Schneider Electric EM7200 Modbus register map
- Unofficial
- 50 registers
- Revision 2
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 2
- Added
- ()
- File
- maps/schneider-electric/em7200.mbmap.json · 6 KB · history
- SHA-256
- 287abf03f148d89461212837e67b503f2c00cb7eb9cef1b1f1d823714c3037ba
- Manufacturer
- se.com
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table schneider/electric-em7200; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/schneider-electric-em7200.htm. Not verified against the manufacturer's documentation
- Schneider Electric EM7200.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 30 | string[20] | R | ||||
| HR | 50 | string[20] | R | ||||
| HR | 70 | string[20] | R | ||||
| HR | 90 | uint16 | R | ||||
| HR | 130 | uint32 ABCD | R | ||||
| HR | 136 | string[5] | R | ||||
| HR | 141 | uint16 | R | ||||
| HR | 142 | uint16 | R | ||||
| HR | 143 | uint16 | R | ||||
| HR | 144 | uint16 | R | ||||
| HR | 145 | uint16 | R | ||||
| HR | 146 | uint16 | R | ||||
| HR | 147 | uint16 | R | ||||
| HR | 148 | uint16 | R | ||||
| HR | 149 | uint16 | R | ||||
| HR | 150 | uint16 | R | ||||
| HR | 151 | uint16 | R | ||||
| HR | 152 | uint16 | R | ||||
| HR | 153 | uint16 | R | ||||
| HR | 154 | uint16 | R | ||||
| HR | 155 | uint16 | R | ||||
| HR | 156 | uint16 | R | ||||
| HR | 157 | uint16 | R | ||||
| HR | 158 | uint16 | R | ||||
| HR | 159 | uint16 | R | ||||
| HR | 160 | uint16 | R | ||||
| HR | 161 | uint16 | R | ||||
| HR | 1637 | uint16 | R | ||||
| HR | 1638 | uint16 | R | ||||
| HR | 1639 | uint16 | R | ||||
| HR | 1640 | uint16 | R | ||||
| HR | 1641 | uint16 | R | ||||
| HR | 1642 | uint16 | R | ||||
| HR | 1643 | uint16 | R | ||||
| HR | 1644 | uint16 | R | ||||
| HR | 1645 | uint16 | R | ||||
| HR | 1646 | uint16 | R | ||||
| HR | 1701 | uint16 | R | ||||
| HR | 1702 | uint16 | R | ||||
| HR | 1703 | uint16 | R | ||||
| HR | 1704 | uint16 | R | ||||
| HR | 1705 | uint16 | R | ||||
| HR | 1706 | uint16 | R | ||||
| HR | 1707 | uint16 | R | ||||
| HR | 1708 | uint16 | R | ||||
| HR | 1709 | uint16 | R | ||||
| HR | 1710 | uint16 | R | ||||
| HR | 1715 | uint16 | R | ||||
| HR | 1716 | uint16 | R | ||||
| HR | 1828 | uint16 | R |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).