual values parameters", "area": "holding", "address": 17840, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 11 (DSPB)", "group": "Actual values parameters", "area": "holding", "address": 17841, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 12 (DSPC)", "group": "Actual values parameters", "area": "holding", "address": 17842, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 13 (DSPD)", "group": "Actual values parameters", "area": "holding", "address": 17843, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 14 (DSPE)", "group": "Actual values parameters", "area": "holding", "address": 17844, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 15 (DSPF)", "group": "Actual values parameters", "area": "holding", "address": 17845, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 16 (DSPG)", "group": "Actual values parameters", "area": "holding", "address": 17846, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 17 (DSPH)", "group": "Actual values parameters", "area": "holding", "address": 17847, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 18 (DSPI)", "group": "Actual values parameters", "area": "holding", "address": 17848, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "dPAC Persistent 19 (DSPJ)", "group": "Actual values parameters", "area": "holding", "address": 17849, "type": "int16", "access": "RW", "description": "Range -32767 ... 32767"}, {"name": "RSTP option module actual configuration (ST1A)", "group": "Status parameters", "area": "holding", "address": 17905, "type": "uint16"}, {"name": "RSTP option module configuration (ST1C)", "group": "Configuration and settings", "area": "holding", "address": 17906, "type": "uint16", "access": "RW"}, {"name": "RSTP option module service status (ST1S)", "group": "Status parameters", "area": "holding", "address": 17907, "type": "uint16"}, {"name": "RSTP option module modification status (ST1V)", "group": "Status parameters", "area": "holding", "address": 17908, "type": "uint16"}, {"name": "PWR Bricks configured (bit 0 - bit 11) (PWRC)", "group": "Identification parameters", "area": "holding", "address": 39401, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "ON lock response (LKOR)", "group": "Configuration and settings", "area": "holding", "address": 39470, "type": "uint16", "access": "RW", "description": "Factory setting [Warning] ALRM"}, {"name": "ON lock time delay (LKOD)", "group": "Configuration and settings", "area": "holding", "address": 39471, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Range 0.0 s ... 300.0 s; Factory setting 0.0 s"}, {"name": "ON lock assignment (LKOS)", "group": "Configuration and settings", "area": "holding", "address": 39472, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Not assigned] NO"}, {"name": "AFE Bricks configured (bit 0 - bit 11) (BAFC)", "group": "Identification parameters", "area": "holding", "address": 39500, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "AFE : Thermal state (THDA)", "group": "Measurement parameters", "area": "holding", "address": 39714, "type": "uint16", "unit": "%", "description": "Range 0 % ... 200 %"}, {"name": "ATVP pump average stress (XVS)", "group": "Actual values parameters", "area": "holding", "address": 62516, "type": "uint16", "scale": 0.1, "unit": "%", "description": "Range 0.0 % ... 3276.7 %"}, {"name": "ATVP VSD remaining useful life (XVL)", "group": "Actual values parameters", "area": "holding", "address": 62517, "type": "uint16", "scale": 0.1, "unit": "yrs", "description": "Range 0.0 yrs ... 3276.7 yrs"}, {"name": "ATVP VSD errors register 1 (XVE1)", "group": "Actual values parameters", "area": "holding", "address": 62518, "type": "uint16"}, {"name": "ATVP VSD failures register 1 (XVF1)", "group": "Actual values parameters", "area": "holding", "address": 62520, "type": "uint16"}, {"name": "ATVP VSD failure risk register 1 (XVR1)", "group": "Actual values parameters", "area": "holding", "address": 62522, "type": "uint16"}, {"name": "ATVP VSD low recommandation register 1 (XVL1)", "group": "Actual values parameters", "area": "holding", "address": 62524, "type": "uint16"}, {"name": "ATVP VSD medium recommandation register 1 (XVM1)", "group": "Actual values parameters", "area": "holding", "address": 62526, "type": "uint16"}, {"name": "ATVP VSD high recommandation register 1 (XVH1)", "group": "Actual values parameters", "area": "holding", "address": 62528, "type": "uint16"}, {"name": "ATVP pump average stress (XPS)", "group": "Actual values parameters", "area": "holding", "address": 62544, "type": "uint16", "scale": 0.1, "unit": "%", "description": "Range 0.0 % ... 3276.7 %"}, {"name": "ATVP pump remaining useful life (XPL)", "group": "Actual values parameters", "area": "holding", "address": 62545, "type": "uint16", "scale": 0.1, "unit": "yrs", "description": "Range 0.0 yrs ... 3276.7 yrs"}, {"name": "ATVP pump errors register 1 (XPE1)", "group": "Actual values parameters", "area": "holding", "address": 62546, "type": "uint16"}, {"name": "ATVP pump failures register 1 (XPF1)", "group": "Actual values parameters", "area": "holding", "address": 62548, "type": "uint16"}, {"name": "ATVP pump failure risk register 1 (XPR1)", "group": "Actual values parameters", "area": "holding", "address": 62550, "type": "uint16"}, {"name": "ATVP pump low recommandation register 1 (XPL1)", "group": "Actual values parameters", "area": "holding", "address": 62552, "type": "uint16"}, {"name": "ATVP pump medium recommandation register 1 (XPM1)", "group": "Actual values parameters", "area": "holding", "address": 62554, "type": "uint16"}, {"name": "ATVP pump high recommandation register 1 (XPH1)", "group": "Actual values parameters", "area": "holding", "address": 62556, "type": "uint16"}, {"name": "ATVP VSD instant stress (XVI)", "group": "Actual values parameters", "area": "holding", "address": 62558, "type": "uint16", "scale": 0.1, "unit": "%", "description": "Range 0.0 % ... 3276.7 %"}, {"name": "ATVP pump onstant stress (XPI)", "group": "Actual values parameters", "area": "holding", "address": 62560, "type": "uint16", "scale": 0.1, "unit": "%", "description": "Range 0.0 % ... 3276.7 %"}, {"name": "Application asset rated remaining useful life (PRUL)", "group": "Configuration and settings", "area": "holding", "address": 62572, "type": "uint16", "scale": 0.1, "unit": "yrs", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 yrs ... 3276.7 yrs; Factory setting 15.0 yrs"}, {"name": "Inlet pressure corrective offset (PS1O)", "group": "Configuration and settings", "area": "holding", "address": 62574, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "Outlet pressure corrective offset (PS2O)", "group": "Configuration and settings", "area": "holding", "address": 62575, "type": "int16", "access": "RW", "description": "Unit: Refer to programming manual; Writable only when the motor is stopped; Range -32767 ... 32767; Factory setting 0"}, {"name": "Inlet pressure corrective gain (PS1G)", "group": "Configuration and settings", "area": "holding", "address": 62576, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 % ... 3276.7 %; Factory setting 0.0 %"}, {"name": "Outlet pressure corrective gain (PS2G)", "group": "Configuration and settings", "area": "holding", "address": 62577, "type": "uint16", "scale": 0.1, "unit": "%", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 % ... 3276.7 %; Factory setting 0.0 %"}, {"name": "ATVP pump efficiency loss (XPEL)", "group": "Actual values parameters", "area": "holding", "address": 62579, "type": "uint16", "scale": 0.1, "unit": "%", "description": "Range 0.0 % ... 3276.7 %"}, {"name": "ATVP VSD efficiency loss (XVEL)", "group": "Actual values parameters", "area": "holding", "address": 62580, "type": "uint16", "scale": 0.1, "unit": "%", "description": "Range 0.0 % ... 3276.7 %"}, {"name": "Motor rated remaining useful life (MRUL)", "group": "Configuration and settings", "area": "holding", "address": 62582, "type": "uint16", "scale": 0.1, "unit": "yrs", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 yrs ... 3276.7 yrs; Factory setting 15.0 yrs"}, {"name": "VSD rated remaining useful life (VRUL)", "group": "Configuration and settings", "area": "holding", "address": 62583, "type": "uint16", "scale": 0.1, "unit": "yrs", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 yrs ... 3276.7 yrs; Factory setting 15.0 yrs"}, {"name": "ATV Predict activation (APM)", "group": "Configuration and settings", "area": "holding", "address": 62584, "type": "uint16", "access": "RW", "enum": {"0": "ATV Predict feature not activated", "1": "ATV Predict feature activated"}, "description": "Writable only when the motor is stopped; Factory setting [ATV Predict feature not activated] NO"}, {"name": "ATV Predict commissioning status (APCS)", "group": "Status parameters", "area": "holding", "address": 62585, "type": "uint16", "access": "RW", "enum": {"0": "[None] (NONE)", "1": "[None] (PROG)", "2": "[None] (DONE)"}, "description": "Writable only when the motor is stopped; Factory setting [None] NONE"}, {"name": "ATV Predict license status (APLS)", "group": "Status parameters", "area": "holding", "address": 62586, "type": "uint16", "enum": {"0": "Not active", "1": "Active", "2": "Expiring soon", "3": "Expired", "4": "Error"}}, {"name": "ATVP assets health register (XAHL)", "group": "Actual values parameters", "area": "holding", "address": 62589, "type": "uint16"}, {"name": "ATVP warning context register (ATVA)", "group": "Actual values parameters", "area": "holding", "address": 62590, "type": "uint16"}, {"name": "Control Scope Assignment 1 (PSA1)", "group": "Configuration and settings", "area": "holding", "address": 63130, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 6"}, {"name": "Control Scope Assignment 2 (PSA2)", "group": "Configuration and settings", "area": "holding", "address": 63131, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 7"}, {"name": "Control Scope Assignment 3 (PSA3)", "group": "Configuration and settings", "area": "holding", "address": 63132, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 9"}, {"name": "Control Scope Assignment 4 (PSA4)", "group": "Configuration and settings", "area": "holding", "address": 63133, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 2"}, {"name": "Control Scope Data 1 (PSD1)", "group": "Actual values parameters", "area": "holding", "address": 63134, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "Control Scope Data 2 (PSD2)", "group": "Actual values parameters", "area": "holding", "address": 63135, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "Control Scope Data 3 (PSD3)", "group": "Actual values parameters", "area": "holding", "address": 63136, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "Control Scope Data 4 (PSD4)", "group": "Actual values parameters", "area": "holding", "address": 63137, "type": "int16", "description": "Range -32767 ... 32767"}, {"name": "Stop key enable (PST)", "group": "Configuration and settings", "area": "holding", "address": 64002, "type": "uint16", "access": "RW", "enum": {"0": "Stop key no priority", "1": "Stop key priority", "2": "Stop key priority all CMD channels"}, "description": "Writable only when the motor is stopped; Factory setting [Stop key priority] YES"}, {"name": "Display terminal locked (KLCK)", "group": "Configuration and settings", "area": "holding", "address": 64018, "type": "uint16", "unit": "min", "access": "RW", "description": "Range 0 min ... 10 min; Factory setting 5 min"}, {"name": "Red Backlight (BCKL)", "group": "Configuration and settings", "area": "holding", "address": 64019, "type": "uint16", "access": "RW", "description": "Factory setting [Yes] YES"}, {"name": "HMI displayed value type (MDT)", "group": "Configuration and settings", "area": "holding", "address": 64032, "type": "uint16", "access": "RW", "enum": {"0": "Digital values", "1": "Bar graph", "2": "List of values", "3": "Vu Meter"}, "description": "Factory setting [Digital values] DEC"}, {"name": "Parameters (PVIS)", "group": "Configuration and settings", "area": "holding", "address": 64035, "type": "uint16", "access": "RW", "enum": {"0": "Active parameters", "1": "All parameters"}, "description": "Factory setting [Active parameters] ACT"}, {"name": "Command channel (CMDC)", "group": "Status parameters", "area": "holding", "address": 64040, "type": "uint16"}, {"name": "Channel for reference frequency (RFCC)", "group": "Status parameters", "area": "holding", "address": 64041, "type": "uint16"}, {"name": "Modbus com. status (COM1)", "group": "Status parameters", "area": "holding", "address": 64047, "type": "uint16", "enum": {"0": "R0T0", "1": "R0T1", "2": "R1T0", "3": "R1T1"}}, {"name": "Mdb com stat (COM2)", "group": "Status parameters", "area": "holding", "address": 64048, "type": "uint16"}, {"name": "Energy Dashboard (EMDT)", "group": "Configuration and settings", "area": "holding", "address": 64049, "type": "uint16", "access": "RW", "enum": {"0": "KW counter", "1": "Instantaneous kW trend", "2": "Daily kWh report", "3": "Weekly kWh report", "4": "Monthly kWh report", "5": "Yearly kWh report"}, "description": "Factory setting [Instantaneous kW trend] CVE"}, {"name": "Save configuration (SCSI)", "group": "Configuration and settings", "area": "holding", "address": 64080, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Source configuration (FCSI)", "group": "Configuration and settings", "area": "holding", "address": 64081, "type": "uint16", "access": "RW", "enum": {"0": "Macro configuration", "2": "Configuration 1", "3": "Configuration 2", "4": "Config 3"}, "description": "Writable only when the motor is stopped; Factory setting [Macro configuration] INI"}, {"name": "Pump Screen (PMDT)", "group": "Configuration and settings", "area": "holding", "address": 64087, "type": "uint16", "access": "RW", "enum": {"0": "Parameters list", "1": "Operating time histogram", "2": "Nb of Starts histogram", "3": "Efficiency trend view", "4": "Power vs flow curve", "5": "Head vs flow curve", "6": "Efficiency vs flow curve"}, "description": "Factory setting [Parameters list] NO"}, {"name": "Control Screen selection (CMDT)", "group": "Configuration and settings", "area": "holding", "address": 64088, "type": "uint16", "access": "RW", "enum": {"0": "Parameters list", "1": "PID feedback trend view", "2": "Outlet pressure trend view", "3": "Inlet pressure trend view", "4": "Installation flow trend view"}, "description": "Factory setting [Parameters list] NO"}, {"name": "Ethernet timeout (TOUT)", "group": "Configuration and settings", "area": "holding", "address": 64211, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.0 s ... 60.0 s; Factory setting 2.0 s"}, {"name": "IP mode (IPM)", "group": "Configuration and settings", "area": "holding", "address": 64250, "type": "uint16", "access": "RW", "enum": {"0": "Fixed address", "1": "BOOTP", "2": "DHCP", "3": "DCP"}, "description": "Factory setting Refer to programming manual"}, {"name": "Rate and duplex setting (RDS)", "group": "Configuration and settings", "area": "holding", "address": 64251, "type": "uint16", "access": "RW", "enum": {"0": "Auto detected", "1": "10Mbps full duplex", "2": "10Mbps half duplex", "3": "100Mbps full duplex", "4": "100Mbps half duplex"}, "description": "Factory setting [Auto detected] AUTO"}, {"name": "Actual rate and duplex (ARD)", "group": "Configuration and settings", "area": "holding", "address": 64266, "type": "uint16"}, {"name": "Ethernet error Code (ERR)", "group": "Fault parameters", "area": "holding", "address": 64270, "type": "uint16", "access": "RW", "description": "Range 0 ... 65535; Factory setting 0"}, {"name": "iPar service activation (IPAV)", "group": "Configuration and settings", "area": "holding", "address": 64274, "type": "uint16", "access": "RW", "description": "Factory setting [No] NO"}, {"name": "iPar autosave activation (IPAS)", "group": "Configuration and settings", "area": "holding", "address": 64275, "type": "uint16", "access": "RW", "description": "Factory setting [No] NO"}, {"name": "iPAR local configuration (ICFG)", "group": "Configuration and settings", "area": "holding", "address": 64276, "type": "uint16", "access": "RW", "description": "Factory setting [No] NO"}, {"name": "iPar response to detected error (IPAF)", "group": "Configuration and settings", "area": "holding", "address": 64277, "type": "uint16", "access": "RW", "description": "Factory setting [Yes] YES"}, {"name": "iPar autosave timer (IPAT)", "group": "Configuration and settings", "area": "holding", "address": 64278, "type": "uint16", "access": "RW", "description": "Range 0 ... 9999; Factory setting 10"}, {"name": "iPar service status (IPAE)", "group": "Configuration and settings", "area": "holding", "address": 64279, "type": "uint16", "access": "RW", "enum": {"0": "Idle State", "1": "Init", "2": "Configuration", "3": "Ready", "4": "Operational", "5": "Not Configured", "6": "Unrecoverable error"}, "description": "Factory setting [Idle State] IDLE"}, {"name": "iPar detected error code (IPAD)", "group": "Communication parameters", "area": "holding", "address": 64280, "type": "uint16", "description": "Range 0 ... 5"}, {"name": "IPAR action (IPAA)", "group": "Configuration and settings", "area": "holding", "address": 64284, "type": "uint16", "access": "RW", "enum": {"0": "Inactive", "1": "Save", "2": "Restore"}, "description": "Factory setting [Inactive] DEAC"}, {"name": "IPAR action status (IPAC)", "group": "Configuration and settings", "area": "holding", "address": 64285, "type": "uint16", "enum": {"0": "In Progress", "1": "Save - Success", "2": "Save - Error", "3": "Restore - Success", "4": "Restore - Error"}, "description": "Factory setting [In Progress] EXEC"}, {"name": "Profinet ModbusTCP word order (TWOP)", "group": "Configuration and settings", "area": "holding", "address": 64286, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [Modbus Word Order ON] HIGH"}, {"name": "IPAR configuration selection (IPAM)", "group": "Configuration and settings", "area": "holding", "address": 64287, "type": "uint16", "access": "RW", "enum": {"0": "Active drive configuration", "1": "All drive configurations"}, "description": "Factory setting [Active drive configuration] ACTI"}, {"name": "PNU 1000 behavior (PNU)", "group": "Configuration and settings", "area": "holding", "address": 64288, "type": "uint16", "access": "RW", "enum": {"0": "Conformance mode", "1": "Manufacturer Mode"}, "description": "Factory setting [Conformance mode] PROF"}, {"name": "Command channel (DCC0)", "group": "History parameters", "area": "holding", "address": 64300, "type": "uint16"}, {"name": "Command channel (DCC1)", "group": "History parameters", "area": "holding", "address": 64301, "type": "uint16"}, {"name": "Command channel (DCC2)", "group": "History parameters", "area": "holding", "address": 64302, "type": "uint16"}, {"name": "Command channel (DCC3)", "group": "History parameters", "area": "holding", "address": 64303, "type": "uint16"}, {"name": "Command channel (DCC4)", "group": "History parameters", "area": "holding", "address": 64304, "type": "uint16"}, {"name": "Command channel (DCC5)", "group": "History parameters", "area": "holding", "address": 64305, "type": "uint16"}, {"name": "Command channel (DCC6)", "group": "History parameters", "area": "holding", "address": 64306, "type": "uint16"}, {"name": "Command channel (DCC7)", "group": "History parameters", "area": "holding", "address": 64307, "type": "uint16"}, {"name": "Command channel (DCC8)", "group": "History parameters", "area": "holding", "address": 64308, "type": "uint16"}, {"name": "Channel for reference frequency (DRC0)", "group": "History parameters", "area": "holding", "address": 64310, "type": "uint16"}, {"name": "Channel for reference frequency (DRC1)", "group": "History parameters", "area": "holding", "address": 64311, "type": "uint16"}, {"name": "Channel for reference frequency (DRC2)", "group": "History parameters", "area": "holding", "address": 64312, "type": "uint16"}, {"name": "Channel for reference frequency (DRC3)", "group": "History parameters", "area": "holding", "address": 64313, "type": "uint16"}, {"name": "Channel for reference frequency (DRC4)", "group": "History parameters", "area": "holding", "address": 64314, "type": "uint16"}, {"name": "Channel for reference frequency (DRC5)", "group": "History parameters", "area": "holding", "address": 64315, "type": "uint16"}, {"name": "Channel for reference frequency (DRC6)", "group": "History parameters", "area": "holding", "address": 64316, "type": "uint16"}, {"name": "Channel for reference frequency (DRC7)", "group": "History parameters", "area": "holding", "address": 64317, "type": "uint16"}, {"name": "Channel for reference frequency (DRC8)", "group": "History parameters", "area": "holding", "address": 64318, "type": "uint16"}, {"name": "Channel for reference frequency (DRC9)", "group": "History parameters", "area": "holding", "address": 64319, "type": "uint16"}, {"name": "Channel for reference frequency (DRCA)", "group": "History parameters", "area": "holding", "address": 64320, "type": "uint16"}, {"name": "Channel for reference frequency (DRCB)", "group": "History parameters", "area": "holding", "address": 64321, "type": "uint16"}, {"name": "Channel for reference frequency (DRCC)", "group": "History parameters", "area": "holding", "address": 64322, "type": "uint16"}, {"name": "Channel for reference frequency (DRCD)", "group": "History parameters", "area": "holding", "address": 64323, "type": "uint16"}, {"name": "Channel for reference frequency (DRCE)", "group": "History parameters", "area": "holding", "address": 64324, "type": "uint16"}, {"name": "Channel for reference frequency (DRCF)", "group": "History parameters", "area": "holding", "address": 64325, "type": "uint16"}, {"name": "Command channel (DCC9)", "group": "History parameters", "area": "holding", "address": 64330, "type": "uint16"}, {"name": "Command channel (DCCA)", "group": "History parameters", "area": "holding", "address": 64331, "type": "uint16"}, {"name": "Command channel (DCCB)", "group": "History parameters", "area": "holding", "address": 64332, "type": "uint16"}, {"name": "Command channel (DCCZ)", "group": "History parameters", "area": "holding", "address": 64333, "type": "uint16"}, {"name": "Command channel (DCCD)", "group": "History parameters", "area": "holding", "address": 64334, "type": "uint16"}, {"name": "Command channel (DCCE)", "group": "History parameters", "area": "holding", "address": 64335, "type": "uint16"}, {"name": "Command channel (DCCF)", "group": "History parameters", "area": "holding", "address": 64336, "type": "uint16"}, {"name": "IP mode Ethernet Embd (IM00)", "group": "Configuration and settings", "area": "holding", "address": 64400, "type": "uint16", "access": "RW", "description": "Factory setting [DHCP] DHCP"}, {"name": "Ethernet rate data (ARDE)", "group": "Configuration and settings", "area": "holding", "address": 64413, "type": "uint16"}, {"name": "Ethernet embedded : time-out (TTOB)", "group": "Configuration and settings", "area": "holding", "address": 64415, "type": "uint16", "scale": 0.1, "unit": "s", "access": "RW", "description": "Writable only when the motor is stopped; Range 0.1 s ... 30.0 s; Factory setting 10.0 s"}, {"name": "Ethernet embedded Rx frames (ERXE)", "group": "Configuration and settings", "area": "holding", "address": 64416, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 ... 4294967295"}, {"name": "Ethernet embedded Tx frames (ETXE)", "group": "Configuration and settings", "area": "holding", "address": 64418, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 ... 4294967295"}, {"name": "Ethernet embedded error frames (EERE)", "group": "Configuration and settings", "area": "holding", "address": 64420, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 ... 4294967295"}, {"name": "FDR error status (FDR0)", "group": "Configuration management", "area": "holding", "address": 64432, "type": "uint16"}, {"name": "FDR operating state (FDS0)", "group": "Configuration management", "area": "holding", "address": 64433, "type": "uint16"}, {"name": "FDR action (FDA0)", "group": "Configuration management", "area": "holding", "address": 64434, "type": "uint16", "access": "RW", "description": "Factory setting [NOT ACTIVE] IDLE"}, {"name": "Enable FDR function (FDV0)", "group": "Configuration management", "area": "holding", "address": 64435, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "FDR error status (FDR1)", "group": "Configuration and settings", "area": "holding", "address": 64442, "type": "uint16"}, {"name": "FDR operating state (FDS1)", "group": "Configuration and settings", "area": "holding", "address": 64443, "type": "uint16"}, {"name": "FDR action (FDA1)", "group": "Configuration and settings", "area": "holding", "address": 64444, "type": "uint16", "access": "RW", "description": "Factory setting [NOT ACTIVE] IDLE"}, {"name": "Enable FDR function (FDV1)", "group": "Configuration and settings", "area": "holding", "address": 64445, "type": "uint16", "access": "RW", "description": "Writable only when the motor is stopped; Factory setting [No] NO"}, {"name": "Ethernet option IP mode (IM10)", "group": "Configuration and settings", "area": "holding", "address": 64450, "type": "uint16", "access": "RW", "description": "Factory setting [DHCP] DHCP"}, {"name": "Ethernet option Rx frames (ERXO)", "group": "Configuration and settings", "area": "holding", "address": 64466, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 ... 4294967295"}, {"name": "Ethernet option Tx frames (ETXO)", "group": "Configuration and settings", "area": "holding", "address": 64468, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 ... 4294967295"}, {"name": "Ethernet option error frames (EERO)", "group": "Configuration and settings", "area": "holding", "address": 64470, "type": "uint32", "access": "RW", "description": "32-bit: the source does not state the word order (high word first assumed); Range 0 ... 4294967295"}, {"name": "Package version (PKVS)", "group": "Status parameters", "area": "holding", "address": 65491, "type": "uint16", "description": "Range 0 ... 65535"}, {"name": "Package type (PKTP)", "group": "Status parameters", "area": "holding", "address": 65492, "type": "uint16", "enum": {"0": "Product package", "1": "Module package", "2": "Spare parts package", "3": "Customized package", "4": "Indus package", "5": "No package"}}, {"name": "Abort firmware update (FWCL)", "group": "Configuration and settings", "area": "holding", "address": 65493, "type": "uint16", "access": "RW", "description": "Factory setting [No] NO"}, {"name": "Firmware Update error code (FWER)", "group": "Status parameters", "area": "holding", "address": 65494, "type": "uint16", "enum": {"0": "No error", "1": "Lock error", "2": "Package error", "3": "Package compatibility error", "4": "Ask error", "5": "Reset device error", "6": "Configuration saving warning", "7": "Conf loading warning", "8": "Post Script warning", "9": "Package Description error", "10": "Package not found", "11": "Power Supply error", "12": "Boot M3 error", "13": "Boot C28 error", "14": "M3 error", "15": "C28 error", "16": "CPLD error", "17": "Boot power error", "18": "Embedded ethernet boot error", "19": "Embedded ethernet error", "20": "Embedded ethernet WebServer error", "21": "Module ethernet boot error", "22": "Module ethernet error", "23": "Module ethernet WebServer error", "24": "Password enabled", "25": "Flash error", "26": "Package error", "27": "Wait"}}, {"name": "Update firmware (FWAP)", "group": "Configuration and settings", "area": "holding", "address": 65495, "type": "uint16", "description": "Factory setting [No] NO"}, {"name": "Firmware Update Status (FWST)", "group": "Status parameters", "area": "holding", "address": 65499, "type": "uint16", "enum": {"0": "Firmware update inactive", "1": "Power update in progress", "2": "Power update pending", "3": "Firmware update ready", "4": "Firmware update inactive", "5": "Firmware update succeded", "6": "Update error", "7": "Firmware update in progress", "8": "Firmware update requested", "9": "Transfer In Progress", "10": "Transfer Done", "11": "Package cleared", "12": "Firmware update succeded with warnings", "13": "Device state error", "14": "Package error", "15": "Saving current configuration", "16": "Post Script"}} ] }