Kael Multiser 01 96 Multiser 11 96 Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/kael/multiser-01-96-multiser-11-96.mbmap.json · 7 KB · history
- SHA-256
- 04dfdbd970f6655cfd6a6be0fcb289c609c678998e385cf48b3ce362cd0c6abb
- Manufacturer
- kael.com.tr
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table kael/multiser-01-96-multiser-11-96; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/kael-multiser-01-96-multiser-11-96.htm. Not verified against the manufacturer's documentation
- Kael Multiser 01 96 Multiser 11 96.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 1 | uint16 | R | ||||
| HR | 2 | uint32 ABCD | R | ||||
| HR | 4 | uint16 | R | ||||
| HR | 5 | uint16 | R | ||||
| HR | 6 | uint16 | R | ||||
| HR | 7 | uint16 | R | ||||
| HR | 8 | uint16 | R | ||||
| HR | 4092 | uint16 | R | ||||
| HR | 4093 | uint16 | R | ||||
| HR | 4094 | uint16 | R | ||||
| HR | 4095 | uint16 | R | ||||
| HR | 4096 | uint16 | R | ||||
| HR | 4097 | uint16 | R | ||||
| HR | 4098 | uint16 | R | ||||
| HR | 4099 | uint16 | R | ||||
| HR | 4100 | uint16 | R | ||||
| HR | 4101 | uint16 | R | ||||
| HR | 4102 | uint16 | R | ||||
| HR | 4103 | uint16 | R | ||||
| HR | 4104 | int16 | R | ||||
| HR | 4105 | int16 | R | ||||
| HR | 4106 | int16 | R | ||||
| HR | 4107 | int16 | R | ||||
| HR | 4108 | int16 | R | ||||
| HR | 4109 | int16 | R | ||||
| HR | 4110 | uint16 | R | ||||
| HR | 4111 | uint16 | R | ||||
| HR | 4112 | uint16 | R | ||||
| HR | 4113 | int16 | R | ||||
| HR | 4114 | int16 | R | ||||
| HR | 4115 | int16 | R | ||||
| HR | 4116 | int16 | R | ||||
| HR | 4117 | int16 | R | ||||
| HR | 4118 | int16 | R | ||||
| HR | 4119 | int16 | R | ||||
| HR | 4120 | int16 | R | ||||
| HR | 4121 | int16 | R | ||||
| HR | 4122 | uint16 | R | ||||
| HR | 4123 | uint16 | R | ||||
| HR | 4124 | int16 | R | ||||
| HR | 4125 | uint16 | R | ||||
| HR | 4126 | uint16 | R | ||||
| HR | 4127 | uint16 | R | ||||
| HR | 4133 | uint16 | R | ||||
| HR | 4134 | uint16 | R | ||||
| HR | 4135 | uint16 | R | ||||
| HR | 4136 | uint16 | R | ||||
| HR | 4137 | uint16 | R | ||||
| HR | 4138 | uint16 | R | ||||
| HR | 4139 | uint16 | R |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).