Entes EPR04 Modbus register map
- Unofficial
- 50 registers
- Revision 3 · 2026-11-10
Unofficial: Copied from an unofficial source and not tested. Read it as a draft and check a value on the real device before you rely on the rest. Check the map against the manufacturer's documentation before you write to a live device. Tested it? Report a test.
Communication
- Protocol
- Modbus TCP and RTUdefault
- Unit ID
- 1default
- TCP port
- 502default
- Serial
- 9600 8E1 · 9600 baud, 8 data bits, even parity, 1 stop bit defaults
- Byte / word order
- ABCD · bytes big-endian, words high first
- Addresses
- 0-based
Connection values are defaults: the device may be configured differently.
Map
- Registers
- 50 holding registers
- Revision
- 3 · 2026-11-10
- Added
- ()
- File
- maps/entes/epr04.mbmap.json · 8 KB · history
- SHA-256
- c1ee81c9b9044bfe70d0cb5c3f74f59ab09e801638aa8f57f119654f116f204a
- Manufacturer
- entes.com.tr
Sources and notes
Source: Modbus Database (Jibril Sharafi, MIT licence), table entes/epr04; https://www.aggsoft.com/serial-data-logger/tutorials/modbus-data-logging/entes-epr04.htm. Not verified against the manufacturer's documentation
- Entes EPR04.
- Converted automatically from the Modbus Database (MIT licence, Jibril Sharafi).
- Not verified against the manufacturer's documentation. The byte order is a guess: the source does not give one.
- Corrections are welcome (CONTRIBUTING.md). Change x_status once this table has been checked against the manual.
- Types, scaling and units corrected from the EPR-04S Modbus register table (32-bit values, ratios as in the table). This model has no manufacturer table of its own, so the map stays unofficial.
| Area | Address | Name | Type | Access | Unit | Scale | Description |
|---|---|---|---|---|---|---|---|
| HR | 20 | int32 ABCD | R | W | ×0.1 | ||
| HR | 22 | int32 ABCD | R | W | ×0.1 | ||
| HR | 24 | int32 ABCD | R | W | ×0.1 | ||
| HR | 26 | int32 ABCD | R | var | ×0.1 | ||
| HR | 28 | int32 ABCD | R | var | ×0.1 | ||
| HR | 30 | int32 ABCD | R | var | ×0.1 | ||
| HR | 32 | uint32 ABCD | R | VA | ×0.1 | ||
| HR | 34 | uint32 ABCD | R | VA | ×0.1 | ||
| HR | 36 | uint32 ABCD | R | VA | ×0.1 | ||
| HR | 38 | int32 ABCD | R | ×0.001 | |||
| HR | 40 | int32 ABCD | R | ×0.001 | |||
| HR | 42 | int32 ABCD | R | ×0.001 | |||
| HR | 44 | int32 ABCD | R | W | ×0.1 | ||
| HR | 46 | int32 ABCD | R | W | ×0.1 | ||
| HR | 48 | int32 ABCD | R | var | ×0.1 | ||
| HR | 50 | int32 ABCD | R | var | ×0.1 | ||
| HR | 52 | uint32 ABCD | R | VA | ×0.1 | ||
| HR | 54 | int32 ABCD | R | ×0.001 | |||
| HR | 56 | int32 ABCD | R | ×0.001 | |||
| HR | 58 | uint32 ABCD | R | Hz | ×0.01 | ||
| HR | 86 | uint64 ABCD | RW | Wh | |||
| HR | 90 | uint64 ABCD | RW | Wh | |||
| HR | 94 | uint64 ABCD | RW | Wh | |||
| HR | 98 | uint64 ABCD | RW | Wh | |||
| HR | 102 | uint64 ABCD | RW | Wh | |||
| HR | 106 | uint64 ABCD | RW | Wh | |||
| HR | 110 | uint64 ABCD | RW | Wh | |||
| HR | 114 | uint64 ABCD | RW | Wh | |||
| HR | 136 | int32 ABCD | R | W | ×0.1 | ||
| HR | 138 | int32 ABCD | R | W | ×0.1 | ||
| HR | 140 | int32 ABCD | R | W | ×0.1 | ||
| HR | 142 | int32 ABCD | R | var | ×0.1 | ||
| HR | 144 | int32 ABCD | R | var | ×0.1 | ||
| HR | 146 | int32 ABCD | R | var | ×0.1 | ||
| HR | 148 | uint32 ABCD | R | VA | ×0.1 | ||
| HR | 150 | uint32 ABCD | R | VA | ×0.1 | ||
| HR | 152 | uint32 ABCD | R | VA | ×0.1 | ||
| HR | 154 | int32 ABCD | R | W | ×0.1 | ||
| HR | 156 | int32 ABCD | R | W | ×0.1 | ||
| HR | 158 | int32 ABCD | R | var | ×0.1 | ||
| HR | 160 | int32 ABCD | R | var | ×0.1 | ||
| HR | 162 | uint32 ABCD | R | VA | ×0.1 | ||
| HR | 182 | int32 ABCD | R | W | ×0.1 | ||
| HR | 184 | int32 ABCD | R | W | ×0.1 | ||
| HR | 186 | int32 ABCD | R | W | ×0.1 | ||
| HR | 188 | int32 ABCD | R | var | ×0.1 | ||
| HR | 190 | int32 ABCD | R | var | ×0.1 | ||
| HR | 192 | int32 ABCD | R | var | ×0.1 | ||
| HR | 194 | uint32 ABCD | R | VA | ×0.1 | ||
| HR | 196 | uint32 ABCD | R | VA | ×0.1 |
No registers match
Try part of the name, an address (decimal or 0x hex) or clear the filters.
Help improve this map
- I tested it on a deviceReport whether it worked, even if you did not write the map.
- Suggest a correctionEdit the file on GitHub; it opens a pull request.
- Report a problemA wrong address, type, scale or byte order.
- Read the formatWhat each key of the file means (SPEC.md).